Oypla GARDEN 4051 Manuale utente
Page 1
Manual Version: v1.0
Model Code: 4051
Oypla.com LLP / www.oypla.com
User Manual
Model Code: 4051
Contents
1Front Cover
-
2Safety/Warning
Instructions
-
3Assembly
Instructions
-
3Operating
Instructions
-
4Back Cover
End
Lawn Trimmer
Page 2
Manual Version: v1.0
Model Code: 4051
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety/Warning
Instructions
-
3Assembly
Instructions
-
3Operating
Instructions
-
4Back Cover
End
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
•This product is not a toy, and is only
to be used for its designated
purpose.
•Never carry out any alterations or
modifications to this product.
•This product includes small parts that
could cause choking.
•When using the product, use both
handles to assure the product
remains stable.
•Leaving the product exposed to
weather, especially direct sun, rain
and salt air, will speed the
weathering process. This can be
slowed by removing the product
from these conditions, or covering it
with a suitable cover.
•This product is not intended for use
by persons (including children) with
reduced physical, sensory and mental
capacities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the product by
persons responsible for their safety.
•This product is intended for outdoor
use only.
•Clean only with a damp cloth. Do not
use strong industrial cleaning
substances or abrasive materials as
these will damage the product.
•If the product is damaged or has any
defects, please contact
⚠This product contains small parts.
These can be a choking hazard. Keep
AWAY from children.
Warnings
Page 3
Manual Version: v1.0
Model Code: 4051
Oypla.com LLP / www.oypla.com
Parts List:
-If you are missing any of the below parts, please contact
-Please be aware that you will be referring to this parts list throughout
the assembly process.
Part Name:
Quantity:
Bottom Frame
1
Top Frame
1
Edging Blade
1
Bolt
1
Butterfly Nut
1
Cap Nut
1
Washer
2
Contents
1Front Cover
-
2Safety/Warning
Instructions
-
3Assembly
Instructions
-
3Operating
Instructions
-
4Back Cover
End
Assembly Instructions:
1. Attach the bottom frame inside the top frame.
2. To secure this in place, push a bolt through the hole and
secure it in place using a washer and butterfly nut.
3. Slide the edging blade onto the end of the bottom
frame, ensuring that it is all the way down the side pole.
Secure this in place using a washer and a cap nut.
Operating Instructions:
•Wheel the Lawn Edger along the edge of your lawn, whilst doing this the
steel blade trims the over-hanging grass as you go along.
•After every use, clean the edging blade with care, Wipe Clean Only.
•For the best results, use the edging cutter against a hard edge such as
paving or decking.
•Care and practice may be needed when using against flower beds and also
soft edges.
Assembly Instructions
Page 4
Manual Version: v1.0
Model Code: 4051
Oypla.com LLP / www.oypla.com
Contents
1Front Cover
-
2Safety/Warning
Instructions
-
3Assembly
Instructions
-
3Operating
Instructions
-
4Back Cover
End
Altri manuali Oypla GARDEN Tagliabordi
