Pacific Star SSABR-B Manuale utente
Heritage Series ADSL Bridge/ Router
ADSL Ethernet Router
Quick Installation Guide
SSABR-B/SSABR-BU
Copyright
All rights reserved. No part of this document may be reproduced in any
form or by any means without written permission from the product
manufacturer.
Changes are periodically made to the information in this document. They
will be incorporated in subsequent editions. The product manufacturer
may make improvements and/or changes in the product described in this
document at any time.
Heritage Series ADSL Bridge/ Router Quick Guide 1
Getting Started
This quick guide provides a quick and easy way to install and configure the
SSABR-B/SSABR-BU ADSL modem/router to match what you need.
The major functions of the SSABR-B/SSABR-BU ADSL modem/router are
performed via Ethernet 10/100Base-T network interface. Your computer has to
installed an Ethernet NIC card and set up the TCP/IP protocol before start to
using your ADSL Ethernet Router.
Factory Default Settings
LAN IP address: 192.168. 7.1
Subnet mask: 255.255.255.0
VPI: 0
VCI: 35
Encapsulation type: RFC 1483 Bridged IP LLC
IMPORTANT:
Please DO NOT change default values if you are unfamiliar with these
settings, try using the device without modification, or contact your DSL
service provider for assistance. We strongly recommend that you
contact your DSL service provider prior to change the default
configuration.
Quick Guide
2
LED Indicators
You can monitor the LEDs during operation. Following table shows the Router
status LEDs and identifies what each LED light means.
Function Behavior Definition
Dark Power offPOWER
Light Power on
Dark Power off
Flashing System training in progress
LINK
(DSL)
Light Ethernet Link is OK
Dark Local network link absent or power off
Flashing Wireline
ACT
(DSL)
Light Local network link established
Dark No data activity or power off
Flashing Data activity occurs
LINK
(LAN)
Light ADSL Link is up
10/100M
(LAN)
Light 100Base-T is running
If the LEDs illuminate as expected, test your Internet connection from a LAN
computer, Open your web browser, and type the URL of any external
website(such as http://www.yahoo.com). The LED labeled ACT(XDSL) should
be blinking rapidly and may appear solid as the device connected to the site.
Heritage Series ADSL Bridge/ Router Quick Guide 3
Hardware Installation
1. Connect the ADSL cable and optional telephone
2. Connect the Ethernet cable
3. Attach the power connector
4. Turn on the SSABR-B/SSABR-BU ADSL modem/router and power up your
system.
Stand-alone computer
AC adapter
Computer Computer Computer
ADSL Ethernet Router
Straight-through cable
to Hub for LAN PCs . 2
3
Wall outlet Wall jack
Straight-through
cable to a PC
or
RS-232C
cable 1
Quick Guide
4
1.1 Configure your Computer
1.1.1 Obtain an IP address from the ADSL modem/router
You do not need to specify an IP address when configuring TCP/IP properties. If
your computer stands alone and is set up to obtain an IP address automatically,
you can move on to section 1.2-Web Configuration.
1.1.2 Manually assign a fixed IP address to your computer
If you prefer to assign an IP address manually, use 192.168.7.x(x is any number
between 2and 254) and subnet mask 255.255.255.0. Specify the gateway as
192.168.7.1. Windows specific instructions follow:
For Windows 95/98/ME:
◆ From Control Panel, double click Network. Scroll down and highlight
TCP/IP (your network card.) Click Properties.
◆ Select the IP Address tab. Enter 192.168.7.x (x is any number between 2and
254). This is the IP address assigned to your computer. Subnet Mask is
255.255.255.0.
◆ Select the Gateway tab. Enter the Router’s IP address 192.168.7.1 and click
Add.
◆ Click OK & then OK to finish. You may be prompted for the Windows CD
and then be asked to restart. Answer Yes to restart the computer.
For Windows 2000/XP:
◆ From Control Panel double click Network Connections. Open local Area
Connections and click Properties. Double click Internet Protocol(TCP/IP).
Select Use the following IP address.
◆ Enter 192.168.7.x (x is any number between 2and 254). This is the IP address
assigned to your computer. Subnet Mask is 255.255.255.0
Heritage Series ADSL Bridge/ Router Quick Guide 5
◆ Enter the Router’s IP 192.168.7.1 as the Default gateway.
◆ Click OK to finish.
You have now finished configuring your computer.Restart your computer, if
necessary.
1. 2 Web-Configuration
Web-Configuration is designed to work best with Microsoft Internet Explorer®
version 5.0, Netscape Navigator® version 4.7, or later versions.
Open your web browser and fill in the following URL address in the web
address (or location) filed, and press <Enter> key.
URL address: http://192.168.7.1 .
You will now see the following screen :
1. For the User Name, type “DSL” (no “” and the word is case sensitive).
2. For the Password, type “DSL” (no “” and the work is case sensitive).
3. Click on the OK button.
Quick Guide
6
You will now see the following screen:
1. Click Quick Configuration at the top of the screen.
Heritage Series ADSL Bridge/ Router Quick Guide 7
You will now see the following screen:
Quick Guide
8
1.2.1 RFC 1483 Bridged Mode (MPoA)
1. Beside ATM Interface, you can setup up to 8(0~7) interface. The default
interface number is 0.
2. Beside Operation Mode, please choose Yes to enable this interface.
3. Beside Encapsulation, use the drop down menu and select 1483
Bridged IP LLC. If your encapsulation is VC multiplexing, choose 1483
Bridged VC-Mux
4. Beside VPI, enter in a value (please consult your ISP for your VPI.
Factory default is 0).
5. Beside VCI, enter in a value (please consult your ISP for your VCI.
Factory default is 35).
6. Beside Bridge, use the drop down menu and select Enabled.
7. Beside IGMP, use the drop down menu and select Disabled to accept
multicast.
8. Beside Use DHCP, place the black dot beside Disable.
9. Beside Default Route, use the drop down menu and select Disabled
10. DO NOT MAKE ANY OTHER CHANGES.
11. Click on the Submit button.
12. Click the Admin tab, and then click Commit&Reboot in the task bar.
13. Click to save changes to permanent storage.
14. Turn off SSABR-B/SSABR-BU, wait 5 seconds and then turn it
back on.
1.2.2 RFC 1483 Routed Mode (MPoA)
1. Beside ATM Interface, you can setup up to 8(0~7) interface. The default
interface number is 0.
2. Beside Operation Mode, please choose Yes to enable this interface.
3. Beside Encapsulation, use the drop down menu and select 1483 Routed
IP LLC. If your encapsulation is VC multiplexing, choose 1483 Routed
IP VC-Mux.
4. Beside VPI, enter in a value (please consult your ISP for your VPI.
Factory default is 0).
5. Beside VCI, enter in a value (please consult your ISP for your VCI.
Factory default is 35).
6. Beside Bridge, use the drop down menu and select Disabled.
7. Beside IGMP, use the drop down menu and select Disabled to accept
multicast.
Altri manuali per SSABR-B
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Pacific Star Router di rete
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza