Panasonic WORKIO DP-130 Manuale utente
Digital Copier
Model No.
DP-130/135/150
Operating Instructions
Before operating this copier, please read
these instructions completely and keep this
operating instructions for future reference.
Making CopiesMaintenanceChecking Before OperatingOthers
2
2
INVOICE
LETTER R
LEGAL
INV
LTR
LGL
INV LTR LGL
PHOTO
AUTO
DARK
LIGHT
2SIDED
10 1
ZOOM
(50~200%)
START
CLEAR/STOP
PHOTO
AUTO
SAVER
ENERGY
DARK
LIGHT
LEGAL
79%
INVOICE
LETTER
LETTER
129%
LETTER
65%
INVOICE
LEGAL
61%
INVOICE
100%
Common Features
■■
■■
■Full Size Copying
Turn the Power
Switch On Load the paper
(See page 18)
Control Panel
1
Position
original 2
Select“100%” 3
Number of
copies
(Up to 99)
NOTE
4
Press START
■■
■■
■Position of the original
■■
■■
■Original Guide
Place original against guide.
CFace DOWN on platen.
CIf the original is not positioned properly, a portion of the
original may not be copied.
■■
■■
■When manually selecting exposure control
CThe copier has auto exposure control and adjustments
are rarely required.
Select Photo to copy photos and halftones.
Select Auto to copy with Auto exposure control.
Select Dark to copy light image originals.
Select Light to copy colored background originals.
Normal Position
CRemove stacked copies from the exit tray every 200 sheets.
100%
3
Making Copies
Common Features ■Full Size Copying..................................................................................2
■Reduction or Enlargement Copying ....................................................15
■Zoom Copying ....................................................................................16
■Using the Sheet Bypass .....................................................................17
Maintenance
Handling ■Adding Paper ......................................................................................18
■Changing Paper Size..........................................................................19
■ChangingToner Cartridge...................................................................20
■Changing Drum Unit ...........................................................................21
■Removing a Paper Misfeed.................................................................22
Mode Functions ........................................................................................................................... 14
Checking
Others
Troubleshooting ........................................................................................................................... 24
Specifications/Consumables List ............................................................................................... 27
Table of Contents
Setup Procedure ■Before setting up ................................................................................10
■Release Scanner/Remove shipping materials ....................................11
■InstallToner Cartridge.........................................................................12
■Install paper........................................................................................13
Table of Contents
Before Operating
Precautions/Energy Star ............................................................................................................... 4
Components ■External/Internal ...................................................................................7
■Control Panel........................................................................................8
4
Precautions/Energy Star
For your safety
■■
■■
■Laser Safety
Caution
This product utilizes a laser.
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
■■
■■
■Caution Labels
Product complies with DHHS Rules 21
CFR Subchapter J in effect of date
of manufacture.
Utsunomiya, Tochigi, Japan
Product complies with DHHS Rules 21
CFR Subchapter J in effect of date
of manufacture.
Taytay, Rizal, Philippines
FFPTE2479
DANGER-Invisible laser
radiation when open and
interlock defeated.
AVOID DIRECT EXPOSURE
TO BEAM.
Label when manufactured in Japan.
Label when manufactured in Philippines.
The DP-130/135/150 copier complies withTier 2 of the Environmental Protection Agency’s Energy
Star Program.This voluntary program specifies certain energy consumption and usage standards
for copiers.This copier will automatically“power down”after a specified period of non-use.
The use of these Energy Star compliant copiers will reduce energy consumption and ultimately
benefit the environment.
The default functions can be adjusted depending on your office requirements.Please see your
authorized Panasonic copier dealer for more details.
5
Precautions/Energy Star
Precautions
Precautions
Handling
■Do not look directly at exposure lamp when copying.
■Do not turn the power switch off or open the front
panel during copying.(See page 7)
CDo not drop paper clips or other metal objects into
the copier.
Toner and Paper
■Store toner cartridge and paper in cool areas with
low humidity.
CHigh quality paper of 16 lbs.- 24 lbs.(15 – 34 lbs.
via sheet bypass) may be used.
CFor optimum performance, it is recommended that
only Panasonic Brand supplies be used in the
copier.
Ventilation
■The copier should be installed in a well-ventilated
area to minimize the ozone density in the air.
6
Installation
■The copier should not be installed in areas with the
followingconditions:
CExtremely high or low temperature and humidity.
Proper ambient conditions
Temperature: 50°F – 86°F
Relativehumidity: 30% – 80%
CWhere temperature and humidity can change
rapidly, causing condensation.
CDirect exposure to sunlight.
CDirectly in air conditioning flow.
CIn areas of high dust concentration.
CIn areas of poor ventilation.
CIn areas with chemical fume concentration.
CIn areas with extreme vibration.
CWith unstable or uneven conditions (floors, etc.).
■The power consumption is 1.0 kW.
A properly wired (with ground), dedicated, 15A, 120V AC outlet is required.Do not use an
extension cord.
The main plug on this equipment must be used to disconnect main power.Please ensure that the
socket outlet is installed near the equipment and shall be easily accessible.
For U.S.A.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his/her own expense.
Any unauthorized changes or modifications to this equipment would void the users authority to
operate this device.
Precautions
7
Components
Using the Sheet Bypass
Control Panel Platen
■■
■■
■External
External/Internal
Button
PaperTray
(See page 13, 18, 19)
ExitTray
Front Panel
Right Cover
On
Sheet Bypass
Off
Power Switch
Precautions
Components
Please push here when
closing Right Cover.
■■
■■
■Internal
Knob
(See page 23)
Drum Surface
CDo not touch it!
Drum Unit
(See page 21)
Toner Cartridge
(See page 12, 20)
Fuser Cover
(See page 22)
Transfer Roller
CDo not touch it!
8
2SIDED
PHOTO
AUTO
DARK
LIGHT
LEGAL
79%
INVOICE
LETTER
LETTER
129%
LETTER
65%
INVOICE
LEGAL
61%
INVOICE
100%
Components
Control Panel
Auto/Photo Mode Indicator
(See page 2) Auto/Photo Select Key
(See page 2)
Exposure Indicator
(L:Normal position)
(See page 2)
Exposure Control
Key
(See page 2) % Select Key
(See page 15)
PaperTray Key
Press to select
paper tray or
sheet bypass
By pressing Exposure Control key, the Exposure Indicator will be indicated as
follows.
DARK
LIGHT
Normal
Position Dark Darker Lighter Light
9
10 1
ZOOM
(50~200%)
START
CLEAR/STOP
SAVER
ENERGY
Components
Components
Copy Count Display
Indicates number of
copies and error code
etc. (See page 24)
Energy Saver Key (See page 14)
Clear/Stop Key
Press to stop copy run or clear
copy count in display.
Zoom Keys
(See page 16)
Quantity Keys
Start Key
Symbol Marks
#Change Drum Unit (See page 21)
$ChangeToner Cartridge (See page 20)
%Add Paper (See page 18)
&Paper Misfeed (See page 22, 23)
10
Copier Operating Instructions
(1 piece)
Toner Cartridge
(1 piece)
ATTENTION
■■
■■
■Unpack and install on a stable flat surface.
Note: Do not plug the copier until directed to do so.
Setup Procedure
Before Setting Up
CUse only the setup units/parts designated by Panasonic.If the copier should be
damaged by using other setup units/parts, Panasonic will not bear any responsibility.
CDrum unit already comes installed in copier.
■■
■■
■Set up the main unit with following procedure
#Remove all shipping tape and styrofoam.
$Release the scanner/Remove shipping materials (See page 11)
%Installation of theToner Cartridge (See page 12)
&Loading paper (See page 13)
(Install the copier in an area that means or exceeds the minimum space requirement
(see diagram below).
Copier Sheet BypassExitTray
30 cm 70 cm
10 cm
Altri manuali per WORKIO DP-130
2
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Panasonic Fotocopiatrice
Panasonic
Panasonic KX-FL612CX Manuale utente
Panasonic
Panasonic FP-7742 Manuale utente
Panasonic
Panasonic DP-2000 Manuale utente
Panasonic
Panasonic DP-1515P Manuale utente
Panasonic
Panasonic DP-135FP Manuale utente
Panasonic
Panasonic 3000 Manuale utente
Panasonic
Panasonic WORKIO DP-130 Manuale utente
Panasonic
Panasonic FP-7718 Manuale utente
Panasonic
Panasonic Workio DP-3510 Manuale
Panasonic
Panasonic FP-7742 Manuale utente
Panasonic
Panasonic DP-2000 Manuale utente
Panasonic
Panasonic DP-150FP Manuale utente
Panasonic
Panasonic Workio DP-C305 Manuale utente
Panasonic
Panasonic DP-130 Series Manuale
Panasonic
Panasonic DP-6000 Manuale utente
Panasonic
Panasonic FP-7713 Manuale utente
Panasonic
Panasonic FP-7715 Manuale utente
Panasonic
Panasonic DP-150FP Manuale utente
Panasonic
Panasonic WORKIO DP-3520 Manuale utente
Panasonic
Panasonic FP-7181 Manuale utente
