Oz-View SFW-001-E Manuale utente
User’s Manual
Wireless Digital Video Doorbell
User’s Manual
External Camera
SFW-001-E
Indoor Handset
SFW-001-H
Wireless Digital Video Doorbell
Remark
Please follow the user manual for correct installation and testing, if
there is any doubt, please call our tech-supporting and customer
center.
Our company applies ourselves to reformation and innovation of
our products. No extra informing for any change. The illustration
shown here only used for reference, if there is any difference
please take the actual product as standard product.
CATALOG
Product Features......................................................1
Package Contents ....................................................2
Product Pictures ......................................................3
Installing Batteries ...................................................4
Installation Instruction .............................................5
Diagram ....................................................................6
Settings.....................................................................8
Engineering Mode..................................................16
Operations..............................................................18
Technical Parameters.............................................20
Notes ......................................................................22
2.4" TFT LCD display
Video resolution: 320x240, with 15 frames per second
Wide angle lens and LED for night vision
Long standby door camera (battery or DC 12V)
Waterproof door camera IP55
Microphone and speakerphone
Basic video intercom, monitoring, remote unlock and anti-dismantle alarm feature
Brightness and talk volume are adjustable
Supports up to 2 door cameras and 2 indoor handsets
Transmitting distance: with up to 500m range out of doors
DIY installation to save labor cost
PIR function(Optional, DC12V power supply only)
Product Features
-1-
Package ContentPackage Contents
Lithium Battery
Power AdapterPower Adapter
(12V, 500mA)
Once you have unpacked your product, make sure that all the parts shown below
are available. If any pieces are missing or broken, please promptly call you dealer.
-2-
Parts of door camera
Indoor Handset
SFW-100-H
Charger Base
Parts of indoor handset
External Camera
SFW-001-E
Cable Cover
Screws
Power Adapter
(Optional, for PIR function,12V, 500mA)
User's Manual
User’s Manual
Wireless Digital Video Doorbell
User’s Manual
Wireless Digital Video Doorbell
Model:D-R9 Model:K-R9Model:D-R7
Product Pictures
Door Camera
Indoor Handset
Charger
Charge Pins
-3-
LCD Display
Navigation Key
Right Soft Key
Monitor/ Snapshot
Power/ End Key
Left Soft Key
Unlock Key/
Charger LED
Accept Key
Microphone
Speaker
Battery
Compartment
Cover
Charging Pins
LED Lights
Sensor Light
Speaker
Microphone
Call Button
Camera
PIR(Optional)
Installing Batteries
-4-
Indoor Handset
The rechargeable lithium battery (3.7V, 1100mA) come with your indoor handset.
Install the battery before use.
1.
2. Insert new battery as indicated, matching correct polarity(+,-).
3. To replace the battery cover, slide the cover up until it snaps in place.
Notes:
1. To activate battery please remove protective cover from the battery prior to
use.
2. The battery need to be replaced if they do not recover their full storage
capacities after recharging.
3. When replacing the battery, make sure using good quality re-chargeable
lithium battery. Never use other battery or conventional alkaline battery.
1
2
Lithium battery
Battery case
Battery compartment cover
Protective cover
Installation Instruction
Indoor Handset
Connect the modular end of the AC power adapter to the power jack of the
charger, then plug the AC adapter into a standard AC wall outlet.
-5-
Charging Indoor Handset
! Important Note: Before initial operation, YOU SHOULD FULLY CHARGE THE
INDOOR HANDSET for about 5 hours.
To charge the indoor handset, you should place it on the charger base.
Door Camera
1. Install two C size 1.5V batteries (not supplied) into the battery compartment or
connect with DC 12V power adapter to turn on the door camera(PIR for the DC12V
independent power supply).
2. Drill one screw to fix the battery cover up.
Screw
Battery cover
Battery
Diagram
-6-
Connection Mode 1
Connection Mode 2
DC Power Supply
GND
BAT+
EX-BUT
DC9-12V
BAT+(Optional)
NO
COM
NC
GND
DC9-12V
Backup Power
Lock
GND
For normal
open lock
+
+-
-
DC power
for Lock
The maximum output
current of relay can be 1A
EX-BUT
Lock
For normal
close lock
+
--
+
The maximum output
current of relay can be 1A
Door Camera
Door Camera
DC power
for Lock
DC9-12V
BAT+(Optional)
NO
COM
NC
GND
GND
DC9-12V
GND
BAT+
DC Power Supply
Backup power
Note: The door camera may be powered by the batteries or the power supply
(not included). Do not use batteries and power supply together at the same
time. If the door camera is powered by power supply, the monitor feature is
available. If the door camera is powered by batteries, the monitor feature is not
available until the power mode is changed to power consumption mode (see
page 20).
Questo manuale è adatto per i seguenti modelli
1
Indice
