Overline Systems Digitear Beltpack Manuale utente
Version 25-03-2019
Beltpack
User Guide
DE-DPS Beltpack
FCC ID : 2ANZJDEDPS1
IC : 23304-DEDPS1
English
TABLE OF CONTENTS
1 - DESCRIPTION OF THE Beltpack
2 - HOW TO...
2 - 1 ...Turn on the Beltpack
2 - 2 ...Unlock the Beltpack
2 - 3 ...Modify the Volume
2 - 4 ...Connect to a Tx-Box
2 - 5 ...Connect to a Digitear network
2 - 6 ...Change the channel used by the Beltpack
2 - 7 ...Pair an In-Ear
2 - 8 ...Activate Eco mode
2 - 9 ...Delete the list of registered In-Ears
2 - 10 ...Change the battery
3 - ADVANCED FUNCTIONNING OF THE Beltpack
3 - 1 Beltpack start up
3 - 2 Txboxes menu
3 - 3 Wlan menu
3 - 4 Lock menu
3 - 5 Update menu
3 - 6 Connect IE menu
3 - 7 Find IE menu
3 - 8 Mic menu
3 - 9 Channel menu
3 - 10 Low battery display
4 - TECHNICAL FEATURES
5 - WARRANTY
6 - CERTIFICATIONS
User guide available at www.digitear.eu
USER GUIDE Beltpack
Page 1/19
1 - DESCRIPTION OF THE Beltpack
2
3
4
6
7
8 9
1
1
2
3
4
6
7
8
9
Microphone
LCD screen
‘+’ Key
Allows you to navigate within the menus or
to increase a level (volume, gain...)
‘-’ Key
Allows you to navigate within the menus or to dimi-
nish / a level (volume, gain...).
‘MIC’ Key
‘HOME’ Key
3.5mm - 4 points JACK
Battery charge connector
5
5Belt clip
USER GUIDE Beltpack
Page 2/19
2 - HOW TO...
2 - 1 ...Turn ON the Beltpack
To turn on the Beltpack, press and hold the central key until the Overline Systems logo appears.
2 - 2 ...Unlock the Beltpack
Press and hold the central key to unlock the Beltpack and to gain access to the menus.
Select
Txbox
Menu
Menu
Hold for
menu
USER GUIDE Beltpack
Page 3/19
2 - 4 ...Connect to a Tx-Box
To change or connect to a Tx-Box, press on the menu labeled «TxBoxes»
Pair
SET
> TX Box 1
Back
2 - 5 ...Connect to a network
To change or to connect to a network, click on the menu labeled «Wlan». If there is more than
one accessible network, the screen will display all the possible choices.
WiFi
SET
> Digitear
Back
2 - 3 ...Modify the volume
On the main screen, use the + and - keys in order to change the volume. Once the right level is chosen,
confirm using the central key.
OK
-+
Txboxes
Menu
SET
Wlan
Menu
SET
Confirm
Confirm
Confirm
Confirm
USER GUIDE Beltpack
Page 4/19
2 - 7 ...Pair a In-Ear
To pair a In-Ear to the Beltpack, you need to go into the «Connect IE» menu.
Once you confirm this choice the Beltpack will connect itself to the nearest In-Ear.
Note :
- The In-Ear needs to be in «discoverable» mode (See In-Ear User Manual).
- The Beltpack can transmit an audio stream to two In-Ears at a time. The two In-Ears must be paired
during their first use. This will be done automatically (See In-Ear User Manual).
Connect IE
Menu
SET
2 - 8 ...Activate Eco mode
Eco mode allows the optimization of the In-Ear battery’s life.
The principle is to stop the stream between the In-Ear and the Beltpack when no signals are transmitted
from the Beltpacks. A calibration of the noise threshold is done automatically at each activation of the
Eco mode.
The key «Calibrate» allows you to redo a new calibration.
You must perform the calibration during a ambiant silence, or else you will have to redo the calibration
procedure.
Eco Mode
Menu
SET
Eco Mode
SET
Enable
Back
Calibrate
2 - 6 ...Change the channel used by the Beltpack
From the Beltpack, you can change the channel on which the TX-Box was associated to by default during
the initial connection.
To do this you must access the «Channel» menu.
Menu
OK
< Ch 8 >
+
-
Channel
Menu
SET
USER GUIDE Beltpack
Page 5/19
2 - 10 ...Change the battery
A spare battery is provided with the Beltpack.
To change it you must open the Beltpack’s rear cover.
Only this provided battery type must be used.
Battery : Li-ion, BL-5C
2 - 9 ...Delete the list of registered In-Ear
To delete the list, you must go into the «ClearPDL» menu. The list is then emptied out and you can connect
two new In-Ears to the Beltpack.
Clear PDL
Menu
SET
Cl
PD
L
USER GUIDE Beltpack
Page 6/19
3 - ADVANCED FUNCTIONNING OF THE Beltpack
3 - 1 Beltpack start up
Select
TxBox
Menu
Connecting
Digitear
Menu
Ch 2
Menu
The status bar may be different following the connection state and status.
1
2
3 5
46
1Beltpack’s battery level.
2Strength of network signal. If the sign is empty the Beltpack is not connected to any
network.
3A headset is connected to the 3.5mm Jack.
7
4The internal microphone is off:
The configuration of the «Latency Mode» does not permit the use of the Beltpack’s microphone.
(See User guide of the Tx-Box)
5Eco Mode is ON, it will replace the bluetooth sign.
6A In-Ear is connected.
7The connected In-Ear’s battery level.
The Beltpack is connected to a
network, but is not
connected to a TX-Box.
The Beltpack is not connected to a
network.
Press the central key
USER GUIDE Beltpack
Page 7/19
Review of the possible actions in the «TxBoxes» menu.
Txboxes
Menu
SET
3 - 2 Txboxes menu
Pair
SET
No txbox
Back
Pair
SET
TX Box 1
Back
Txboxes
OK
Connected !
Pair
SET
> TX Box 1
Back
Txboxes
Pair
SET
TX Box 1
Back
Txboxes
No TX-Box is available on the
network.
If «Timeout» appears :
- Check the network.
- Check the configuration of the TX-Box.
Disconnecting
Timeout !
OK
USER GUIDE Beltpack
Page 8/19
Wlan
Menu
SET
WLAN
WiFi
SET
Digitear
Back
Scanning
WiFi
Connecting
WiFi
SET
> Digitear
Back
WLAN
OK
Timeout !
Review of the possible actions in the «Wlan» menu.
3 - 3 Wlan menu
if «Timeout» appears :
- Check the network.
- Check the ACCESS POINT configuration.
USER GUIDE Beltpack
Page 9/19
Indice
