Panasonic BL-C30A - Wireless 802.11 b/g Network Camera Guida

How to Use This Documentation

The camera includes the following 3 manual types.

•Installation/Troubleshooting (This manual)

This manual has important information you will need to understand before

installing the camera and troubleshooting tips.

•Getting Started

Getting Started provides explanations for the initial configuration and

accessories included with the camera. TheGettingStarted helps you to easily

configure the camera.

•Operating Instructions (Included on the Setup CD-ROM)

Operating Instructions explains about operations, settings, features and the

cleaning method when using the camera.

Please read this manual before using and save this manual for future

reference.

Panasonic Network Camera Website: http://www.panasonic.com/netcam/ for

customers in the USA or Puerto Rico

Installation/Troubleshooting

Model No. BL-C30A

Network Camera

Installation/Troubleshooting

Abbreviations

•UPnP

TM is the abbreviation for Universal Plug and Play.

• "Network Camera" is called "Camera" in this Installation/Troubleshooting.

Trademarks

• Ethernet is either a registered trademark or a trademark of Xerox Corporation

in the United States and/or other countries.

• Windows and ActiveX are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

• Screen shots reprinted with permission from Microsoft Corporation.

• All other trademarks identified herein are the property of their respective

owners.

Installation/Troubleshooting

Table of Contents

1 Before Using..................................................................4

1.1 IMPORTANT SAFETY INSTRUCTIONS........................................4

1.1.1 FCC and Other Information....................................................................... 5

1.2 Camera Feature Locations.............................................................7

1.2.1 Front View.................................................................................................. 7

1.2.2 Bottom View .............................................................................................. 8

1.2.3 Rear View.................................................................................................. 8

Installation/Troubleshooting

1 Before Using

1.1 IMPORTANT SAFETY INSTRUCTIONS

When using thisunit, basic safety precautions should alwaysbe followed to reduce

the risk of fire, electric shock, or personal injury.

1. Read and understand all instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. After taking away the dust on the lens, wipe the lens with a cotton bud.

6. Do not install near any heat sources such as radiators, heat registers, stoves,

or other devices (including amplifiers) that produce heat.

7. Protect the AC adaptor cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the unit.

8. When you operate the camera, the power outlet should be near the camera

and easily accessible.

9. Do not touch the unit or the AC adaptor during lightning storms.

10.Unplug the unit when unused for long periods of time.

11.Refer all servicing to qualified service personnel. Servicing is required when

the unit hasbeen damaged in any way, such asthe AC adaptorcord or plug is

damaged, the unit does not operate normally, or has been dropped.

12.The camera is intended for indoor use only. Prolonged exposure to direct

sunlight or halogen light may damage CMOS sensor.

SAVE THESE INSTRUCTIONS

Network Camera Memo

Serial Number



(Found on the rear side of the main unit) MAC Address



(Found on the rear side of the main unit)

Name and address of dealer

Date of purchase

For your future reference

Attach your purchase receipt here.

Installation/Troubleshooting

1.1.1 FCC and Other Information

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Some wireless Cameras operate at frequencies that may cause interference to

nearby TVs and VCRs. To minimize or prevent such interference, the base of the

wireless Camera should not be placed near or on top of a TV or VCR. If

interference is experienced, move the wireless Camera further away from the TV

or VCR. This will often reduce or eliminate interference. Operating near 2.4 GHz

electrical appliances may cause interference. Move away from the electrical

appliances.

Environment:

Do not install the camera where the temperature is less than 5 °C (+41 °F) or

greater than +40 °C (+104 °F). Allow 10 cm (4 inches) clearance around the unit

for proper ventilation. Avoid excessive smoke, dust, mechanical vibration, shock,

or direct sunlight.

Routine care:

Wipethe unit with a soft cloth. Donot use benzine,thinner, oranyabrasive powder.

When you leave the unit unused for a long period of time, unplug the AC adaptor

from the outlet.

If you have any problems:

Consult an authorized Panasonic Factory Service Center.

Installation/Troubleshooting

Caution

• To comply with FCC RF exposure requirements in uncontrolled environment:

•This equipment must be installed and operated in accordance with

provided instructions and a minimum 20 cm (8inches) spacing must be

provided between antenna and all person's body (excluding extremities of

hands, wrist and feet) during wireless modes of operation.

• This transmitter must not be co-located or operated in conjunction with

any other antenna or transmitter.

•Medical

Consult the manufacturer of any personal medical devices, such as

pacemakers, to determine if they are adequately shielded from external RF

(radio frequency) energy. (The unit operates in the frequency range of 2400

MHz to 2483.5 MHz, and the power output level is 0.1 watts.) Do not use the

unitin healthcarefacilities if any regulationsposted inthearea instruct younot

to do so. Hospitals or health care facilities may be using equipment that could

be sensitive to external RF (radio frequency) energy.

• Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate this device.

No responsibility will be taken by our company with respect to consequences

resulting from the use, damage or both of the camera.

Installation/Troubleshooting

1.2 Camera Feature Locations

1.2.1 Front View

Privacy Button

To temporarily deactivate the camera, press the privacy button. Once pressed, the

button changes from green to red. The videowill be temporarily turned off, camera

features become unresponsive and the viewed image turns to a gray screen. To

return to normal operation, press the privacy button again. It should turn green

within a few seconds. To restore video, click [Refresh] on the web browser. Privacy

mode can also be controlled from mobile phones or PCs (see page or page of the

Operating Instructions in the Setup CD-ROM).

Indicator Display

Antenna

Pan/tilt Part

Do not apply pressure to the pan/tilt portion of the

camera. Any forced movement can damage the internal

mechanism.

Indicator/Privacy Button

Pyroelectric Infrared Sensor (see Getting Started)

Power



on Normal Operation*1

*1The indicator turns orange if the camera is not connected to the LAN.

*2The indicator blinks orange if the camera is not connected to the LAN.

Updating Firmware

Getting IP address*2

Got IP address

Setting

Finished setting

Not on the LAN Orange Orange blinking

Orange blinking



(The camera restarts after that.)

Pressing FACTORY



DEFAULT RESET button

Orange blinking Turning off

UPnP Failure Orange blinking (About a 2-second interval)

On the LAN

Using



DHCP

Automatic



Setup

In Privacy Mode Red

Internal Failure Red blinking

Orange Green

Green



Orange and green blinking

Green blinking

Installation/Troubleshooting

1.2.2 Bottom View

1.2.3 Rear View

Note

If the ceiling is made of wood, the camera can be installed on the ceiling. See

Panasonic Network Camera support website at http://panasonic.co.jp/pcc/

products/en/netwkcam/ for details.

Ethernet®

(LAN) port

DC IN jack

Tripod Mounting Hole

Used when installing the

camera on a tripod.

Stand Mounting Hole

Used when installing the camera onto a

wooden wall with a stand.

Used when installing



the camera onto



a wooden wall.

Installation/Troubleshooting

Memo

Installation/Troubleshooting

Altri manuali per BL-C30A - Wireless 802.11 b/g Network Camera

Indice

Altri manuali Panasonic Telecamera di sicurezza

Panasonic

Panasonic Super Dynamic III WV-CS950 Manuale utente

Panasonic

Panasonic WV-X6531NEG Manuale utente

Panasonic

Panasonic Super Dynamic III WV-NS202A Manuale utente

Panasonic

Panasonic KX-HCM230 Manuale utente

Panasonic

Panasonic KX-HN7001 Manuale utente

Panasonic

Panasonic WV-CLR920A Manuale utente

Panasonic

Panasonic aw-he40 series Manuale utente

Panasonic

Panasonic Super Dynamic III WV-CW960 Manuale utente

Panasonic

Panasonic III PLUS Manuale utente

Panasonic

Panasonic WV-SW175 Manuale utente

Panasonic

Panasonic AWE350 - COLOR CAMERA Manuale utente

Panasonic

Panasonic VL-CM851BX Manuale utente

Panasonic

Panasonic aw-he40 series Manuale utente

Panasonic

Panasonic Super Dynamic III WV-CS954 Manuale utente

Panasonic

Panasonic GPKS152 - CCD CAMERA Manuale utente

Panasonic

Panasonic WV-SW396 Manuale utente

Panasonic

Panasonic Super Dynamic III WV-CW974 Manuale utente

Panasonic

Panasonic KX-HCM8 - Network Camera - Position Manuale utente

Panasonic

Panasonic BL-C111 Manuale operativo

Panasonic

Panasonic GPUS932CU - 3CCD COLOR CAMERA CCU Manuale utente

Panasonic

Panasonic OneHome BB-HCM331A Manuale utente

Panasonic

Panasonic BL-C210 Series Manuale utente

Panasonic

Panasonic Machine Vision GP-MF130 Manuale utente

Panasonic

Panasonic KX-HNC200FX Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente