Oxdale E300 Istruzioni operative
1
OXDALE PRODUCTS LTD
OPERATING AND MAINTENANCE MANUAL
E300, E400 AND E400D LOG SPLITTER
KEEP FOR FUTURE USE
2
CONTENTS
Safety
3
Labels
Quick Guide Including Transport and Storage
8
In Depth Instructions
11
Warranty Information
18
Technical Specifications
19
Contact Details
20
Declaration of Conformity
21
Electric Motor Instructions
22
34
Notes
3
SAFETY
OXDALE PRODUCTS REQUIRES THAT ANYONE
OPERATING OR MAINTAINING THE LOG SPLITTER SHALL
READ AND UNDERSTAND ALL SAFETY, OPERATION AND
MAINTENANCE DATA CONTAINED IN THIS USER
MANUAL BEFORE USING THE LOG SPLITTER.
The E300, E400 and E400D log splitters are powered by a
single-phase electricity supply and should be used in
conjunction with a P CD (Portable esidual Current Device)
circuit breaker. They can be used indoors or outdoors, but
should be stored in a dry place.
Hydraulic action provides the force to drive a splitting
wedge into a log. Never operate the log splitter if
unauthorized persons are in the area, especially small
children.
Hazards associated with log splitting may be pinch points,
splinters, eye injury and entanglement.
IT IS FOR SINGLE PERSON USE ONLY.
YOU ARE RESPONSIBLE FOR THE SAFE OPERATION
AND MAINTENANCE OF THE LOG SPLITTER. THE
MOST IMPORTANT SAFETY DEVICE ON THE
EQUIPMENT IS THE SAFE OPERATOR.
•Never put hands or fingers between the wedge and the
log to be split or near moving parts. Always stop the
machine before cleaning it or making adjustments.
4
•The operator should wear suitable PPE including eye
protection, gloves and safety boots. Close fitting
clothing should be worn to reduce the risk of
entanglement. The safety decals and other labels on the
machine are shown on the following page.
•Never stand either side of the log splitter whilst
operating. Logs can sometimes split apart violently e.g.
due to knots. Stand in front of the machine to minimise
risk from falling debris.
•Never hold the top of the log whilst setting in place or
splitting.
•Never split two logs on top of each other.
•The log splitter is very powerful but some hard or wet
wood can be difficult to split. Do not force the wedge as
this could cause injury to yourself and cause damage to
the log splitter.
•Never let children operate machinery.
•Do not leave machinery unattended whist it is running.
•Both ends of each log should be cut as square as possible
to help prevent the log from riding out of the splitter.
This is also aided by the three holes in the log platform
having raised edges to reduce the risk of slipping.
•Always choose a working area free from obstructions
and then keep the working area free from obstructions
such as logs and split wood.
•Machine is for single person operation only using both
hands on the operating lever.
•Operate splitter on solid ground level.
33
RELATED PRODUCTS
Sawbench
Available as Electric (240v) or PTO.
Electric – Swinging cradle, 600mm blade,
cuts logs up to 10” diameter.
PTO – Grizzly 700 has a swinging cradle, suitable for logging,
balanced blade for smooth and efficient cutting, 700mm blade
which cuts lots up to 12” diameter.
Log Grab
Available in two
sizes (42cm and
70 cm log
diameter.)
Rear Mounted Crane
Ideal for lifting and moving heavy
items behind your tractor and is
available with or without lifting
chains and timber grab.
32
Oxdale Products Ltd
Units 20 – 21 Foxwood Road
Off Sheepbridge Lane
Chesterfield
S41 9RF
Tel: 01246 529020
Email: sales@oxdaleproducts.co.uk
Web: www.oxdaleproducts.co.uk
Registered Address:
Oxcroft Stables
30 Oxcroft Estate
Stanfree
Derbyshire
S44 6AU
Company Number: 6490139 England & Wales
5
•The log splitter is designed only for splitting wood. Using
it for any other purpose may damage it and be
dangerous to the user and others.
•Ensure that the machine is stable at all times when in
use and is stored safely when not in use in a dry place.
6
LABELS
The electric series log splitters should have the following
labels attached. If any safety decals are missing or illegible
they should be replaced immediately.
SAFETY LABELS
WARNING NOTICES
WARNING!
“Danger! Keep clear of moving parts!”
“To be operated by one person only!”
“Wear hearing protection!” (except electric machines)
“Read instruction manual before use!”
Additionally, on the electric motor unit:
Electrical data and the following safety decal:
31
30
7
Other Information
Manufacturer
Oxdale Products
Unit 20 – 21 Foxwood Road
Off Sheepbridge Lane
Chesterfield
S41 9RF
Year of Construction
Machinery Type
E300
E400
E400D
Mass of Machine
Serial Number
Max. Hydraulic Oil
Operating Pressure
8
QUICK GUIDE
BEFORE FIRST USE
Before the log splitter can be used for the first time:
•Fill the hydraulic oil tank with 15 litres of hydraulic oil 46
until visual contact on the sight glass can be seen.
•Plug the unit into the mains (single phase, 3 pin, 13 amp
socket) in conjunction with a P CD.
•Start the motor.
•am collar to be greased.
PRE – OPERATION CHECKLIST
It is important for both personal safety and maintaining the
food mechanical condition of the log splitter that this
checklist is followed.
•Grease slider every 10 hours of operation and pre/post
season.
•Check that all hydraulic fittings and connections are
tight and in good condition.
•Check for damaged, worn, missing parts and replace if
necessary.
•eplace missing or illegible safety decals.
29
CONNECTION DIAGRAM
28
5. To the capacitor starting and resistance starting motors,
rear end of the frame mounted with centrifugal switch. On
the rear end of the motor base there is furnished a quick-
break centrifugal switch.
When the motor is started and attains to a certain speed
the switch will give a crisp sound of “click, click” and thus
cut off the power supply to the secondary winding with the
motor in normal run
．
When the motor fails to start or when it does start and
attain a certain speed but accompanies with shock and
shriek instead of the crisp click
，
cut off the power supply
immediately and carefully inspect the centrifugal switch
and the capacitor
．
V. Overhaul
In order to insure reliable operation the motor, which
should be carried out at regular intervals, usually once a
year.
9
OPERATING INSTRUCTIONS
•Position the log splitter on solid level ground when
operating.
•Plug the unit into the mains (single phase, 3 pin, 13 amp
socket) in conjunction with a P CD and start the motor.
•Using both hands lift the handle to lower the ram and
lower the handle to raise the ram.
•Operate ram to lift the wedge above the height of the
log to be split.
•Position the centre of the log under the wedge. Move
the wedge using the lever until contact is made with the
log.
•Keep two hands on control levers while splitting log. The
speed can be controlled by how much pressure you put
on the control valve.
•Stop splitting if log starts to go sideways and reposition
per above instructions.
•Should the wedge lodge or become stuck in the log,
return wedge to fully open position and gently rock log
free before continuing.
10
POST OPERATING CHECKS AND MAINTENANCE
•Wipe off your log splitter with a damp cloth periodically
to keep it free from debris.
•The splitting wedge may need to be sharpened
periodically, just using a file.
STORAGE AND TRANSPORTATION
•The electric log splitter should be stored in an upright,
vertical position.
•Store in a dry location.
•Store in a safe location where the machine will not get
knocked over.
•It should be transported in an upright, vertical position.
It should be strapped securely.
27
7. Wiring
Check the wiring connections before the motor is started
．
The motor can be started only when the wiring connection
is made in accordance with the wiring diagram given on the
terminal box
．
If want to change direction of the motor you
may see the wiring diagram to change connection method
of the connection strip that may change the direction.
IV. Maintenance of the Motors
1.Daily Cleaning
The motor in use should always be kept clean. No water
drops or cotton should be allowed to get into the interior
of the motors
．
2. Check on Load Current
While the motor is in operation, constant care should be
taken to keep the Ioad current below the rated value
．
3. Running Sound
During operation of the motor there must be needed no
rubbing sound shrike and other random noise, you should
stop the motor in time and begin to start it again only after
correction has been done
．
4. Temperature of the bearings should be below 95 C when
the motor is running
．
Questo manuale è adatto per i seguenti modelli
2
Altri manuali Oxdale Spaccalegna
Manuali Spaccalegna popolari di altre marche
Scheppach
Scheppach OX 3-1000 Istruzioni per il montaggio
Swisher
Swisher 21200 Manuale utente
Elem Garden Technic
Elem Garden Technic FBHT65-22TCH Manuale utente
Champion Power Equipment
Champion Power Equipment 90720 Manuale
Boss Industrial
Boss Industrial ES5T20 Manuale utente
Villager
Villager LSP 12 T Manuale utente
