Outsight Creamsource MICRO Manuale utente

USER MANUAL

For software v6.0 and above

CS_micro_UG_5PRINT.indd 1 11/08/17 1:11 am

1. Welcome ......................................................................................... 1

2. Getting Started................................................................................2

2.1 What’s included ............................................................................. 2

2.2 Powering Up and Down ................................................................. 3

2.3 Batteries ........................................................................................ 3

3. Water, weather and temperature .................................................... 4

3.1 IP 65 Rating ....................................................................................4

3.2 Temperature..................................................................................4

4. Rigging and Safety...........................................................................5

4.1 Quick Release Yoke........................................................................6

4.2 Universal Mount Plate.................................................................... 7

4.3 3/8” Tapped (threaded) Hole.........................................................8

4.4 Optional Spigot .............................................................................8

5. Controls ........................................................................................ 10

5.1 Control Wheel and Buttons.......................................................... 10

5.2 LCD Display and Menu .................................................................. 11

5.3 Low Battery Warning..................................................................... 11

6. Change Settings with Menus...........................................................12

6.1 Change Colour Temperature ........................................................12

6.2 High Speed Mode.........................................................................13

6.3 Dimming.......................................................................................13

6.4 Special Modes.............................................................................. 14

7. Eﬀects Modes.................................................................................15

7.1 Normal .........................................................................................15

7.2 Dual Level .....................................................................................15

7.3 Strobe and Flashes........................................................................15

7.4 Random Flash ...............................................................................16

7.5 Timed Flash (FlashBandit – sync to shutter)..................................16

7.6 Flash Frames .................................................................................17

8. Syncing ......................................................................................... 18

8.1 Syncing to camera using FlashBandit............................................18

8.2 Calibrate with FlashBandit ............................................................19

8.3 Slave Multiple Creamsource Units ................................................21

9. DMX Control ................................................................................. 22

9.1 Smooth Fading ............................................................................... 23

9.2 DMX Scenarios............................................................................... 23

9.3 External Eﬀect Triggering .............................................................. 23

10. Accessories Port and Pinout Speciﬁcations ....................................24

This manual contains proprietary information, which is protected by copyright. All rights are reserved. No part of this

manual may be photocopied, reproduced or translated in another language without prior written consent from Outsight.

The information in this manual was correct at the time of printing. However, Outsight continues to improve products and

reserves the rights to change speciﬁcation, equipment and operating procedures at any time without notice.

Contents

CS_micro_UG_5PRINT.indd 2 11/08/17 1:11 am

Welcome

Thank you for buying a Creamsource Micro from Outsight.

We design and engineer our products to the highest standards

to be used under the challenging circumstances that come with

motion picture and television production. This unit will give you

years of reliable service.

This manual will explain the multiple functions of the Creamsource

Micro and its capabilities as a stand alone unit as well as working

in sync with other units, cameras and accessories. We are always

eager to ﬁnd out about new and unusual applications for our

products as well as suggestions for future features.

Please let us know about your experiences on social media or

email: ideas@creamsource.com

Chapter 1:

.com/outsightglobal

@OutsightGlobal

outsightglobal

CS_micro_UG_5PRINT.indd 1 11/08/17 1:11 am

3 4 5

Chapter 2: Getting Started

2.1 What’s included:

If you have purchased your Creamsource Micro as an Essential Kit, you will receive

the following:

1. Creamsource Micro Rigging Yoke

2. Creamsource Micro Luminaire ﬁxture

3. Creamsource Micro Power Supply with

Mounting Bracket

4. Creamsource Micro Power Cable

5. Creamsource Micro 60° Lens

CS_micro_UG_5PRINT.indd 2 11/08/17 1:11 am

2.2 Powering Up and Powering Down:

Before you power up make sure you read all the safety warnings (page 33), it won’t

take much time.

• UseonlythepowersupplythatcomeswiththeCreamsourceMicro.Itsinput

is auto-ranging from 100-240V AC, 50/60Hz for use world-wide.

• Attachpower supplytomainpowersource.Withthepower supply turned

OFF, connect the power cable to the light head. This procedure will extend

the life of the connectors.

• TheCreamsourceMicroremembersitslastbrightnesssetting,ifthelightwas

turned on or oﬀ and the last MODE it was used in.

• Upto10m(32ft)ofextensioncablecanberunbetweenthepowersupplyand

the head.

The power should be switched oﬀ before unplugging the cable. There are no

other special procedures for powering down - it can be done at any time without

harm to the unit.

If the external ﬂexible cable of

this luminaire is damaged, it

must be replaced by an original

cable from the manufacturer

or service agent.

2.3 Batteries

The Creamsource Micro can be run on DC battery power directly with no

additional hardware required. Any voltage source between 10V and 32V which is

capable of 80 watts draw can be used. The LED array will turn oﬀ if the voltage falls

below 10V, so it is advisable to use 14.4V or higher for best performance.

CS_micro_UG_5PRINT.indd 3 11/08/17 1:11 am

Chapter 3: Water, Weather and Temperature

The IP65 rating of the Creamsource Micro Head means it can survive low pressure

waterjetsinalldirections,BUTnotfullsubmersion.Italsomeansthatithasahigh

resistance to dust and dirt. Still precautions are advised.

Note that the standard accessories are not water resistant - for

example battery mount, remote, power supply etc.

Temperature

As the Creamsource Micro is a high-power device, it will get hot during normal

operation, and care must be taken when touching the unit.

• The maximum surface temperature of the lamp head will be 60º C/140ºF,

whenoperatedinanambienttemperatureof25ºC/77ºF

• Maximumambienttemperaturefornormaloperationis40ºC/104ºF.

CS_micro_UG_5PRINT.indd 4 11/08/17 1:11 am

Chapter 4: Rigging and Safety

Recommended rigging position for the Creamsource Micro is with the cooling

ﬁns in a vertical orientation. This allows for the best natural cooling of the unit.

ItcanbemountedinotherpositionsBUTcaremustbetakennottosmotherthe

cooling ﬁns on the back of the unit. Keep a 10cm/4in. clearance around the unit

to maintain air ﬂow.

If rigging the unit above people, from vehicles, moving platforms, or hanging from

any rigging, be sure to secure the unit through the safety-cable holes located

at each end of the unit using approved and correctly rated safety cables, chains

or carabiners.

Use appropriate safety cable for 4kg load. If the unit is to be

mounted suspended, it is necessary to replace the standard spigot

with a 28mm DIN or Euro spigot - please contact Outsight for

more details

CS_micro_UG_5PRINT.indd 5 11/08/17 1:11 am

Rigging Options

4.1 Quick Release Yoke:

A combo Junior/Baby spigot - compatible with a large range of stands and

other rigging equipment. The yoke is quickly ﬁtted without tools. Simply

iptheleversoneachsideoftheyoketotheUPposition,andslidetheyoke

onto the unit. Then press the lockers “levers” down to lock.

CS_micro_UG_5PRINT.indd 6 11/08/17 1:11 am

4.2 Universal Mount Plate:

The universal mount plate on the back of the Micro can be used to mount the

Power Supply and Battery mount. It can also be used for rigging - it is compatible

with mounting accessories from Kino Flo, such as the MTP-BF41S (“lollipop”)

mount. To release, lift the spring pin and turn plate counter-clockwise.

CS_micro_UG_5PRINT.indd 7 11/08/17 1:11 am

4.4 Optional Spigot:

Suitable for ﬂoor stand mounting only. (Supplied with ‘Basic Kit’).

4.3 3/8” Tapped (threaded) Hole:

Another mounting option is the 3/8” hole tapped (threaded) directly in

the base of the unit.

CS_micro_UG_5PRINT.indd 8 11/08/17 1:11 am

Indice

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente

Outsight creamsource MICRO Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche