Pacific Sun CalcFeeder PRO Manuale dell'operatore
CalcFeeder PRO
Controller for Calcium reactor
with step motor feeding pump
User Quick Manual
ver. 1.0a
www.Pacific-Sun.eu
Page 2
CalcFeeder PRO Controller
Preface
Congratulations on your purchase!
CalcFeeder PRO Controllers are made with the highest quality materials, and made to
last!
The Pacific Sun Research and Development team are continually testing, developing and
releasing new features, and hence the purpose of this document is to touch on the basics
of our product and software.
Details about new features will be updated from time to time, but if you have any questions,
please contact us at:
service@pacific-sun.eu
Pacific Sun Team
Page 3
CalcFeeder PRO Controller
1. Decreasing flow effluent button.
2. Increasing flow effluent button.
3. Dosing pump “pause” button.
4. Settings menu button.
5. Optical sensor status indicator.
6. Solenoid valve status indicator.
7. Current controller working mode indicator.
1. Reset controller button.
2. ON/OFF automatic degassing button.
3. Automatic degassing settings menu button.
4. ON/OFF automatic alarm CO2 tank button.
5. ON/OFF standalone working mode button (when
turn ON pump is running without connected optical
sensor).
6. Reactor water refills manual mode enable button.
1. Manual enable degassing button.
2. Degassing setting once per week.
3. Degassing setting twice per week.
4. Degassing setting every day.
5. Degass Menu Exit button.
CalcFeeder PRO controller
Controller unit was designed to work with CalcFeeder PRO calcium reactor but it can be
used also as very precise feeding pump for each other brand Calcium reactor(require tur-
ning on Standalone mode to ON)
Include ultra-precise step motor pump with 4 rollers. Builtin LCD touch screen allow for very
easy flow adjustment. Firmware updates can be done by internal USB port.
Step motor allow for heavy duty work 24/7 without any limits. Please remember about re-
gular tubing inspections - used Pharmed BPT tubings have average 1000h lifetime and
need to be replaced after this time. Regular lubrications by grease extend tubing lifetime
and protect device against damage.
Page 4
CalcFeeder PRO Controller
Manual degassing screen - the work cycles are co-
unted in the upper left corner. The degassing process
takes 200 cycles.
Reactor manual water refills screen. In or-
der to turn off the refilling, press and hold the
„Turn off refill mode” button for 3 seconds.
If you need technical support - please contact with service@pacific-sun.eu!
Copyright
Pacific Sun Sp. Z o.o.
I Brygady Pancernej WP 10
84-200 Wejherowo
Poland
tel. + 48 58 778 17 17
email: office@pacific-sun.eu
Altri manuali per CalcFeeder PRO
3
Indice
Altri manuali Pacific Sun Controllori
