Panasonic KX-FT71LA-B Manuale utente

ORDERNO. KMF0111517C3

Personal FAX

KX-FT71LA-B

(for LatinAmerica)

Unauthorized copying and distribution isaviolation of law.

1. INTRODUCTION

1.1. LCD MESSAGE

1.2. SAFETY PRECAUTIONS

1. Before servicing, unplug the AC power cord to prevent an electric

shock.

2. When replacing parts, use onlythe manufacturer's recommended

components.

3. Check the condition of the power cord. Replace ifwear or damage

isevident.

4. After servicing, be sure to restore the lead dress, insulation

barriers, insulation papers, shields, etc.

5. Before returning the serviced equipment to the customer, be sure

to perform the following insulation resistance test to prevent the

customer from being exposed to shock hazards.

1.3. INSULATIONRESISTANCETEST

1. Unplug the power cord and short the twoprongs of the plug with

ajumper wire.

2. Turn on the power switch.

3. Measure the resistance value with an ohmmeter between the

jumpered AC plug and each exposed metal cabinet part (screw

heads, control shafts, bottom frame, etc.).

Note: Some exposed parts maybe isolated from the chassisby

design. These will read infinity.

4. Ifthe measurement isoutside the specified limits, there isa

possibilityof ashock hazard. / The equipment shouldbe repaired

and rechecked before itisreturned to the customer.

1.4. FORSERVICETECHNICIANS

ICs and LSIs are vulnerable tostatic electricity. / Whenrepairing, the following precautions will

helpprevent recurring malfunctions.

1. Cover the plasticpart's boxes with aluminum foil.

2. Ground the soldering irons.

3. Use aconductive mat on the worktable.

4. Donot touch the ICor LSI pins with bare fingers.

1.5. BATTERYCAUTION

CAUTION

Danger of explosion ifthe batteryisreplaced incorrectly. Replace

onlywith the same or equivalent type recommended bythe

manufacturer. Discard used batteries according to following caution

Disposal of lithium batteries shouldbe performed bypermitted,

professional disposal firms knowledgeableinstate government

federal and local hazardous materialsand hazardous waste

transportation and disposal requirements.

Abatterycontinues to have no transportation limitations as long as

itisseparated to prevent short circuits and packed instrong

packaging.

Commercial firms that dispose of anyquantityof lithium cells

shouldhave amechanism inplace to account for theirultimate

disposition. Thisisagood practice for all types of commercial or

industrial waste.

Recommend Type Number:

PFSU1004Z (BAT501) Manufactured byTOSHIBA

CR2032 (BAT501) Manufactured byMATSUSHITA

PQPCR2032H09 (BAT501) Manufactured bySONY

1.6. AC CAUTION

Forsafety, before closing the lowercabinet, please make sure of the following precautions.

(1) The earthleadis fixedwiththe screw.

(2) The AC connectoris connectedproperly.

(3) Wrapthe EarthLeadleadaround the core 2 times.

1.7. PERSONALSAFETY PRECAUTIONS

1.7.1. MOVING SECTIONS OFTHE UNIT

Be careful not tolet yourhair, clothes, fingers, accessories, etc., become caught inanymoving

sections of the unit. / The moving sections of the unit are the rollers and a gear. There is a

separation rollerand a document feedrollerwhichare rotatedbythe document feedmotor. A

gearrotates the tworollers. Be careful not totouchthemwithyourhands, especiallywhenthe

unit is operating.

1.7.2. LIVE ELECTRICALSECTIONS

All the electrical sections of the unit suppliedwithAC powerbythe AC powercordare live. /

Neverdisassemble the unit forservice withthe AC powersupplypluggedin.

(Bottomview)

1.8. FEATURES

General

-Helpfunction

Please refer to WHEN YOU DON'T KNOW HOW TO OPERATE THE

UNIT, USE THE HELP FUNCTION.() to print below features.

Display:(Refer to LCD MESSAGE ())

-DIRECTORY

-RECEIVE MODE

Facsimile

-Space Saving Compact Design

-Resolution: Standard, Fine/Photo, Super Fine

-Copier Function

-AutomaticDocument Feeder (10 Sheets)

-HelpPrintout

-Easy-to-view LCD (15 Characters)

IntegratedTelephone System

-ElectricVolume Control

-On-hook dialing

-Redialing function

-Temporarytone dialing

-ElectricTelephone directory

1.9. SPECIFICATIONS

ApplicableLines:

PublicSwitched Telephone Network

Document Size:

Max. 216 mm (8 1/2”) inwidth

Max. 600 mm (23 5/8”) inlength

Effective Scanning Width:

208mm (8 3/16”)

Recording Paper Size:

216 mm max. 30 m(8 1/2”×98”) roll

Effective Printing Width:

208 mm (8 3/16”)

Transmission Time*:

Approx. 15 s/page (Original mode)**

Approx. 30 s/page (G3Normal mode)

Scanning Density:

Horizontal:

8pels/mm (203 pels/inch)

Vertical:

3.85 lines/mm (98 lines/inch)—STANDARD

7.7lines/mm (196 lines/inch)—FINE/PHOTO

15.4lines/mm (392 lines/inch)—SUPERFINE

Halftone Level:

64-level

Scanner Type:

Contact Image Sensor (CIS)

Printer Type:

Thermal Printing

Data Compression System:

Modified Huffman (MH), Modified READ (MR)

Modem Speed:

9,600 / 7,200 / 4,800 / 2,400 bps; AutomaticFallback

Operating Environment:

5°C—35°C(41°F—95°F), 45 %—85 %RH (Relative Humidity)

Dimensions (H×W×D):

118 mm × 338 mm × 246 mm (4 5/8” × 13 5/16” × 911/16”)

Mass (Weight):

Approx. 2.5kg (5.5lb.)

Power Consumption:

Standby:Approx. 5.5W

Transmission: Approx. 20 W(When sending the ITU-T No.1Test

Chart)

Reception: Approx. 33 W(When receiving the ITU-T No. 1Test

Chart)

Copy:Approx. 30 W(When copying the ITU-T No. 1Test Chart)

Maximum: Approx. 120 W(When copying a100 %black document)

Power Supply:

120 VAC, 60 Hz

*Transmission speeddepends upon the contents of the pages, resolution, telephone line

conditions and capabilityof the otherparty's machine.

** Transmission speedis basedupon the ITU-TNo. 1 Test Chart and original mode. (Referto

TEST CHART ().)

If the capabilityof the otherparty’s machine is inferiortoyourunit, the transmission time may

be longer.

Note:

-Anydetailsgiven inthese instructions are subject to change

without notice.

-The pictures and illustrations inthese instructions mayvary

slightlyfrom the actual product.

1.10. OPTIONALACCESSORY

Model No. Description Specifications

KX-A106 Standardthermal recording

paper 216 mm × 30 m(8 1/2”×98’) roll, with25 mm (1”)

core

1.11. TEST CHART

1.11.1. ITU-TNO.1TESTCHART

1.11.2. CCITNO. 2TESTCHART

Altri manuali Panasonic Fax

Panasonic

Panasonic KX-FM255 Manuale utente

Panasonic

Panasonic KX-PD215DL Manuale utente

Panasonic

Panasonic KX-FP205AL Manuale utente

Panasonic

Panasonic KX-FMC230 Manuale utente

Panasonic

Panasonic KX-FP145C Manuale utente

Panasonic

Panasonic Panafax UF-5300 Manuale utente

Panasonic

Panasonic KX-PW201CL Manuale utente

Panasonic

Panasonic KX-L5CW Manuale utente

Panasonic

Panasonic Panafax UF-6100 Manuale utente

Panasonic

Panasonic KX-FC962HK Manuale utente

Panasonic

Panasonic KX-FPG371 Manuale utente

Panasonic

Panasonic KX-FLB756E Manuale utente

Panasonic

Panasonic KX-FPC91 Manuale utente

Panasonic

Panasonic KX-FM280 Manuale utente

Panasonic

Panasonic KX-PW504E2 Manuale utente

Panasonic

Panasonic KXFC265E Manuale utente

Panasonic

Panasonic KX-FLB803EX Manuale utente

Panasonic

Panasonic KX-F3100 Manuale utente

Panasonic

Panasonic KX-FL513HK Manuale utente

Panasonic

Panasonic KX-FP265 Manuale utente

Panasonic

Panasonic KX-FC258FX Manuale utente

Panasonic

Panasonic PANAFAX DF-1100 Manuale utente

Panasonic

Panasonic KX-FP152 Manuale utente

Panasonic

Panasonic UF-7200 Manuale utente

Manuali Fax popolari di altre marche

Samsung

Samsung SF-515 Manuale utente

Radio Shack

Radio Shack TFX-1031 Manuale utente

imagistics

imagistics 2030 Manuale

Furuno

Furuno FAX-30 Manuale utente

Savin

Savin 3740 Manuale

Sharp

Sharp FO-51 Manuale utente

Muratec

Muratec MFX-C3035 Manuale utente

Canon

Canon FAX-L400 Manuale utente

Ricoh

Ricoh 1000L Guida rapida

Sharp

Sharp FO-3150 Manuale utente

Kyocera

Kyocera KM-F1060 Manuale utente

Sharp

Sharp FO-2970M Manuale utente

Canon

Canon JX510P Manuale utente

Mita

Mita LDC-870 Manuale

Brother

Brother MFC 640CW - Color Inkjet - All-in-One Manuale utente

Samsung

Samsung FX100 Manuale

Sharp

Sharp MX-FXX1 Manuale utente

Develop

Develop ineo 25e Manuale utente