Hold the IR On/Off button until you feel the device vibrate
Setting Motion Detection
Turn the device on, and then press the start / stop button 3 times.
The device will now have a solid blue light and a flashing red light. Device
is now in motion detection mode.
To stop simply press the Stop / Start button once.
Charging:
Find the USB cable and the charger that was provided with the device, insert one end of
the connecting cable to the “Charge” hole of the device and put the other end to a free PC
usb port.
When charging, the red light and blue light on the chargers are on. When fully charged, the
red light comes on and blue goes out.
(Give at least 3-5 hours for charging time).
Downloading your recordings
Simply plug your device in via the provided USB cable to a windows or Mac PC
You will then be able to access the memory as a removable disk !
