Panasonic AWE300SP - COLOR CAMERA Manuale utente

OPERATING INSTRUCTIONS

Before attempting to connect, operate or adjust this product, please

read these instructions completely.

1/3-inch Camera With Separate Head

Model AW- P

FOCUS

LOCK

indicates safety information.

CAUTION

RISK OF ELECTRIC SHOCK

O NOT OPEN

CAUT ON: TO REDUCE THE R SK OF ELECTR C SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERV CEABLE PARTS NS DE.

REFER TO SERV C NG TO QUAL F ED SERV CE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (service)

instructions in the literature accompanying the appliance.

WARNING:

TO RE UCE THE RISK OF FIRE OR SHOCK HAZAR , O NOT

EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION:

TO RE UCE THE RISK OF FIRE OR SHOCK HAZAR AN ANNOYING

INTERFERENCE, USE THE RECOMMEN E ACCESSORIES ONLY.

FCC Note:

This device complies with Part 15 of the FCC Rules. To assure continued

compliance follow the attached installation instructions and do not make any

unauthorized modifications.

This equipment has been tested and found to comply with the limits for a class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

Contents

Introduction. . . . . . . . . . . . . . . . . . . . . . . 4

Features. . . . . . . . . . . . . . . . . . . . . . . . . . 4

Special Notes on Operation. . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . 6

Parts and Their Functions . . . . . . . . . . . 7

$Main unit . . . . . . . . . . . . . . . . . . . . . . 7

$Camera head unit . . . . . . . . . . . . . . . 9

Installation. . . . . . . . . . . . . . . . . . . . . . . 10

$Attaching the lens . . . . . . . . . . . . . . 10

$nstallation on a camera stand

(tripod, etc.) . . . . . . . . . . . . . . . . . . . 10

System Configuration (Connections)

. . . 11

$Connecting equipment with a

composite video input connector. . . 11

$Connecting a remote control unit

(RCU) . . . . . . . . . . . . . . . . . . . . . . . 12

$Connecting a remote control box

(RCB) . . . . . . . . . . . . . . . . . . . . . . . 13

$Connecting multiple cameras

(achieving genlock) . . . . . . . . . . . . . 14

$Connections for exercising control

from a computer . . . . . . . . . . . . . . . 15

$Reference: Model numbers of related

equipment . . . . . . . . . . . . . . . . . . . . 16

Operating Mode Selection . . . . . . . . . . 17

How to select the operating mode

. . 18

Operating Procedures . . . . . . . . . . . . . 19

Adjustments . . . . . . . . . . . . . . . . . . . . . 20

$Flange back adjustment . . . . . . . . . 20

$White balance adjustment. . . . . . . . 21

$Black balance adjustment . . . . . . . . 23

$Black level (total pedestal)

adjustment. . . . . . . . . . . . . . . . . . . . 24

$Genlock adjustment. . . . . . . . . . . . . 25

Menu Item Settings and Changes . . . . 27

$Setting the menu items . . . . . . . . . . 27

Halogen light, fluorescent light and

outdoor mode sub-menu screens

. . . 29

$User mode sub-menu screens . . . . 35

Returning to Initial Settings. . . . . . . . . 42

$nitial settings (factory settings). . . . 43

Outline rawings . . . . . . . . . . . . . . . . . 45

$Main unit . . . . . . . . . . . . . . . . . . . . . 45

$Camera head unit . . . . . . . . . . . . . . 45

Specifications . . . . . . . . . . . . . . . . . . . . 46

$Accessories. . . . . . . . . . . . . . . . . . . 47

Introduction

OFeaturing digital video signal processing, this 1/3-inch 3-CCD system color camera with

its separate head achieves a high picture quality and high reliability as well as many and

varied functions despite its compact size and light weight.

OThe head is separate which means that it can easily be mounted on a microscope (C

mount), for instance.

OUsing a menu screen format, the camera’s shooting conditions and functions can easily

be set and changed.

OThe camera can be connected to a peripheral unit such as an RCB or RCU for

expanding the capabilities of the system to suit the intended applications.

OA wide range of applications can be supported by installing optional cards.

Features

High picture quality, high reliability, many and varied functions, a compact size and

light weight achieved by incorporating digital video signal processing

OResolution: 800 lines (high band DTL ON), S/N ratio: 62 dB (DNR ON)

OMinimum illumination: 1.5 lux (f/1.4 ‘night eye’ mode)

Many and varied functions despite compact size

OSetting of camera parameters using menu screens enabled

OAuto functions such as ATW, ELC and AGC incorporated

OCCD readout (field, frame) switching supported

The vertical resolution can be improved by switching to the frame mode, and this is

useful for capturing still images and other kinds of image processing.

OSynchro scan function provided to reduce horizontal line noise when computer screens

are shot

OFunctions for controlling camera by computer incorporated

OExtension of cable (standard length of 3 meters) between head unit and main unit up to

10 meters possible

Faithful image reproduction assured by many compensation circuits

OEven areas with dark colors reproduced clearly by chroma detail enhancement

ONatural detail enhancement enabled even for dark areas by dark detail circuit

ONatural dynamic range reproduced by digital highlight chroma

OFaithful reproduction of colors enabled by digital color matrix

Full spectrum of video productions supported

OConditions optimally suited to each application selectable from 4 operation modes

(halogen light mode, fluorescent light mode, outdoor mode and user mode)

OSMPTE color bar display provided

ORemote control enabled by RCU or RCB

Special Notes on Operation

OTurn the power off before connecting or disconnecting cables.

OConnection or disconnection of any studio cable, RCB cable or other cable to any unit of

equipment must be performed while power is off.

While the camera is in automatic mode:

OShooting of bright objects in ELC operation mode may result in a smeared picture

unique to the CCD.

OThe ATW function under fluorescent illumination can adversely change the white

balance.

Precautions

ODo not attempt to disassemble the camera, Remote Control Unit (RCU) or other units.

n order to prevent electric shock, do not remove screws or covers. There are no user-

serviceable parts inside.

ODo not mishandle the camera. Avoid striking, shaking, etc. The camera contains

precision components which could be damaged by improper handling or storage.

ODo not let the lens remain uncovered when the camera is not in use. f the lens is not

installed, do not leave the lens mount hole uncovered.

ODo not touch the surface of the lens or prism.

ODo not use strong or abrasive detergents when cleaning the camera body.

ODo not aim the camera toward the sun, irrespective of whether it is turned on or not.

ODo not expose the camera or Remote Control Unit (RCU) to rain or moisture, and do not

try to operate the equipment in wet conditions. Do not operate the camera or RCU if it is

wet.

ODo not operate the camera or Remote Control Unit (RCU) outdoors during a thunder

storm.

ODo not use the camera where it will be subject to high temperatures or high humidity.

ODo not leave the camera and Remote Control Unit (RCU) turned on when not in use. Do

not unnecessarily turn the camera power on and off repeatedly. Do not block the

ventilation slots.

ORefer any servicing to qualified service personnel.

OHandle the camera with care.

OPlace the lens cap on the lens when the camera is not in use. f the lens is not installed,

protect the surface of the prism by placing the body cap over the lens mount hole.

OUse a mild blower or lens cleaning tissue designed for coated lenses to clean the

surface of the lens or prism if it requires cleaning.

OUse a dry cloth to clean the camera if it is dirty. f the dirt is hard to remove, use mild

detergent and wipe gently.

OUse caution when operating the camera near spot lights or bright lights, as well as any

objects and surfaces which may reflect light.

Of the camera or RCU gets wet, turn the power off immediately and have the unit

checked by an authorized service facility.

OFollow normal safety precautions to avoid personal injury.

OUse the camera in an environment where the temperature is within 14°F to 113°F

(–10°C to +45°C), and the relative humidity is within 30 % to 90 %.

OAlways turn the power off when the camera is not going to be used. Operate the

camera and RCU only when there is adequate ventilation.

OOperating a wireless device that generates powerful radio waves near the camera may

adversely affect the output images.

$Main unit

OPT ON CARD

TEM / AWC

YES / ASC

NO / BAR

V DEO OUT

G / L N

/ F REMOTE

R S

DC12V N

;

Parts and Their Functions

1Cable connector

This is used to connect the camera to the camera head unit using a cable.

2MENU switch [MENU (t)]

The menu will appear on the screen when this switch is pressed for about 5 seconds.

When it is pressed while a menu is displayed, the menu item immediately above is

selected.

3ITEM/AWC switch [ITEM/AWC (y)]

When this switch is pressed while a menu is displayed, the menu item immediately

below is selected. While a menu is not displayed (when the camera is in the shooting

mode), it serves as the automatic white balance control (AWC) switch.

4YES/ABC switch [YES/ABC (+)]

When this switch is pressed while a menu is displayed, the sub-menu of a menu item

appears on the screen. When it is pressed while a sub-menu is displayed, the higher of

the two settings shown is selected. While a menu is not displayed, it serves as the

automatic black balance control (ABC) switch.

5NO/BAR switch [NO/BAR (–)]

When this switch is pressed while the main menu is displayed, the next item down can

be selected. When it is pressed while a sub-menu is displayed, the lower of the two

settings shown is selected. When it is pressed for about 5 seconds while a menu is not

displayed, the color bar signals and camera (shooting mode) are switched.

Parts and Their Functions

6Video output connector [VI EO OUT]

The composite video signals are output from this connector.

(1 V [p-p], 75 Ω, BNC connector)

7Iris connector [IRIS]

This is the standard input connector of the lens which comes with an auto iris function.

8Interface/remote connector [I/F REMOTE]

This is used to connect the remote control unit (RCU: WV-RC700A or WV-RC550),

remote control box (RCB: WV-CB700A), etc.

The AW-CA50A26 RCU cable is required to connect the WV-RC700A or WV-RC550.

The AW-CA50T10 RCB cable is required to connect the WV-CB700A.

9Power LE

This lights up red when DC power is supplied to the DC 12V input socket :.

:C 12V input socket [ C 12V IN]

The DC 12 V power supply (2 A or above) is connected here using the AW-CA4T1 DC

power cable.

;Cable clamp

This clamps the AW-CA4T1 DC power cable which has been connected to the DC 12V

input socket :to prevent the cable from becoming disconnected.

<Genlock input connector [G/L IN]

The external sync (black burst) signals are supplied to this connector to achieve genlock

with the camera.

=Option card slot

This slot is used by the option cards.

For further details, refer to the operating instructions of the option card concerned.

?> @

FOCUS

LOCK

FOCUS

LOCK

$Camera head unit

Parts and Their Functions

>Lens mount

A 1/3-inch C mount lens or microscope adapter, etc. is attached here.

?Flange back adjust screw [FOCUS/LOCK]

When the flange back needs to be adjusted, remove the cap, loosen the LOCK screw,

and adjust by turning the FOCUS screw. (Adjustment range: ±0.2 mm)

Upon completion of the adjustment, re-tighten the LOCK screw.

@Cable connector

This is used to connect the head unit to the main unit using a cable.

ACamera mounting adapter

(mounting screw holes: M2.6a10, spring washers provided)

This is used to secure the head unit when it is to be installed on a wall or ceiling or a

tripod is to be used. The head unit can be mounted on the top or bottom surface.

Indice

Altri manuali Panasonic Macchina fotografica digitale

Panasonic

Panasonic AWHE100N - HD INTEGRATED CAMERA Manuale utente

Panasonic

Panasonic AG-NAMS7W Manuale utente

Panasonic

Panasonic Lumix VQT2F10 Manuale utente

Panasonic

Panasonic Lumix DMC-TZ5; Lumix DMC-TZ4 Manuale utente

Panasonic

Panasonic Lumix DMC-FH22 Manuale utente

Panasonic

Panasonic Lumix DMC-F2 Manuale utente

Panasonic

Panasonic DMC-GH3KBODY Manuale utente

Panasonic

Panasonic Lumix DC-ZS200 Istruzioni per l'installazione e la manutenzione

Panasonic

Panasonic Lumix DMC-FX70 Manuale utente

Panasonic

Panasonic Lumix DC-GH5KBODY Specifiche tecniche

Panasonic

Panasonic LUMIX DMC-FT1 Manuale utente

Panasonic

Panasonic DMC-FX68 Specifiche tecniche

Panasonic

Panasonic DMCFZ20PP - DIGITAL STILL CAMERA Manuale utente

Panasonic

Panasonic LUMIX DMC-LZ10 Manuale utente

Panasonic

Panasonic Lumix DMC-TS20 Manuale utente

Panasonic

Panasonic Lumix DMC-FX40EB Manuale utente

Panasonic

Panasonic DMC-CM1 Istruzioni per l'installazione e la manutenzione

Panasonic

Panasonic DMC-FS42 Lumix Manuale utente

Panasonic

Panasonic Lumix DMC-G2K Manuale utente

Panasonic

Panasonic LUMIX DMC-FZ100 Specifiche tecniche

Panasonic

Panasonic Lumix DMC-FX100P Manuale utente

Panasonic

Panasonic DMC-L10K - Lumix Digital Camera SLR Manuale utente

Panasonic

Panasonic Lumix DMC-FX700 Manuale utente

Panasonic

Panasonic LUMIX DC-LX100M2 Istruzioni per l'installazione e la manutenzione

Manuali Macchina fotografica digitale popolari di altre marche

Mercury

Mercury 350K Manuale utente

Pentax

Pentax Optio LS 465 Manuale utente

Sanyo

Sanyo VPC-S1085 Manuale utente

GE SMART A1255 Manuale utente

Point Grey

Point Grey Gazelle Manuale utente

Nikon

Nikon COOLPIX A Manuale utente

Pentax

Pentax P-5 Manuale utente

BlazeVideo

BlazeVideo A280 Manuale utente

Sony

Sony MCA-20 Manuale utente

Sony

Sony Alpha DSLR-A290 Manuale utente

ATIK Cameras

ATIK Cameras One Manuale utente

CohuHD Costar

CohuHD Costar 3930 Series Manuale utente

Leica

Leica M10-R Manuale utente

FujiFilm

FujiFilm FinePix A700 Manuale utente

Lorex

Lorex LNZ81P25 Series Manuale utente

GE J1470S Manuale utente

Sony

Sony A6700 Guida utente

Canon

Canon EOS ELAN7 Manuale utente