Panasonic Condominiums HA D Series Manuale utente
How to Use D Series
Introduction
This is the Instruction Manual for customers who have installed the security intercom 1
M type Base Unit (Part number: VGDT, VGDB, VGW) for the Condominiums HA D serie
s, the extension adapter for home (VGD8210), and the mobile phone adapter with the f
ollowing configuration.
Things you can do with the mobile phone adapter
Forward calls to the Base Unit on to your smartphone/tablet to talk.
* Depends on the Mansion HA system settings.
Unlock the condominium entrance in response to a call from the Main Entrance.
Receive notification of alarms and notices.
* For details, confirm on the Base Unit.
How-Tos
Using the mobile phone adapter
Confirming the recommended device/wireless LAN router
Registering a smartphone/tablet
Answering a call
Confirming an alarm
Confirming a notice
Setting up the application
Deleting a registered device
Initializing the registered devices
Making an inquiry
Using the mobile phone adapter
Required devices and environment
Base Unit
1M Type Security Intercom Base Unit for Mansion HA D S
eries (Product No. VGDT, VGDB)
(Connection to the extension adapter for home (VGD821
0) required.)
Base Unit Condominium HA System D Series Windea-C PLUS (Prod
uct No. VGW)
(Connection to the extension adapter for home (VGD821
0) required.)
Smartphone
Tablet*1
Android or iOS device
Installation of Interphone App required.
LAN environment Home wireless LAN environment required.
Internet connection environment not required.
Wireless LAN router*1 The wireless LAN router is required for connecting the s
martphone/tablet.
*1: For information on recommended devices and devices whose operation are confirmed, please refer to ou
r companyʼs website.
Note that some devices are not supported.
Caution
If you buy a new smartphone/tablet, delete the registration information of the pr
evious device from the mobile phone adapter using Interphone App and register
again with the new smartphone/tablet.
Registering a smartphone/tablet
Preparation
Connect the smartphone/tablet to the wireless LAN router.
Using the Interphone App requires your smartphone/tablet to be connected to the wirel
ess LAN. For the connection method, please refer to your smartphone/tablet operating
instructions.
Caution
Your smartphone/tablet must be connected to the same network as the mobile pho
ne adapter.
Registering a smartphone/tablet with the mobile phone adapter
1. Press the MENU button on the Base Unit.
2. Put the mobile phone adapter into registration mode.
Put the Base Unit into registration mode by following the procedure below. Then, m
ake the registration from your smartphone/tablet.
Touch “Setting”.
Select “Mobile Device Adapter Setting” → “Register Cell Phone” in order.
Touch “Yes”.
3. Launch the Interphone App on your smartphone/tablet.
Select “Register” → “Register Mobile Phone Adapter” in order.
4. Enter the information to register the smartphone/ tablet.
Enter the following information and touch “REGISTRATION”.
Registration Name:
Name to identify the smartphone/tablet you are operating.
MAC Address/Device Code:
Information confirmed on the Base Unit.
5. When a registration complete message displays, touch “Confirm”.
Repeat steps 3 to 5 to register multiple smartphones/tablets.
6. Touch “Finish Registration” on the Base Unit to finish the registration.
Reboot the mobile phone adapter. Wait for the reboot to finish (about 1 minute). Th
e service is ready for use when the following icon displays on the smartphone/tablet
screen.
Caution
You can register up to a total of eight smartphones/tablets with the mobile phon
e adapter.
* When registering more than eight, delete the registration of unnecessary ones
in advance.
On Android devices, the registration status is displayed on the status bar as follows:
Icon Status Description
Initial statu
s
(Unregister
ed)
Status after Interphone App installation. Proceed to register the smartphone/tablet.
Normal stat
us
The smartphone/tablet can communicate normally with the Base Unit.
The Interphone App is available for use.
Service
not
available
The smartphone/tablet cannot communicate with the Base Unit; therefore, it cannot receive eit
her alarms or notices. Confirm the following:
Is Wi-Fi feature on the smartphone/tablet enabled?
Is the router power turned on?
Is the IP address assigned from the DHCP server correct?
Communication may be impossible if there are two DHCP servers.
Is the App stopped due to the energy saving settings of your smartphone/tablet?
Service
error status The smartphone/tablet is deleted. Register again.
Error screen
Touching “REGISTER” on the smartphone/tablet when the Base Unit is not in registr
ation mode displays the screen below. Confirm the content and touch “Confirm”.
Put the base unit in registration mode
Questo manuale è adatto per i seguenti modelli
4
Altri manuali Panasonic Sistema di interfono
Panasonic
Panasonic VL-MV10 Manuale utente
Panasonic
Panasonic VL-VN1700 Manuale utente
Panasonic
Panasonic VL-SWD501UBX Manuale utente
Panasonic
Panasonic LST 116 Manuale utente
Panasonic
Panasonic VL-SV70 Manuale utente
Panasonic
Panasonic VL-V700 Manuale utente
Panasonic
Panasonic VL-SV74 Manuale utente
Panasonic
Panasonic VL-SW102BX Manuale utente
Panasonic
Panasonic VL-SWD273 Manuale utente
Panasonic
Panasonic KX-T7765 Manuale utente
Panasonic
Panasonic VL-SWD272 Manuale utente
Panasonic
Panasonic VL-MW274 Manuale utente
Panasonic
Panasonic KX-T7765X Manuale utente
Panasonic
Panasonic VL-GM301A Istruzioni operative
Panasonic
Panasonic VL-SV30 Manuale utente
Panasonic
Panasonic VL-V591 Istruzioni operative
Panasonic
Panasonic VL-SV74BX Manuale utente
Panasonic
Panasonic VL-V900 Manuale utente
Panasonic
Panasonic VL-SWD501AZ Manuale utente
Panasonic
Panasonic Windea VGDT18143W Manuale utente
