PAG 6001 Manuale utente
MPL USB-C Adaptor
Model 6001
Safety Instructions
This leaflet contains important safety and
operating instructions. Please read these fully
and note all warnings before using the PAG
MPL USB-C Adaptor.
Retain this leaflet for future reference.
The MPL USB-C Adaptor is intended only for
powering suitable devices, within its specified
range, via the D-Tap outputs of Mini PAGlink
batteries (see ‘Specification’).
IMPORTANT: Use only with the specified
batteries (see ‘Specification’). Do not connect
to other power sources.
Do not attempt to disassemble the MPL USB-C
Adaptor. There are no user-serviceable parts
inside, and incorrect reassembly may result in a
safety hazard.
Do not use the MPL USB-C Adaptor if it has
been damaged in any way. In this event you
should seek advice from PAG Ltd. by
Specification
Input Connection:
Input voltage: 12-24V. To be powered only
using the D-Tap output of Mini PAGlink
batteries.
USB-C Output (PD Fast-Charge):
63W. 5V-3A, 9V-3A, 12V-3A, 15V-3A,
20V-3.25A. Device selected.
USB-A Output (QC3.0):
20W. 5V-3A, 9V-2A, 12V-1.5A. Device selected.
Protection:
The PAG MPL USB-C Adaptor is reverse
voltage protected.
Suitable batteries:
Model 8141 MPL50 V-Mount
Model 8241 MPL99 V-Mount
Model 7141 MPL50 Gold Mount
Model 7241 MPL99 Gold Mount
Overall Dimensions (L x W x D):
75mm x 45mm x 33mm
(2.9" x 1.8" x 1.3" approx.)
Weight: 50g (1.7oz.).
Operating Instructions
The MPL USB-C Adaptor is designed to be
connected to the rear D-Tap output and the
rear left 1/4” bush on the top of the MPL99
battery. It is a push fit into the D-Tap output.
Tighten the captive-screw to secure the
position of the adaptor.
NOTE: When powering the adaptor using a
single MPL50 V-Mount battery, the adaptor will
protrude from the front of the battery, and it will
not be possible to link another battery to the
battery’s front, without first removing the
adaptor.
Connect the device you wish to power to the
adaptor’s USB-C or USB-A output, using the
appropriate cable.
ISSUED SEP 2022
PAG Ltd.
565 Kingston Road
London SW20 8SA
T+44 (0) 20 8543 3131
www.paguk.com
Switch-on the adaptor to deliver power. The
device you connect determines the voltage
delivered (see ‘Specification’). When not in
use, switch-off the adaptor to avoid drawing
power from the battery.
Servicing and Repairs
IMPORTANT: Refer all servicing or repairs to
qualified servicing personnel. The PAG MPL
USB-C Adaptor contains electronics that do
not require periodic maintenance, and
consequently there are no user-serviceable
parts inside.
Unqualified personnel should not open the
MPL USB-C Adaptor since this will invalidate
the guarantee.
Seek advice from PAG Ltd. by contacting
Altri manuali PAG Adattatore
