PadBot P2 Manuale utente
PadBot User Manual
PadBot P2
01
PadBot
Size
26.6*37.2*110cm
Screen Size 10 inches
Resolution HD1280*800
N.W. 6.5Kg
Battery Capacity 5000 mAh
Charging Input 12.6V/1.5A
Charging Interface 5.5*2.1
Charging Time 6Hours
Running Time 10 Hours
Standby Time 40 Hours
Charger X1 Charging Base X1
2. Accessories
Collision Prevention
& Anti Falling System
10’’ HD Screen
Battery Indicator
PadBot P2
NOTE: Long press Main Switch to start robot.
1. P2 Part Identifications
Foldable Body
Body Fixer
Main Switch
Sim Card Supported
USB Charging Port
Auto Charging System
DC Charging Port
Collision Prevention & Anti Falling System
PadBot P2
PadBot P2
02
PadBot
3. PadBot P2 InstallationBody Installation
1) Screw Body Fixer up to fix robot body, and follow correct direction to connect Body line with Base port.
2) Use screw key to fix M6 screw, and cover it with offered black plastic part.
Black bulge is
marked in red
Notch
PadBot P2
03
PadBot
4. PadBot P2 Tablet Installation, Connect Tablet with Body properly, and use M4 screw to fix Tablet.
5. How to StartLong press Main Switch until screen start.
6. Should connect with Internet, supporting WiFi & 4G:
WiFi: recommending bandwidth 8Mbps.
4G:Tablet supports Sim Card,Micro Sim Card Supported
Charging
04
PadBot
3.2 Way two: Connect charger into the port of Charging Base, use Charging Base to charge robot. After turn on “ auto
charge” function in App, robot will find Charging Base automatically if short of battery, and charge itself. After finish
charging, it will leave Charging Base automatically.
P2
PadBot P2 Charging
1. Robot equips with lithium battery, please charge robot fully in the first time to guarantee normal operation.
2. During charging, the charger’s light is red, when charge fully, the light turns green. And charger still shows green if connects no robot.
3. Two ways to charge robot:
3.1 Way one: Charging by DC charging port.
05
PadBot
Scan QR Code
Robot Side User Side
Robot Side (PadBot Telepresence Robot)
How to Use
Start robot after fixing Tablet, and open PadBot Telepresence Robot App; download PadBot Telepresence Admin
App as the User side.
1. Open the App
2. Check the QR Code
User Side (PadBot Telepresence Admin)
1. Download the App
2. Register
3. Scan the QR Code
to add robot
4. Manage robot
P2
06
PadBot
PadBot Telepresence Robot App--Main Interface
Click the App, enter into Main Interface. There shows the serial number and QR Code of robot, scan QR Code
with PadBot Telepresence Admin App firstly, to be the robot’s administrator.
Main Interface
P2
07
PadBot
In Main Interface, slide to left to switch to Robot Info page. There are the basic information of robot like: Icon,
nickname, serial number and current status, etc.
Robot Info Page
PadBot Telepresence Robot App--Robot Info
P2
08
PadBot
PadBot Telepresence Robot App--Robot Settings
1.In Robot Info page, click edit button to enter into Settings page.
2.Robot speed: there are 4 speed levels available, the higher level, the quicker speed.
3.Auto Charge: open auto charge function. When robot battery lower than 10%, robot will find nearby Charging
Base to charge itself automatically. Please close this function if no Charging Base available.
4.Collision Prevention: after open this function, robot will detect obstacles automatically during moving, and if
there are obstacles, robot will show obstacles’ place and stop.
Robot Info Page Robot Settings Page
P2
How to download App
lMode 11. iOS: Search “PadBot Telepresence Admin” in App Store
2. Android :Search “PadBot Telepresence Admin” in Google Play.
lMode 2Enter below link to download:
http://s.padbot.cn:9080/cloud/updatemgr/appDownloadLink.action?app=p
lMode 3Scan below QR Code to download
09
PadBot
Ways to download PadBot Telepresence Admin App in iOS or Android device:
P2
Indice
Altri manuali PadBot Robotica
