Panasonic EY47A1 Manuale utente

Unauthorized copying and distribution is a violation

of law.

ORDER NO. PTD2010E03CE

Cordless Reciprocating Saw

Model No. EY47A1

Europe

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 5

5 Exploded View and Replacement Parts List -----------10

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70 °F (30 - 40 °C) higher.

Please use a soldering iron with temperature control and adjust it to 750 ± 20 °F (400 ± 10 °C). In case of using high temperature

soldering iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600 °C).

2 Specifications

3 Troubleshooting Guide

3.1. Troubleshooting Guide

3.2. Trial Operation (after checking Troubleshooting Guide).

3.2.1. Assembly

• Confirm if there is no gap between housing L and R by pinching lead wires.

• Check the smooth movement of blade.

• Slide the handle lock release lever and verify that the handle angle can be switched among its four settings.

• Check if the shoe position can be adjusted by internal shoe adjustment screw.

• Check the smooth movement of switch lock release lever.

3.2.2. Operation

• Check if the motor rotation become higher as the amount of depression of switch handle and make sure that the LED turns on.

• Confirm if the rotation stops immediately when releasing the switch handle and make sure that the LED turns off.

• Confirm if the blade moves properly and there should be no metallic or abnormal sound and abnormal vibration.

3.2.3. Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.

• Check for the presence of any dirt or foreign matter from the repair process on the outside of the tool.

• There is no dust or deformation on battery terminals.

4 Disassembly and Assembly Instructions

* To reduce the risk of injury, always remove battery pack before removing/installing the tool.

* To assemble the tool, start with 4-7 and proceed to 4-1.

4.1. Removing the Housing Set.

1. Remove 14 torx screws that attach housings.

2. Remove back housings (R) and (L) from front housing set.

4.2. Precautions when attaching the Switch.

1. Attach the trigger release flat spring into the housing like the picture

and then insert the trigger lock.

2. Attach the trigger release flat spring to trigger lock.

3. Insert the Lock lever into the housing while pulling the trigger lock

down.

* Check to make sure that the trigger lock moves up and down smoothly

while hold the lock lever and the switch.

4.3. Removing the Module Assembly and Connectors.

4.4. Removing the Gear Box Block and Associated Parts.

4.5. Removing the Chuck.

Remove the module assembly from front housing and then remove the

switch’s 8-pin connector and LED’s 3-pin connector from the module

assembly’s control circuit board.

Remove the motor assembly, gear box block,

switch assembly and guard assembly from the

front/back housing.

Remove 2 torx screws.

4.6. Removing the Motor Assembly from the Gear Box Assembly.

4.7. Precautions when attaching the Motor Assembling into the Front Hous-

ing.

1. Remove two screws holding the motor using phillips screw driver.

2. Unscrew the two screws that secure the lead wires from the motor

assembly and remove them from the switch assembly.

4.8. Wiring and Assembly Points.

Model No. : EY47A1 Exploded View

5 Exploded View and Replacement Parts List

Altri manuali per EY47A1

Indice

Altri manuali Panasonic Sega a batteria

Panasonic

Panasonic EY3544 - CUTTER - POWER TOOLS Manuale utente

Panasonic

Panasonic EY45A1 Manuale utente

Panasonic

Panasonic EY3531 - 15.6V WOOD SAW Manuale utente

Panasonic

Panasonic EY47A1 Manuale utente

Panasonic

Panasonic EY3530 - CORDLESS METAL SAW Manuale utente

Panasonic

Panasonic EY45A1 Manuale utente

Panasonic

Panasonic EY3551 - 18V WOOD SAW Manuale utente

Panasonic

Panasonic EY45A1 Manuale utente

Panasonic

Panasonic EY3544 - CUTTER - POWER TOOLS Manuale utente

Panasonic

Panasonic 45A1LJ Manuale utente

Panasonic

Panasonic EY45A1 Manuale utente

Panasonic

Panasonic EY4542 - CIRCULAR SAW 14.4V Manuale utente

Manuali Sega a batteria popolari di altre marche

EDM Product

EDM Product 08754 Manuale utente

GreenWorks

GreenWorks GD24JS Manuale utente

AEG

AEG BKS18LI-401B Manuale utente

Black & Decker

Black & Decker BDEJS4C Manuale utente

DeWalt

DeWalt DC330 Manuale utente

Makita

Makita HS301D Manuale utente

Makita

Makita RS001GM101 Manuale utente

Metabo HPT

Metabo HPT C 3607DWA Manuale utente

Bosch

Bosch RS20 Istruzioni per il montaggio

Parkside

Parkside PAAS 12 A2 Manuale utente

Makita

Makita DHS783ZJU Manuale utente

Makita

Makita DJR188Z Manuale utente

Max

Max 61011 Manuale utente

Makita

Makita DJV181 Manuale utente

Makita

Makita DJR188 Manuale utente

EINHELL

EINHELL TE-AP 18 Li Manuale utente

Festool

Festool RSC 18 Manuale utente

Makita

Makita DJV182 Manuale utente