Panasonic DP-C406 Manuale utente

Operating Instructions

Before operating this machine, please carefully read this manual

and keep this documentation in a safe place for future reference.

(Illustration shows optional accessories that may not be installed on your machine.) English

Digital Colour Imaging Systems

(For Maintenance)

Model No. DP-C406 / C306 / C266

Table of Contents

Chapter 1 Problem Solving

Troubleshooting.................................................................................................................3

User (U) / Jam (J) / Machine (E) Error Codes ................................................................... 6

User Error Codes (U Codes) / Machine Error Codes (E Codes)................................... 6

Jam Error Codes (J Codes) .......................................................................................... 8

Removing Misfed Paper .................................................................................................. 10

Paper Feed Section (Paper Tray 1) ............................................................................ 10

ADU Section................................................................................................................ 12

Fuser/Exit Section ....................................................................................................... 13

Paper Transport Section ............................................................................................. 15

Paper Feed Section (Paper Tray 2) ............................................................................ 16

Paper Feed Section (Optional Paper Tray 3 or 4)....................................................... 17

1Bin Finisher Section .................................................................................................. 18

1Bin Saddle-Stitch Finisher Section............................................................................ 19

ADF Section ................................................................................................................ 21

Chapter 2 Replacing Consumables

Adding Paper <Printing Media>....................................................................................... 23

Paper Tray .................................................................................................................. 23

Sheet Bypass .............................................................................................................. 24

Replacing Toner Cartridge .............................................................................................. 26

Replacing the OPC Drum Unit......................................................................................... 28

Replacing Toner Waste Container / Cleaning the LSU Aperture Glass .......................... 31

Replacing Staples (FQ-SS32) ......................................................................................... 34

Replacing Staples (DQ-SS35)......................................................................................... 36

Disposal of the Punch Hole Residue............................................................................... 39

Replacing the Battery ...................................................................................................... 40

Chapter 1 Problem Solving

1Problem Solving

Troubleshooting

Unit Does Not Operate

Light Copies

zIf the measures outlined above do not solve the problem, call the authorised Panasonic dealer.

Check Action

Is the display dark?

Check if the Power Switches (Main Power Switch on the

rear and Power Switch on the left side of the machine) are

turned ON and if the power cord is plugged into the AC

outlet.

Does the Energy Saver key flash (or light), and is the

display turned OFF? Press the Energy Saver key on the Control Panel.

Do any of the U## code and messages appear on the

display?

(U1, U4, U6, U7, U11....etc.)

Perform operations in accordance with each message.

(See page 6)

Do the Add Staples Indicator and message appear on

the display?

Add staples. (See page 34 or 38)

Remove all jammed staples. (See page 34 and 36)

Do the Add Paper Indicator and message appear on

the display? ( ) Add papers. (See page 23)

Do the Paper Misfeed Indicator and message appear

on the display? (J##) Remove the misfed paper. (See pages 10 to 21)

Does the error message “Remove paper from inner

tray” appear on the display?

Remove the paper from inner tray.

(For the capacity of Inner Tray, refer to Specifications in

the Operating Instructions (For Basic Operations) of

provided booklet.)

Do E#-## Indicator and message appear on the

display?

Turn OFF the Power Switch on the left side and the Main

Power Switch on the rear of the machine, and then turn

them back ON. If the error code has not been cleared, call

the authorised Panasonic dealer.

The machine does not accept the next job during

operation, instructed job would not be accepted for a

long time period, or job would not be completed.

Turn OFF the Power Switch on the left side and the Main

Power Switch on the rear of the machine, and then turn

them back ON. If the machine still does not accept the next

job, call the authorised Panasonic dealer.

Check Action

Is the Density level set to the “Lighter” side? Select “Darker”.

Do the Add Toner Indicator and message appear on

the display? ( )

Replace the Toner Cartridge.

(See page 26)

Chapter 1 Problem Solving

Marked Copies

zIf the measures outlined above do not solve the problem, call the authorised Panasonic dealer.

Machine Care

Check Action

Is the White Reference Sheet, Platen Sheet, Scanning

Glass (Small), or Platen Glass (Large) dirty?

Clean the White Reference Sheet, Platen Sheet, Scanning

Glass (Small), or Platen Glass (Large). (Refer to Machine

Care below.)

Are there any streaks on the copy image?

1.Clean the LSU Aperture Glass. (See page 32)

2.Clean the White Reference Sheet and the Scanning

Glass (Small). (Refer to Machine Care below.)

White Reference Sheet

Scanning Glass (Small)

Platen Sheet

Platen Glass (Large)

White Reference Sheet, Platen Sheet,

Scanning Glass (Small), or Platen Glass

(Large)

1.Wipe off any marks or dirt with a cloth and a

neutral detergent.

2.Wipe again with a dry cloth.

Chapter 1 Problem Solving

Displaying Status

Normally, “Status” is displayed in grey on each function screen.

“Status” is displayed in yellow if the Paper Tray is empty or toner becomes low.

Select “Status” displayed in yellow to confirm the status details.

Select “Status” in yellow.

(Ex: Copy function screen)

Check the status, and then select

“Close”.

(Ex: Paper Empty)

1Select “Paper Empty”.

2Check the empty Paper Tray, and then

select “Close”.

3Select “Close”.

Chapter 1 Problem Solving

User (U) / Jam (J) / Machine (E) Error Codes

User Error Codes (U Codes) / Machine Error Codes (E Codes)

Outer

Inner

User Error (Locations)

zWhen a user error occurs, the location and the procedures for handling the user error are displayed frame by

frame on the Touch Panel Display. Check the location and handle the user error according to the displayed

pictures and this manual. (See pages 26 to 31)

ADF Cover ADF (Automatic Document Feeder)

Section

Right Side Cover

Feed Cover 1

ADU Cover

Feed Cover 2

Option Feed Cover

Finisher Top Cover (Option)

Transport Cover (Option)

Battery Holder

Front Cover

Toner Cartridges

(Yellow/Magenta/Cyan/Black)

Toner Waste Container

OPC Drum Units

(Yellow/Magenta/Cyan/Black)

Mechanical Counter

Error Location Indicator

zMachine will stop. Replace the

Toner Waste Container.

zSelect “Close” to continue the

current job temporarily.

Ex: Front Cover is opened. Ex: Toner Waste Container is almost full. Ex: Toner Waste Container is full.

Chapter 1 Problem Solving

E Codes

Call the authorised Panasonic dealer when machine Error Code (E Code) appears on the Touch Panel

Display.

Code Check Points

U1 Front Cover is open.

U4 Finisher is pulled out.

U6 ADU Cover, Feed Cover 1, and/or Right Side Cover is open.

U7 Feed Cover 2 & Option Feed Cover are open.

U8 Transport Cover is open. (When optional Paper Transport Unit is installed)

U11 Paper remains in the Finisher Bin. (When optional Finisher is installed)

U12 Finisher Top Cover and/or Staple Cover is open. (When optional Finisher is installed)

U13*1 Toner level is low, or has run out. (See pages 26 to 27)

U14*2 Toner Waste Container is full. (See pages 31 to 33)

U15 Toner Waste Container is not installed. (See pages 31 to 33)

U20 ADF Cover is open.

U21 ADF is open while scanning from ADF.

U25 Toner is hardened. Shake Toner Cartridge well. (See pages 26 to 27)

U28 OPC Drum Unit is not installed. (See pages 28 to 30)

U29 OPC Drum Unit requires replacement. (See pages 28 to 30)

*1: When the Maintenance and Toner/Toner Waste Container Indicators are blinking

The machine will complete the current job and stop operating. To continue using the machine temporarily while

waiting for a replacement toner/container, press any key. (Ex: For Toner Waste Container, approximately 400

additional copies can be made.)

*2: When the Maintenance and Toner/Toner Waste Container Indicators light up

The machine stops and will not allow further operation until the Toner Waste Container is replaced.

Chapter 1 Problem Solving

Jam Error Codes (J Codes)

zThe display indicates the section of the misfed paper.

Remove the misfed paper and check to see if the Misfeed Indicator has been cleared.

If other locations indicate presence of paper, remove them and check the display again.

zWhen clearing a misfed paper that is difficult, or impossible to see, turn OFF the machine and contact the

authorised Panasonic dealer.

Removing a Misfed Paper (Locations)

zWhen a misfed paper occurs, the location and the procedures for removing misfed paper are displayed frame

by frame on the Touch Panel Display.

Check the location and remove all misfed papers according to displayed pictures and this manual. (See pages

26 to 31)

Finisher Section (Option) ADF (Automatic Document Feeder)

Section

Fuser/Exit Section

Paper Feed Section

(Paper Tray 1-4 & Sheet Bypass)

ADU Section

Paper Feed Section

(Paper Tray 2)

Paper Feed Section

(Paper Tray 3, 4)

(Option)

Paper Transport Section

(Option)

Paper Tray 1

Sheet Bypass

Paper Tray 2

Paper Tray 3

Paper Tray 4

Misfed Location Indicator

Ex: ADU Section

Returns to the 1st step.

Chapter 1 Problem Solving

Code Check Points

J00 Sheet Bypass (Remove the misfed paper and load the paper again.)

J01 Paper Tray 1 & Paper Feed Section (Paper Tray 1-4 & Sheet Bypass) (See page 10)

J02 Paper Tray 2 & Paper Feed Section (Paper Tray 2) (See page 16)

J03 Paper Tray 3 & Paper Feed Section (Paper Tray 2-4) (See pages 16 to 17)

J04 Paper Tray 4 & Paper Feed Section (Paper Tray 3, 4) (See page 17)

J06, J26 Paper Feed Section (Paper Tray 1-4 & Sheet Bypass) (See pages 10, 16, and 17)

J07, J08,

J09, J27,

J28

Paper Feed Section (Paper Tray 2 & Optional Paper Tray 3 & 4) (See pages 16 to 17)

J16, J18,

J33-J35

Paper Feed Section (Paper Tray 1-4 & Sheet Bypass)

Verify that the media type selection in the Control Panel matches the media loaded on the Trays.

Ex: Select “Transparency” when Transparencies are loaded in the Sheet Bypass. (See pages 10, 16,

and 17)

J19 Paper Feed Section & ADU Section (See pages 10, 12, 16, and 17)

J82, J83,

J88

ADU Section & Fuser/Exit Section (See pages 12 to 13)

J30-J32,

J38-J40,

J42-J45

Paper Feed Section & Fuser/Exit Section (See pages 10, 13, 16, and 17)

J41, J50,

J51, J52,

J86

Fuser/Exit Section & Paper Transport Section (See pages 13 to 15)

J80, J81,

J87

Fuser/Exit Section (See page 13)

J54-J56 Paper Transport Section (See page 15)

J60-J66 Optional Finisher Section (See pages 18 to 19)

J70-J79,

J92-J94

ADF Section (See pages 21 to 22)

Chapter 1 Problem Solving

Removing Misfed Paper

Paper Feed Section (Paper Tray 1)

zDo not touch the belt and the STR for optimum copy quality and performance of the machine.

STRBelt

Open the Feed Cover 1.

Remove the misfed paper.

Pull out the Paper Tray 1.

Remove the misfed paper.

Feed Cover 1

Misfed Pa

Misfed Paper

Altri manuali per DP-C406

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Panasonic Stampante tutto in uno

Panasonic

Panasonic Workio DP-3510 Come usare

Panasonic

Panasonic DP-MB340 Manuale utente

Panasonic

Panasonic KX-MC6020HX KX-FAP317E Manuale utente

Panasonic

Panasonic KX-MB2000 Manuale utente

Panasonic

Panasonic WORKIO DP-C354 Manuale utente

Panasonic

Panasonic DP-MB350 Manuale utente

Panasonic

Panasonic KXFLB881 - Network Multifunction Laser... Manuale utente

Panasonic

Panasonic Workio DP-1820P Manuale utente

Panasonic

Panasonic KX-MB2011GX Manuale utente

Panasonic

Panasonic DP-MB500 series Manuale utente

Panasonic

Panasonic DP-8020E Manuale utente

Panasonic

Panasonic Panafax UF-7000 Manuale di istruzioni

Panasonic

Panasonic KX-MB781C Manuale utente

Panasonic

Panasonic KX-MB1500HX Manuale utente

Panasonic

Panasonic WORKIO DP-8035 Manuale utente

Panasonic

Panasonic DP-190 Manuale utente

Panasonic

Panasonic FP-D455 Manuale utente

Panasonic

Panasonic KX-FLM650 Manuale utente

Panasonic

Panasonic WORKIO DP-150 Manuale utente

Panasonic

Panasonic WORKIO DP-C354 Manuale utente

Panasonic

Panasonic KX-MB263HX Manuale utente

Panasonic

Panasonic DP-MC210 Manuale utente

Panasonic

Panasonic KXFLB881 - Network Multifunction Laser... Manuale di istruzioni

Panasonic

Panasonic KX-MB778TW Manuale utente

Manuali Stampante tutto in uno popolari di altre marche

Triumph Adler

Triumph Adler DC 2016 Manuale

Epson

Epson WorkForce WF-2510 Guida utente

Epson

Epson Stylus Scan 2000 Manuale di installazione e funzionamento

Epson

Epson PictureMate Snap PM 240 Manuale di istruzioni

Konica Minolta

Konica Minolta bizhub C35 Manuale utente

Brother

Brother MFC-J430w Manuale utente

Konica Minolta

Konica Minolta BIZHUB 558 Manuale utente

Lexmark

Lexmark MX710 Series Manuale

Brother

Brother MFC-9760 Manuale utente

Lexmark

Lexmark XC8155 Manuale utente

Lexmark

Lexmark X642E Manuale utente

Sharp

Sharp MX-2310U Guida

Aficio

Aficio 200 Manuale utente

Canon

Canon ImageCLASS 2300 Manuale

Ricoh

Ricoh Pro C900 Manuale utente

Lexmark

Lexmark X925 Manuale utente

Brother

Brother Business Smart MFC-J4510dw Manuale utente

Epson

Epson Stylus CX8400 Series Manuale utente