Panasonic FZ-VEH1T1AA Manuale utente

Operating Instructions

Instructions d’utilisation

Bedienungsanleitung Vielen Dank, dass Sie sich für den Kauf dieses

Panasonic-Produkts entschieden haben.

Bevor Sie dieses Produkt verwenden, lesen Sie

diese Anweisungen und Vorsichtsmaßnahmen

durch und bewahren Sie sie für die zukünftige

Verwendung auf.

Nous vous remercions d’avoir acheté un produit

Panasonic.

Avant d’utiliser ce produit, veuillez lire les présentes

instructions et précautions et les conserver pour

usage ultérieur.

Thank you for purchasing a Panasonic product.

Before operating this product, please read these

instructions and precautions, and save them for

future use.

取扱説明書保証書付き（日本国内向け）

●取扱説明書をよくお読みのうえ、正しく安全にお使いください。

●ご使用前に「安全上のご注意」（36〜39ページ）を必ずお読みください。

●保証書は「お買い上げ日・販売店名」などの記入を確かめ、

取扱説明書とともに大切に保管してください。

FRANÇAIS 日本語DEUTSCHENGLISH

Cradle

Dockingstation

Station d’accueil

クレードル

Model No.

FZ-VEH1T1AA

DHQX1490ZA/P1 C0718-0Printed in China

For U.S.A.

Federal Communications Commission Radio Frequency

Interference Statement

Note:

RThis equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

– Consult the Panasonic Service Center or an experienced radio/TV technician

for help.

Warning:

RTo assure continued FCC emission limit compliance, use only shielded interface

cables when connecting to computer or peripheral devices.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that

may cause undesired operation.

Responsible party

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102, USA

Support contact: http://business.panasonic.com/support-computerstablets

For Europe

Declaration of Conformity (DoC)

"Hereby, Panasonic declares that this Cradle is in compliance with the essential

requirements and other relevant provisions of EU Council Directives."

Authorised Representative:

Panasonic Testing Centre

Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

This symbol indicates separate collection of waste electrical and

electronic equipment.

More detailed information is contained in the Reference Manual of

the unit.

Interface Cable

RTo ensure Compliance to the EMC Directive, cables that have a ferrite core at

the product side and are 1.2 m or shorter shall be used.

Ecodesign information

Ecodesign information under EU Regulation (EC) No.1275/2008 amended by (EU)

Regulation No.801/2013. From 1 January 2015.

please visit here: www.ptc.panasonic.eu

click [Downloads] ® Energy related products information (Public)

Power consumption in networked standby and guidance are mentioned in the web

site above.

India Only

Declaration of Conformity with the requirements of the E-Waste (Management)

Rules

The Product is in conformity with the requirements of the reduction of hazardous

substances of the E-Waste Rules.

The content of hazardous substance with the exemption of the applications listed in

SCHEDULE II of the E-waste Rules:

1. Lead (Pb) – not over 0.1 % by weight;

2. Cadmium (Cd) – not over 0.01 % by weight;

3. Mercury (Hg) – not over 0.1 % by weight;

4. Hexavalent chromium (Cr6+) – not over 0.1 % by weight;

5. Polybrominated biphenyls (PBBs) – not over 0.1 % by weight;

6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1 % by weight.

For the purpose of recycling to facilitate effective utilization of

resources, please return this product to a nearby authorized

collection center, registered dismantler or recycler, or Panasonic

service center when disposing of this product.

Please see the Panasonic website for further information on

collection centers, etc. , or call the toll-free number below.

Website:

http://www.panasonic.com/in/corporate/sustainability/

panasonic-india-i-recycle-program.html

Service helpline: 1800 103 1333 or 1800 108 1333

Do’s & Don’t: - Ewaste (Management) Amendment Rules 2018

S.No. Do’s Don’t

1 All electrical and electronic

products are required to be

handed over only to the

Authorized recycler.

The product should not be opened

by the User himself/herself, but

only by authorized service

personnel.

2 The product should be handed

over only to authorized recycler for

disposal.

The product is not meant for

re-sale any unauthorized agencies/

scrap dealer/kabariwalahs.

3 Keep the product in isolated area,

after it becomes non-functional/

un-repairable so as to prevent its

accidental breakage.

The product is not meant for

mixing into household waste

stream.

4 Provide information on the

catalogue with product end-of-life.

Do not keep any replaced spare

part(s) from the product in

exposed area.

5 Always Dispose products that

have reached end-of life at

Panasonic India Authorized

service center.

Do not donate old electronic items

to anybody.

6 Wherever possible or as

instructed, separate the packaging

material according to responsible

waste disposal options and sorting

for recycling.

Do not give e-waste to informal

and unorganized sectors like Local

Scrap Dealer/ Rag Pickers.

7 Create environment awareness

PAN India Level.

Do not dispose your product in

garbage bins along with municipal

waste that ultimately reaches

landfill.

Contents

Introduction page 6

Safety precautions page 7

Handling and maintenance page 9

Description of parts page 10

Connections page 11

Docking and removing the unit page 12

Troubleshooting page 13

Specifications page 13

Introduction

This product is designed for use with the Panasonic FZ-T1 series (hereinafter

referred to as "the unit") (as of August 2018).

RAlso thoroughly read the Operating Instructions of the unit.

Main features

– Charge a unit

– Connect a USB device via the micro USB port

Included accessories

RAC Adaptor (Model number FZ-AAE184E) x 1

RDC Cord*1 x 1

ROperating Instructions (this document) x 1

*1 Do not use this with any products other than FZ-AAE184E.

Note:

RSome illustrations in this document may look different from the actual product.

Also, the details of the descriptions may vary due to differences between the

software versions of the unit.

RInformation in this document is subject to change without notice.

Safety precautions

RDo not disassemble, repair, or modify the product.

Doing so may cause a short circuit or overheating, which may result in a fire or

electric shock.

RDo not insert foreign objects into the product.

Doing so may cause a short circuit or overheating, which may result in a fire or

electric shock.

RDo not expose the product to water or other liquids.

Doing so may cause a short circuit, generation of heat, overheating, or rupture,

which may result in a fire, electric shock or injury.

RIf the product gets wet, immediately unplug the AC plug of the AC adaptor,

remove the unit, and then contact your technical support representative.

RDo not touch the product, AC adaptor or DC cord during lightning storms

if the product is connected to an AC adaptor.

There is a remote chance of electric shock.

RImmediately stop using the product if any of the following occurs.

–Product is damaged

–Water or foreign objects enter the product

–Product emits smoke

–Product emits unusual smell or sound

–Product becomes unusually hot

Continuing use may result in fire or electric shock. Immediately unplug the AC

plug of the AC adaptor, remove the unit, and then contact your technical support

representative.

RDo not do anything that may damage the AC adaptor or the DC cord.

Do not damage or modify the cord, place it near hot tools, bend, twist, or

pull it forcefully, place heavy objects on it, or bundle it tightly.

Continuing to use a damaged AC adaptor or DC cord may result in a fire, or

electric shock.

RContact your technical support representative if any malfunction occurs.

RClean dust and other debris on the AC plug of the AC adaptor regularly.

If dust or other debris accumulates on the plug, humidity, etc. may cause a

defect in the insulation, which may result in a fire.

RPull the plug, and wipe it with a dry cloth.

RPull the plug if the product is not being used for a long period of time.

RInsert the AC plug of the AC adaptor completely.

If the plug is not inserted completely, fire due to overheating or electric shock

may result.

RDo not use a damaged plug or loose AC outlet.

RDo not pull or insert the AC plug of the AC adaptor if your hands are wet.

Electric shock may result.

RDo not connect the AC adaptor to a power source other than a standard

household AC outlet.

Otherwise, a fire due to overheating may result. Connecting to a DC/AC

converter (inverter) may damage the AC adaptor. On an airplane, only connect

the AC adaptor/charger to an AC outlet specifically approved for such use.

RDo not allow conductive materials such as metal objects to touch the bus

connector terminals. Also, do not touch the terminals with your hands.

This may result in a fire, burn, or electric shock.

RWhen using the product for extended periods, do not expose your skin to

the AC adaptor for a prolonged period.

Generated heat may cause low-temperature burns.

RDo not leave the product in areas with a high concentration of moisture,

steam, dust, oily vapors, etc.

Foreign material that enters the product may cause a fire or electric shock.

RDo not move the product while the DC cord is connected.

The cord may be damaged, resulting in a fire or electric shock.

RIf the cord is damaged, unplug the AC plug of the AC adaptor immediately.

RDo not subject the AC adaptor to any strong impact.

Using the AC adaptor after a strong impact such as being dropped may result in

a fire or electric shock.

RContact your technical support representative if any malfunction occurs.

RMake sure not to charge the product when it is used with a wet unit.

This may result in a fire or electric shock.

RDo not leave the product in extremely high temperature environments for

an extended period.

Leaving the product where it will be exposed to extremely high temperatures,

such as near fire or in direct sunlight, may deform the product or cause damage

or malfunction to its internal components. Using the product in these conditions

may cause short circuit, insulation defects, etc., which may in turn cause a fire or

electric shock.

RDo not place the product on an unstable surface.

The product may drop, resulting in an injury.

RUse only the supplied AC adaptor and DC cord.

Use of unspecified AC adaptors or DC cords may result in a fire or electric shock.

RWhen cleaning the product or if you will not use it for a long period of

time, unplug the AC plug of the AC adaptor for your safety.

Failure to do so may result in a fire or electric shock.

Handling and maintenance

Obey the following to ensure proper use and operation of this product.

Operating environment

RPlace the product on a flat, stable surface.

RDo not leave the product in places under direct sunlight or around heating

appliances.

RUsing this product continuously in a hot environment will shorten the product life.

Avoid use in these types of environments.

Handling cautions

RDo not drop the product or subject it to impacts. Doing so may cause

malfunctions or damage.

RIf the unit you are using with the product is wet, remove the water by wiping off

the moisture, and thoroughly dry the unit before docking it in the product.

Maintenance

RAlways disconnect the AC adaptor before cleaning the product.

RClean the product with a soft, dry cloth.

RDo not clean the product with solvents such as benzene, thinner, alcohol, or

kitchen detergent because they may affect the surface of the product.

RIf the bus connector terminals are dirty, battery charging may not be possible.

Clean them with a soft, dry cloth.

RBe careful not to bend the bus connector terminals.

Description of parts

APower indicator ( )

Green, lit: Power on

Off: Power off

BBus connector terminals

Supplies power to the unit, and link the unit to the micro USB port.

CDC input jack

Allows you to connect the DC cord to the product.

DCable stopper hook (page 11)

Emicro USB port

FPositioning hole

Allows you to hook and fix the product onto studs for installation on flat bases.

Explanation of graphical symbol on nameplate

: Alternating current

: Direct current

: Class II equipment

Questo manuale è adatto per i seguenti modelli

Indice

Lingue:

Altri manuali Panasonic Stazione di attracco

Panasonic

Panasonic KX-PRL262C Manuale utente

Panasonic

Panasonic KX-PRL262 Manuale utente

Panasonic

Panasonic CF-WEB Series Manuale utente

Panasonic

Panasonic CF-VEBH21U Manuale utente

Panasonic

Panasonic CF-VEBU12U Manuale utente

Panasonic

Panasonic FZ-VEBQ11U Manuale utente

Panasonic

Panasonic CF-VEB531 Series Manuale utente

Panasonic

Panasonic CF-WEB301 Series Manuale utente

Panasonic

Panasonic KX-PRL250EX1 Manuale utente

Panasonic

Panasonic FZ-VEBG21 Series Manuale utente

Panasonic

Panasonic The Toughbook 31 Manuale utente

Panasonic

Panasonic KX-PRD250EX1 Manuale utente

Panasonic

Panasonic CF-VEB Series Manuale utente

Panasonic

Panasonic CF-VVK33 Series Manuale utente

Panasonic

Panasonic CF-VEB481 Manuale utente

Panasonic

Panasonic CF-VEB201 Series Manuale utente

Panasonic

Panasonic VL-WD613EX Manuale utente

Panasonic

Panasonic CF-VEBH11BU Manuale utente

Panasonic

Panasonic Toughbook CF-18 Series Manuale utente

Panasonic

Panasonic CF-WEB184 Series Istruzioni per l'installazione e il funzionamento

Panasonic

Panasonic CF-VEB Manuale utente

Panasonic

Panasonic CF-WEB Series Manuale utente

Panasonic

Panasonic CF-VEBP12U Manuale utente

Panasonic

Panasonic CF-WEB Series Istruzioni per l'installazione e il funzionamento

Manuali Stazione di attracco popolari di altre marche

Sony

Sony Dream Machine XDR-DS12iP Manuale utente

Acer

Acer USB Type-C Dock II Manuale utente

ATEN

ATEN UC-2000 Manuale utente

Xcellon

Xcellon HDD-202 Manuale utente

Dok

Dok CR09 Manuale utente

Philips

Philips BTM630/12 Manuale utente

IOGear

IOGear Travel Pro GUD3C09 Manuale utente

RKI

RKI SDM-E2 Manuale utente

iHome

iHome iP15 Manuale utente

VITURE ONE

VITURE ONE MOBILE DOCK Manuale utente

Lindy

Lindy 42984 Manuale utente

CipherLab

CipherLab 8001 Manuale utente

Pyle

Pyle PIPDSP2 Manuale utente

Avol

Avol AS2350 Manuale utente

Datalogic

Datalogic JoyaTouch Manuale utente

Philips

Philips DC190/79 Manuale utente

Targus

Targus DOCK315EUZ Manuale utente

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuale utente