Panasonic DT50 series Istruzioni per il montaggio
DT50 series
M0212-0
All settings
Picture
Setting menu
Adjust the image or picture quality.
•Some menus are grayed out depending on the input signal or condition.
(e.g. will be grayed out if the aspect is not set to ZOOM.)
1. Display the menu
_1 M EN U I
2, Select from menu bar
Select desired menu using _ /V from menu bar and press
3, Select the item and adjust
Select desired item using /\. /V and adjust with <1 /
Shows the functions that can be adjusted.
Some functions will be disabled depending on the type of input signal.
will be grayed out if no changes are made.
139
All settings
Picture
Basic settings (1)
_IMENUI >
Reset to
defaults
Picture mode
Back light
Contrast,
Brightness,
Color, Tint,
Sharpness
Vivid/
Standard/
Cinema/
Game/
Custom
• Resets all picture adjustments to factory
default settings except for advanced settings.
° Adjusts the picture quality according to ambient
lighting conditions or situation.
° When changing picture mode from/to Game
the screen will momentarily go black. This is
normal. The blacking out of the screen is normal
and is due to a change of parameters in order to
improve the response to video games.
Adjusts the luminance of the back light.
• Adjusts the color, brightness, etc. for each
picture mode to suit your taste.
° Display range
ContrastlBrightnesslColorlSharpness ' O - 100
Tint :-50 - +50
140
All settings
Picture
Basic settings (2)
_LMENUJ >
Color temp.
Color mgmt.
A. I picture
C.A.T.S.
Video NR
Cool/
Normal/
Warm
Off/On
Off/On
Off/On
Off/On/Auto
•Selects color temperature preference, from
"cool" (bluish) to "warm" (reddish) or normal.
• On: Enhances green and blue color
reproduction, especially outdoor scenes.
• Controls dark areas without affecting the black
level or brightness in the overall picture.
• Contrast Automatic Tracking System (C.A.T.S.)
adjusts the screen brightness and contrast
according to the room's ambient light conditions.
This ECO feature automatically dims the
brightness of the screen when the room lighting is
lowered. C.A.T.S. features a built-in delay when
the lighting conditions change. The adjustment
happens gradually.
If you prefer a consistent brightness, disable
C.A.T.S. by:
•> > scroll down to C.A.T.S.
and turn it off.
Or
•> > _:::::_J::::then
select viewing mode such as Custom,
Note: Standard picture mode automatically sets
CAT.S. to On.
•Reduces noise, commonly called snow. Leave
it off when receiving a strong signal.
141
All settings
Picture
Aspect adjustments
_ IMENUI > >
Screen format
HD size
H size
FULL/H-FILL/
JUST/4:3/
ZOOM
Size l/Size 2
Size l/Size 2
• Changes the format (aspect ratio). Lets you
choose the aspect depending on the format of
received signal.
• Selects between 95 % (Size 1) or 100 %
(Size 2) for the scanning area with High Definition
signal.
• Adjusts the horizontal display range to reduce
noise of both side edges of an image.
Size 2 Adjusts the image size according to the
aspect mode to reduce noise.
Aspect mode: 4:3
•The width will be decreased on both sides to
reduce noise.
Aspect Ratio: FULLIJUST(H-FILLIZOOM)
•The width will be increased on both sides to
reduce noise.
Zoom ,, Adjusts vertical alignment and size when
adjustments aspect setting is "ZOOM".
142
All settings
Picture
PC adjustments (1)
L_ IMENU > >
Reset to
defaults
Sync H&V
On green
• Resets all PC adjustments to factory default
settings.
•The H and V sync signals are input from the
HD/VD connector.
• Uses a synchronized signal on the Video G
signal, which is input from the G connector.
Dot clock • Alleviates the problem if a picture appears to
be vertically-striped, flickers partially or is blurred.
H-position • Adjusts the horizontal position using left/right
cursor button.
V-position • Adjusts the vertical position using left/right
cursor button.
143
All settings
Picture
PC adjustments (2)
IMENUI > >
Clock phase
Input
resolution
•Alleviates the problem if the whole picture
appears to flicker or is blurred. First adjust the Dot
Clock to get the best possible picture, then adjust
the Clock phase so that a clear picture appears.
• It may not be possible to display a clear picture
due to poor input signals.
• Switches to wide display and selects the
appropriate screen resolution.
• VGA (640 x 480 pixels), WVGA (852 x 480
pixels), XGA (1,024 x 768 pixels), WXGA (1,280 x
768 pixels)
• Options change depending on signals.
H-frequency • Displays the H (Horizontal)/V (Vertical)
V-frequency frequencies.
Display range
Horizontal: 15- 110 kHz
Vertical: 48 - 120 Hz
144
All settings
Picture
HDMI settings
_ IMENUI > >
HDMI/DVI
RGB range
(HDMI)
Content type
(HDMI)
Standard
(16-235)/
Nonstandard
Off/Auto/
Photos/
Graphics
• Prevents the blown out highlights and blocked
up shadows when a wide-range signal is received.
Selects between standard RGB range (16-235
bits) or non-compliance (0-255 bits).
• Auto: Switches the RGB range (Standard
(16-235)/Nonstandard) depending on the HDMI
signal information.
• Sets content type to each HDMI input.
• Auto: Switches content type automatically
depending on the HDMI signal information.
• Photo: Best setting for JPEG viewing.
• Graphics: Best setting for On-Screen display
of connected equipment.
145
All settings
Picture
Advanced picture (1)
_ IMENUI > >
3D Y/C filter
Color matrix
Block NR
Mosquito NR
Motion picture
setting
Off/On •Minimizes rough edges (dot crawl) in the
picture from a composite source.
SD/HD ° Selects image resolution of component-
connected devices.
° SD: Standard Definition HD: High Definition
° Only used with 480p video signal.
Off/On/Auto ° Reduces noise of specific digital signals of
DVD, Cable box, etc.
Off/On ° Reduces HDTV flicker noise in the contoured
Off/Weak/
Medium/
Strong
sections of a compressed image.
° Improves motion picture quality by reducing
motion blur.
146
All settings
Picture
Advanced picture (2)
J IMENUI > >
Black level
3:2 pulldown
24p Direct in
(3D mode only)
Light/Dark
Off/On/Auto
60Hz/48Hz
•Select Dark when details are washed out in
dark areas of picture from external source. Valid
only for external input signals.
° Reduces motion jitter in film-based content by
transforming 24 fps to 30 fps (non-HDMI).
° 48Hz: Achieves more cinematic playback by
reproducing the movie contents at twice the
speed of 24 frames per second.
147
Altri manuali per DT50 series
2
Indice
Altri manuali Panasonic TV LCD
Panasonic
Panasonic Viera TH-L19X10AK Manuale utente
Panasonic
Panasonic TC-L32E6L Manuale utente
Panasonic
Panasonic Viera TX-L24C3B Manuale utente
Panasonic
Panasonic TX-40CX400 Manuale utente
Panasonic
Panasonic Viera TX-L37G10E Manuale utente
Panasonic
Panasonic TX-26LX500A Manuale utente
Panasonic
Panasonic VIERA TX-42AS650B Manuale utente
Panasonic
Panasonic VIERA TX-L65WT600B Manuale utente
Panasonic
Panasonic viera TC-L37D2M Manuale utente
Panasonic
Panasonic TX-26LX70 Manuale utente
Panasonic
Panasonic TH-L37V10Z Viera Manuale utente
Panasonic
Panasonic Viera TX-40CX802B Manuale utente
Panasonic
Panasonic Viera TH-60C430Z Manuale utente
Panasonic
Panasonic Viera TX-23LX50F Manuale utente
Panasonic
Panasonic Viera TX-36LX70P Manuale utente
Panasonic
Panasonic TCL37U3 - 37" LCD TV Manuale utente
Panasonic
Panasonic Viera TX-L32C20B Manuale utente
Panasonic
Panasonic TX-P42ST60E Manuale utente
Panasonic
Panasonic TC-20LA2 Manuale utente
Panasonic
Panasonic Viera TX-32LXD600 Manuale utente
