Panasonic EY7411 - CORDLESS DRILL & DRIVER Manuale utente

© 2007 Matsushita Electric Works, Ltd.

All rights reserved. Unauthorized copying and distri-

bution is a violation of law.

Order Number PTD0703U32CE

F16

Cordless Drill & Driver

Model No. EY7411

North America

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 6

5 Wiring Connection Diagram ---------------------------------- 9

6 Schematic Diagram ---------------------------------------------- 9

7 Exploded View and Replacement Parts List -----------10

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

4

5

6

4 Disassembly and Assembly Instructions

4.1. Disassembly Instructions

Ref. No. 1A Procedure 1A Removal of the grip.

1. Remove both sides of the grip fastening clip by sliding it outward.

2. Remove one grip fastening screw.

3. To separate the grip housing, insert the battery pack into the grip

about one third. Slightly shake the battery until the end of grip will be

opened.

4. Separate the grip A and B with holding the control panel by some-

thing like a fine stick.

Ref. No. 1B Procedure 1A →1B Removal of the housing.

1. Remove 4 screws from the housing.

2. Separate the housing A and B.

3. Remove the clutch handle, adjusting screw, clutch spring and

clutch plate.

7

Ref. No. 1C Procedure 1A →1B →1C Removal of the motor.

1. Remove the motor and the switch block together with the torque

detection PCB from the driving block.

2. Remove the switch from the motor.

Ref. No. 1D Procedure 1A →1B→1C →1D Removal of the driving block.

1. Remove High/Low handle by spreading the spring.

2. The internal parts of driving block can be disassembled.

8

4.2. Assembly Instructions

NOTE: When reassembling, apply grease around the ring and planet gears.

4.3. After Reassembling

Confirm the following pints before retuning the unit to a customer.

9

5 Wiring Connection Diagram

6 Schematic Diagram

10

7 Exploded View and Replacement Parts List

7.1. Exploded View

Altri manuali per EY7411 - CORDLESS DRILL & DRIVER

1

Indice

Altri manuali Panasonic Trapano

Panasonic

Panasonic EY74A2 Manuale utente

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Manuale utente

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Manuale utente

Panasonic

Panasonic EY7441 Manuale utente

Panasonic

Panasonic EY79A3 Manuale utente

Panasonic

Panasonic EY6903 Manuale utente

Panasonic

Panasonic EY6406 - CORDLES DRILL&DRIVER Manuale utente

Panasonic

Panasonic EY 6220 Manuale utente

Panasonic

Panasonic EY7460 - DRILL DRIVER 21.6V Manuale utente

Panasonic

Panasonic EY6803 - HAMMER DRILL DRIVER 12V Manuale utente

Panasonic

Panasonic EY6930 - HAMMER DRILL Manuale utente

Panasonic

Panasonic EY7542 - CORDLESS IMPACT WRENCH Manuale utente

Panasonic

Panasonic EY6780 Manuale utente

Panasonic

Panasonic EY7542LN2L Manuale utente

Panasonic

Panasonic EY 503 Manuale utente

Panasonic

Panasonic EY6406 - CORDLES DRILL&DRIVER Manuale utente

Panasonic

Panasonic EY6450 - DRILL AND DRIVER Manuale utente

Panasonic

Panasonic EY7460 - DRILL DRIVER 21.6V Manuale utente

Panasonic

Panasonic EY6100 - CORDLES DRILL&DRIVER Manuale utente

Panasonic

Panasonic EY6780 Manuale utente

Panasonic

Panasonic EY7940 Manuale utente

Panasonic

Panasonic EY7411LA1S Manuale utente

Panasonic

Panasonic EY 6220 Manuale utente

Panasonic

Panasonic EY7549 Manuale utente

Manuali Trapano popolari di altre marche

Makita

Makita BDF456 Manuale utente

Black & Decker

Black & Decker LDX220 Manuale utente

Hitachi

Hitachi DH 40MA Manuale utente

Challenge

Challenge JO Manuale tecnico di riferimento

Makita

Makita LXFD01 Manuale utente

Festool

Festool T18+3 Manuale utente

Milwaukee

Milwaukee M12 FPDX-202X Manuale utente

EINHELL

EINHELL TE-RH 32 E Manuale utente

Makita

Makita DHP484 Manuale utente

Makita

Makita FD05 Manuale utente

Bosch

Bosch PSB 530 RA Manuale utente

Maximum

Maximum 054-1359-4 Manuale utente

Makita

Makita HP332D Manuale utente

Raider

Raider RDP-HD31H Manuale utente

Bort

Bort BPM-1400x2 Manuale utente

Black & Decker

Black & Decker 7266 Manuale utente

KENT USA

KENT USA TRD1230 Manuale utente

Bosch

Bosch GSB 19-2 RE Manuale utente