Panasonic EY74A1 Manuale utente

© Panasonic Eco Solutions Power Tools Co., Ltd.

2012. All rights reserved. Unauthorized copying and

distribution is a violation of law.

Order Number PTD1208E02CE

Drill & Driver

Model No. EY74A1

Europe

Oceania

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 7

5 Wiring Connection Diagram ---------------------------------14

6 Schematic Diagram ---------------------------------------------14

7 Exploded View and Replacement Parts List -----------15

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

3.1. Troubleshooting Guide (Refer to Wiring Connection Diagram)

4

5

6

3.2. Trial Operation (after checking Troubleshooting Guide)

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• There is no dust or deformation on battery terminals.

• Confirm if there is no dirt when repairing.

3.2.2. Operation

• Confirm the forward and reverse side of rotation.

• Confirm if LED lights ON. Once battery pack is removed, press the switch handle; otherwise LED does not light ON.

• Check if the motor rotation become higher as the amount of depression of switch handle.

• Check if the rotation speed is normal rated value.

High : 1,750/min (rpm) at 18V, 1,400/ min (rpm) at 14.4V

Low : 600/min (rpm) at 18V, 450/ min (rpm) at 14.4V

• Confirm the action when setting the drill mode .

• Confirm if the rotation stops immediately when releasing the switch handle.

• Confirm if the chuck jaws move smoothly and hold the bit firmly.

• Check if the clutch torque changes suited for the number of clutch.

• Confirm if the chuck is assembled firmly and chuck jaws operate normally.

• Confirm if there is no abnormal sound when shaking the unit with the switch on.

7

4 Disassembly and Assembly Instructions

*Please assemble by opposite procedure.

4.1. How to remove the keyless chuck

4.2. How to remove the housing

8

4.3. How to remove the lead wires from the motor brush assembly and the

control PCB.

4.4. How to remove the switch assembly

9

4.5. How to remove the driving block

4.6. How to remove the motor carbon brush assembly

10

4.7. How to remove the driving block and the motor assembly

4.8. How to remove the control PCB

Altri manuali per EY74A1

1

Indice

Altri manuali Panasonic Trapano

Panasonic

Panasonic EY7411 - CORDLESS DRILL & DRIVER Manuale utente

Panasonic

Panasonic EY 503 Manuale utente

Panasonic

Panasonic EY6780 Manuale utente

Panasonic

Panasonic EY6225CQ - CORDLESS Manuale utente

Panasonic

Panasonic EY7410LA2S Manuale utente

Panasonic

Panasonic EY7410 - DRILL DRIVER 3.6V Manuale utente

Panasonic

Panasonic EY78A1LJ2G Manuale utente

Panasonic

Panasonic EY6450-U1 Manuale utente

Panasonic

Panasonic EY503B Manuale utente

Panasonic

Panasonic EY7840X Manuale utente

Panasonic

Panasonic EY6931 - 15.6V HAMMER DRILL Manuale utente

Panasonic

Panasonic EY7960 - HAMMER DRILL 21.6V Manuale utente

Panasonic

Panasonic EY74A1 Manuale utente

Panasonic

Panasonic cs-903ke Manuale utente

Panasonic

Panasonic EY78A1 Manuale utente

Panasonic

Panasonic EY6405 - CORDLES DRILL&DRIVER Manuale utente

Panasonic

Panasonic EY7549 Manuale utente

Panasonic

Panasonic EY7442 Manuale utente

Panasonic

Panasonic EY7441 Manuale utente

Panasonic

Panasonic EY7840 Manuale utente

Panasonic

Panasonic EY6230 - CORDLES DRILL&DRIVER Manuale utente

Panasonic

Panasonic EY7460 - DRILL DRIVER 21.6V Manuale utente

Panasonic

Panasonic EY7441 Manuale utente

Panasonic

Panasonic EY74A2 Manuale utente

Manuali Trapano popolari di altre marche

Makita

Makita BDF456 Manuale utente

Black & Decker

Black & Decker LDX220 Manuale utente

Hitachi

Hitachi DH 40MA Manuale utente

Challenge

Challenge JO Manuale tecnico di riferimento

Makita

Makita LXFD01 Manuale utente

Festool

Festool T18+3 Manuale utente

Milwaukee

Milwaukee M12 FPDX-202X Manuale utente

EINHELL

EINHELL TE-RH 32 E Manuale utente

Makita

Makita DHP484 Manuale utente

Makita

Makita FD05 Manuale utente

Bosch

Bosch PSB 530 RA Manuale utente

Maximum

Maximum 054-1359-4 Manuale utente

Makita

Makita HP332D Manuale utente

Raider

Raider RDP-HD31H Manuale utente

Bort

Bort BPM-1400x2 Manuale utente

Black & Decker

Black & Decker 7266 Manuale utente

KENT USA

KENT USA TRD1230 Manuale utente

Bosch

Bosch GSB 19-2 RE Manuale utente