Pakite PAT-220 Istruzioni per il montaggio

FCC STATEMENT

§15.19 Labelling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

§15.21 Information to user.

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

§15.105 Information to the user.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

*RF warning for Mobile device:

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with

minimum distance 20cm between the radiator & your body.

The copyright of this manual belongs to the manufacturer.

Esteemed Customers:

Thank you for purchasing our product!

You will enjoy the fun brought by Wireless Audio Video Transmitter

along with all the global users who firmly support us. Please do read this

guide book carefully and thoroughly for better use of this product. It

works for home use. Every check of this product (if it works normally)

before uses it is necessary. If there any default or damage of this product,

please maintain or repair it in time.

This final explanation of the content written in this manual book belongs

to its manufacturer. Anyone or any party is not allowed to copy all or

partial content of this Manual Book. It is not authorized to anyone or

any party. No notifications would be given, if any change of this Manual

Book.

Thanks for buying our products along with the global users. “The Digital Wireless STB

Sharing device” is a kind of electronic product, which can realize the audio video

signal sharing in different rooms for family entertainment. It consists of a transmitter

and a receiver. Adopting advanced 2.4GHz wireless transmission schemes and

having advantages of long distance transmission, strong anti-interference and high

mobility. By means of radio waves, it can transmit the signal from DVD player, DVR,

CCTV camera, IPTV, Satellite receiver, Digital TV Set Top Box or any other AV

devices at transmitter end to TV sets in different room at receiver end. it can support

the IR remote control at the receiver end to realize the function of wireless control of

devices from another place. So that you can enjoy freely wireless HD AV sharing data

and Hi-Fi audio and video effect.

1. Function & Features

Use 2.4GHz ISM frequency band, multiple selective channels supported for

anti-interference from wireless.

Support 1 group of AV signal input/output.

Keep Transmitter and receiver setting at the same channel, it can support 1

transmitter and more receivers at the same time.

Support DVD, DVR, IPTV, CCTV Camera, Satellite receiver, Digital STB and

other AV output devices.

Support superheterodyne 433MHz infrared remote signal transmission, while

Compatible for 38KHz infrared carrier control signal.

Transmitter have built-in infrared signal emission or infrared transmission

extension cable, so that you can do remote control the signal from DVD, DVR,

STB, IPTV, and other device.

Supports video transmission of PAL/NTSC system and stereo audio transmission,

Pictures received are clear, flamboyant and stable.

Full hardware design without installing any software, plug and play, simple and

convenient. Fashionable design, Machine dimensions: 10×8.5×3.0 cm.

■

2. Standard accessories

Transmitter ………………………………………………………………………………

Receiver …………………………………………………………………………………

Power Adapter ……………………………………………………………………………

RCA Wire …………………………………………………………………………………

IR Extender Wire ………………………………………………………………………..

Use Manual………………………………………………………………………………

3. Specifications

Power input: DC 5V 1000mA

Video input: 1Vp-p(PAL/NTSC)

Audio input: 1.5Vp-p (dual channel)

Video output: 1Vp-p(PAL/NTSC)

Audio output: 1.5Vp-p (dual channel)

1. Allocation

1 set

2 pcs

1 pcs

1 copy

2. Transmitter panel description

3. Receiver panel description

4. Transmitter installation

■Put the transmitter near to STB and other AV output devices, connect the AV

cable with the audio video output signal of STB corresponding to colors(Red,

White, Yellow).

■Put the transmitter above the STB or other device so that the IR transmitting

window extrudes out by 1 to 2 cm and vertically aims at the receiving window of

the IR signal of the STB or other device.

Hints：

The receiving window of the IR signal of the STB or other device is generally

marked with “IR”. Please vertically aim at the IR signal transmitting window of

the transmitter. And keep the transmitter away from other devices and metal

devices to avoid effecting wireless signal transmitter.

5.Receiver installation

Put the transmitter near to STB and other AV output devices, connect the AV cable

with the audio video input signal of TV corresponding to colors(Red, White, Yellow),

and modulate the TV channels to video channel until it shows receiving pictures.

Hints：

After receiver connects the TV sets, you should change from TV to AV channels and

keep the transmitter away from other devices and metal devices to avoid effecting

wireless signal transmitter.

6. Allocation of 433MHz antenna

Please pay attention to the allocation of the 433MHz antenna. Make sure there is

no obstacle around the 433MHz antenna, especially metal obstacles which may

seriously impact wireless retransmission of IR signals.

Hints:

When arranging the transmitter and receiver, make sure there is no obstacle around

the 2.4G/2.4G antenna and the 433MHz antenna. Otherwise transmission of the

signal will be affected.

3. 433MHz Wireless IR Remote Extender

2.4G/2.4G Digital STB wireless sharing device needs no remote controller. If the STB

or other device is equipped with a remote controller, you can use it to remotely control

the receiver end to realize the function of wireless remote control from another place.

Transmitting RF：

1. Transmission frequency: 433.92MHz±200KHz Superheterodyne

2. Carrier frequency: 38KHz

3. IR signal Receiving: ≤10m

Receiving RF：

1. Transmission frequency: 433.92MHz±500KHz Superheterodyne

2. Carrier frequency: 38KHz

3. IR signal Transmitting:≤5m

1. Power switch

Pressing the power switch can switch on or off the power to the transmitter or

receiver and enable it to transmit or not transmit the signal.

Hints:

To ensure that the product can be used normally, the product should be connected when

power off In case the product be damaged. Switch on when finish connection and never

plug in or out at will. Please turn off the product if long time not use it.

2. 2.4GHz channel selection

Press the Channel switches can be free to choose 2.4GHz transmission channel.

AV signal can be transmitted normally only when the transmitter and the receiver are on

the same channel.

■2.4GHz /2.4GHz transmission channel(turn the switch down)：

Hints:

Please select the 2.4GHz transmission channel with the best image and sound effect

according to the actual operation environment. If there is interference from the router

signal in the environment, please select another 2.4GHz transmission channel to avoid

the interference source.

Hints:

If the Wireless IR Remote Extender is not sensitive, you can adjust the relative

locations of the transmitter and the receiver. Keep them away from the AV connection

wires or other metal objects to ensure barrier-free signal transmission.

1. If the indicator lamps do not light up and there is no image.

A. Please check the power connection of the transmitter and receiver, open the

power switch.

B. Please try to change the 2.4GHz transmission channel for the transmitter and the

receiver.

C. Please check if the transmitter and the receiver are connected correctly (Refer to

installation instruction).

2. IR remote controller fails to work.

A. Adjust the location of the transmitter and the receiver.

B. Plug out the transmitter and the receiver and restart 1~2 minutes later.

C. Please check whether the transmitter bulge 1-2 cm out of the STB or not.

3. The image is interfered.

A. Please adjust the angle of the antenna for 2.4GHz transmitter and the

receiver.

B. Please try to change the 2.4GHz transmission channel for the

transmitter and the receiver.

C. If allowed, please put the transmitter and the receiver in a higher place to

strengthen the wireless transmission.

Switch on only after finishing the connection and never plug in or out at will. The

product is for home use instead of professional industrial use. Please don’t take

apart without proper professional knowledge.

1. Warranty is only available to customers who buy this product

through legal approach.

2. After-sales promise：

Every customer designated dealers to buy products in our company, if there is

product quality problems under the normal use within 3 months from the day you

buy the machine, user can bring the valid credentials or sales invoice to the

original dealer where you bought it to replace the same model of the products.

If there are product quality problems within 12 months, you can request free

warranty (not including common accessories).

3. Additional fee will be charged in any of the following situations:

A. The warranty period is expired.

B. Failure or damage caused by connecting other device.

C. Failure or damage caused by repairing or transforming by yourself.

D. Failure or damage caused by not following the operation instructions of the

product.

E. Failure or damage caused by collision, falling or other non-quality problems.

F. Damage cause d by fi re, lightning stri ke or other unexpected disasters.

For repairing products which are damaged by the above situations, users should

bear the fee of replacement of the damaged components as well as the shipping fee.

Solemn Statement:

The manufacturer assumes no liability for irreversible damage or damages to other

devices caused by these situations.

Dear user:

Thank you for buying this device. In order to ensure that you can fully enjoy our perfect

after-sale service of our company, please carefully read the comments of this product

service card.

Comments:

1. Please reserve this card carefully. If you lose it, you can not get another copy.

2. Please show this card together with your purchase receipt when applying for

warranty service.

3. This card is invalid without the seal of the distributor.

Indice

Altri manuali pakite Estensione

pakite

pakite PAT-580 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente

pakite PAT-220 Istruzioni per il montaggio

Manuali Estensione popolari di altre marche