Panasonic ER?GB50 Manuale utente

© Panasonic Electric Works Co., Ltd. 2010.

All rights reserved. Unauthorized copying and distri-

bution is a violation of law.

Order Number SD1010A67CE

AC/Rechargeable Hair Clipper

Model No. ER-GB50

Asia

Middle East

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 4

5 Wiring Connection Diagram ---------------------------------- 8

6 Schematic Diagram ---------------------------------------------- 9

7 Exploded View and Replacement Parts List -----------10

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

4

4 Disassembly and Assembly Instructions

4.1. Disassembly Instructions

1. Remove the blade.

2. Insert a slotted screwdriver into the slit of dial cover firmly

and raise it with the driver.

NOTE :

Make sure there is NO scratch or damage on the

parts.

3. Loosen a screw and take out the dial with the dial mount-

ing base.

5

4. Loosen two screws.

5. Remove the housing C.

6. Loosen a screw.

7. Insert a slotted screwdriver under the front panel, then

raise the front panel with the driver slightly.

6

8. Loosen 8 screws and remove the housing A.

9. Loosen 2 screws and remove the module assembly with

rechargeable battery first, then remove the motor holder.

7

4.2. Assembly Instructions

For assembly, reverse the order of disassembly.

1. Insert the rechargeable battery into the battery holder.

NOTE:

Make sure to attach the washer and O-ring to the bat-

tery terminal. The O-ring for the battery terminal is the

thickest. Confirm if the O-ring is attached properly.

• Battery terminal : washer x 1and O-ring x 1

• terminal pins: o-ring x 1

2. Set the motor holder first, then set the module assembly

with rechargeable battery.

NOTE:

Make sure that two motor lead wires are set within the

space between the battery holder and the motor

holder to prevent pinching.

NOTE:

Make sure to attach the switch cam with the lowest

position.

Apply the grease (G741S) on the housing O-ring.

3. Fix the motor holder in housing A with two screws.

NOTE:

Make sure that two O-rings are set.

4. Set the front panel.

NOTE:

Hook the bottom side first and fix the front panel.

Make sure to set the switch handle to the "0" position.

5. Set the click spring.

8

6. Set the housing C.

NOTE:

Make sure to set the rack.

Insert the hook of housing C under the front panel

first.

7. Fix the dial and the dial mounting base by a screw.

NOTE:

Make sure to set the slit at left side.

Apply the grease (G741S) on the gear of dial.

5 Wiring Connection Diagram

9

6 Schematic Diagram

Model No. : ER-GB50 Exploded View

7 Exploded View and Replacement Parts List

Altri manuali per ER?GB50

1

Indice

Altri manuali Panasonic Tagliacapelli

Panasonic

Panasonic ER508 Manuale utente

Panasonic

Panasonic ER-GC50 Manuale utente

Panasonic

Panasonic ER-GP21 Manuale utente

Panasonic

Panasonic ER-HGP72 Manuale utente

Panasonic

Panasonic ER1410 Manuale utente

Panasonic

Panasonic ER-GC50-K520 Manuale utente

Panasonic

Panasonic ER-FGP86 Manuale utente

Panasonic

Panasonic ER-206 Manuale utente

Panasonic

Panasonic ER-GP84 Manuale utente

Panasonic

Panasonic ER1411 Manuale utente

Panasonic

Panasonic ER-GP22 Manuale utente

Panasonic

Panasonic ER-CA70 Manuale utente

Panasonic

Panasonic ER-GP21 Manuale utente

Panasonic

Panasonic ER-FGP72 Manuale utente

Panasonic

Panasonic ER-GP30 Manuale utente

Panasonic

Panasonic ER1611 Manuale utente

Panasonic

Panasonic ER1511 Manuale utente

Panasonic

Panasonic ER?GC20 Manuale utente

Panasonic

Panasonic ER154-E8 Manuale utente

Panasonic

Panasonic ER-SC60 Manuale utente

Panasonic

Panasonic ER-GC52 Manuale utente

Panasonic

Panasonic ER-HGP82 Manuale utente

Panasonic

Panasonic EH-KA81 Manuale utente

Panasonic

Panasonic ER1611 Manuale utente

Manuali Tagliacapelli popolari di altre marche

Clatronic

Clatronic HSM 800 Manuale utente

Mellerware

Mellerware MACRO ALDANY MA20001 Manuale utente

Create

Create CLIPPER EASY Manuale utente

VALERA

VALERA X-Master 652 Manuale utente

Wahl

Wahl 1870Li Manuale utente

Remington

Remington HC5780 Manuale utente

Lister

Lister Legend Manuale utente

Philips

Philips HC5440/80 Manuale utente

Andis

Andis MBA 23125 Manuale utente

Philips

Philips Philishave HQC488/61 Manuale utente

Shear Magic

Shear Magic Nifty 1800 Manuale utente

Philips

Philips QC5390 Manuale utente

Andis

Andis US-1 Guida di riferimento rapido

Philips

Philips HC5450 Manuale utente

Andis

Andis US-1 Istruzioni per l'installazione

Remington

Remington Classic HC450 Manuale utente

Andis

Andis ML Istruzioni per l'installazione

O'Barber

O'Barber MINI SLIDE Manuale utente