Panasonic EYFMA2CR Manuale utente

Questo manuale è adatto per i seguenti modelli

7

Altri manuali Panasonic Avvitatore a impulsi

Panasonic

Panasonic EY75A7 Manuale utente

Panasonic

Panasonic EYFLA4AR Manuale utente

Panasonic

Panasonic EY7201 - 12V IMPACT Manuale utente

Panasonic

Panasonic EYFPA1J Manuale utente

Panasonic

Panasonic EY75A7 Manuale utente

Panasonic

Panasonic EY7201 - 12V IMPACT Manuale utente

Panasonic

Panasonic EY7552 Manuale utente

Panasonic

Panasonic EY75A7 Manuale utente

Panasonic

Panasonic EY7206 - 12V IMPACT DRIVER Manuale utente

Panasonic

Panasonic EYF581-U1 Manuale utente

Panasonic

Panasonic EY6506-U1 Manuale utente

Panasonic

Panasonic EYFPA1J Manuale utente

Panasonic

Panasonic EY7206GQW Manuale utente

Panasonic

Panasonic EY75A2 Manuale utente

Panasonic

Panasonic EY75A7 Manuale utente

Panasonic

Panasonic EY7202-U1 Manuale utente

Panasonic

Panasonic EY7552 Manuale utente

Panasonic

Panasonic EYFLF1XC Manuale utente

Panasonic

Panasonic EY76A1 Manuale utente

Panasonic

Panasonic EY7202 - 12V IMPACT DRIVER Manuale utente

Panasonic

Panasonic EY76A1 Manuale utente

Panasonic

Panasonic EY7206 - 12V IMPACT DRIVER Manuale utente

Panasonic

Panasonic EY7540LN2L Manuale utente

Panasonic

Panasonic EY-6506 Manuale utente

Manuali Avvitatore a impulsi popolari di altre marche

stayer

stayer IW500D Manuale utente

Makita

Makita DTD152 Manuale utente

Milwaukee

Milwaukee M12 FID Manuale utente

Grizzly

Grizzly H6140 Manuale utente

Makita

Makita BTW450 Manuale utente

Ozito

Ozito LID-3000 Manuale utente

Astro Pneumatic Tool

Astro Pneumatic Tool 1812 Manuale utente

Greenlee

Greenlee HW3 Manuale utente

Sthor

Sthor 57091 Manuale utente

Makita

Makita DTD145 Manuale utente

Hilti

Hilti SIW 2-A12 Manuale utente

Ryobi

Ryobi R18IW3 Manuale utente

Parkside

Parkside PDSSA 20-Li A1 Manuale utente

Flex

Flex FX1471 Manuale utente

SATA

SATA 51075C Manuale tecnico

Cembre

Cembre NR-11P Manuale utente

Makita

Makita BTP131RFE Manuale utente

DeWalt

DeWalt XR Li-ion DCF902 Manuale utente

© Panasonic corporation 2019. All rights reserved.

Unauthorized copying and distribution is a violation

of law.

Order Number PTD1905E02AE

Cordless Impact Driver / Cordless Impact Wrench

Model No. EYFMA2CR

Model No. EYFMA2PR

Model No. EYFLA9CR

Model No. EYFLA9PR

Model No. EYFLA7AR

Model No. EYFLA8AR

Model No. EYFLA8CR

Model No. EYFLA8PR

Europe

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 8

5 Exploded View and Replacement Parts List ----------- 10

Please file and use this manual together with the service manual for Model No. EYFLA9C, EYFMA2C,

EYFLA9P, EYFMA2P, order No. PTD1902E58CE and EYFLA7A, EYFLA8A, EYFLA8P, order No.

PTD1902E59AE.

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

3.1. Troubleshooting Guide

3.2. Trial Operation (after checking Troubleshooting Guide)

3.2.1. Operation

4

5

6

7

3.2.2. Integrity

• With the switch activated, shake the tool back and forth and up and down and verify that its sound does not change excessively.

• Verify that there is no dirt, scratching, or other damage on the tool’s exterior from the repair process.(Check the shaft cover

assembly carefully for surface scratches since it is made of aluminum.)

8

4 Disassembly and Assembly Instructions

*To reduce the risk of injury, always remove battery pack before removing/installing the tool.

4.1. How to remove the module assembly.

4.2. Checking and setting the Module assembly's DIP switches.

9

4.3. Wiring and Assembly Points.

Model No. : EYFMA2CR Exploded View

5 Exploded View and Replacement Parts List