Panasonic GP-KR222E Manuale utente

Industrial Colour CCD Camera

GP-KR222E

(Lens : option)

Before attempting to connect or operate this product,

please read these instructions completely.

FRANÇAIS DEUTSCH ENGLISH

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR

BACK), NO USER SERVICEABLE PARTS

INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The serial number of this product may be found on the bot-

tom of the unit.

You should note the serial number of this unit in the space

provided and retain this book as a permanent record of

your purchase to aid identification in the event of theft.

Model No.

Serial No.

The exclamation point within an equilat-

eral triangle is intended to alert the user

to the presence of important operating

and maintenance (servicing) instruc-

tions in the literature accom-panying

the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

ENGLISH VERSION

The lighthing flash with arrowhead sym-

bol, within an equilateral triangle, is

interned to alert the user to the pres-

ence of uninsulated "dangerous volt-

age" within the product's enclosure that

may be of sufficient magnitude to con-

stitute a risk of electric shock to per-

sons.

Dit modelis onderworpen aan de EEG-richtlijn (ter

voor-koming van radio-interferentie) 87/308/EGG.

Denne model opfylder EF direktiv 87/308/EF (for for-

ebyggelse af radiointerferens).

Este modelo cumple con la norma EC (para interfer-

encias de radio 87/308/EEC).

La Società PANASONIC ITALIA S.p.A., importatrice di

questo prodotto, dichiara che questo apprarecchio è

conforme alle disposizioni della direttiva C.E.E./

87/308 (D.M. 13 aprile 1989).

This model conforms of the EC directive (for radio

interference) 87/308/EEC.

This apparatus was produced to BS 800:1987.

CONTENTS

PREFACE ........................................................................................................................................................................ 2

FEATURES ...................................................................................................................................................................... 2

PRECAUTIONS ............................................................................................................................................................... 3

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ......................................................................................... 4

CONNECTION ................................................................................................................................................................ 8

MOUNTING THE LENS ................................................................................................................................................. 10

FLANGE-BACK FOCAL LENGTH ADJUSTMENT ......................................................................................................... 10

PREVENTION OF BLOOMING AND SMEAR ................................................................................................................ 11

SPECIFICATIONS ......................................................................................................................................................... 12

-1-

The model numbers listed in this Operating Instructions have no suffixed attached to it.

ENGLISH

-2-

PREFACE

Panasonic`s Colour Digital Camera GP-KR222 intro-

duce a new level of high picture quality and resolution

through the utilization of a 1/2-inch interline CCD image

sensor having 752 horizontal pixels (picture elements),

and through the use of digital signal processing LSI`s.

High sensitivity is ensured by the use of on-chip micro

lenses on each pixel. In addition, the use of aspherical

high speed lenses further improves sensitivity. High

performance-to-cost ratio is achieved through the

extensive use of newly developed digital LSI`s.

FEATURES

1. Automatic Light Control (ALC)/ Electronic Light

Control (ELC) are built in.

2. Back light Compensation is available.

3. Auto/Manual White Balance Control Function are

provided.

4. Selectable of Soft/Sharp Aperture

5. Signal-to-noise ratio of 50 dB

6. Minimum illumination of 3 lux with F1.4 lenses

7. Minimum illumination of 0.9 lux by using Panasonic

aspherical high speed (F0.75) lenses.

8. 480 lines of horizontal resolution

9. High quality picture :

(a) 2H type vertical enhancer for greater picture

sharpness

(b) Chroma averaging circuit for better colour sig-

nal to noise ratio

(d) Expanded dynamic range by use of knee cir-

cuit signal to noise ratio.

(e) Highlight aperture correction for greater pic-

ture detail of bright object

10. Ability to shoot indoor scenes with fixed iris lens by

use of Electronic Light Control(ELC) function.

11. Backlight compensation for use against unusual

lighting conditions.

PRECAUTIONS

1. Do not attempt to disassemble the camera

To prevent electric shock, do not remove screws

or cover. There are no user-service parts inside.

Refer servicing to qualified service personnel.

2. Handle the camera with care

Do not abuse the camera. Avoid striking or shak-

ing it. The camera could be damaged by improper

handing or storage.

3. Do not expose the camera to rain or moisture,

avoid operation in wet areas.

Do take immediate action if the camera should

become wet. Turn the power off and request ser-

vicing to qualified service personnel. Moisture can

damage the camera and also create the danger of

electric shock.

4. Never aim the camera at the sun

Whether the camera is in use or not, never aim it at

the sun or an extremely bright object laser beam

etc., as this could cause a damage of CCD image

sensor or smear on the picture.

5. Do not operate the camera beyond its

temperature, humidity or power source ratings.

(a) Designed for indoor use

(b) Ambient temperature must not range beyond

−10° C +50° C (14° F + 122° F).

above 90%.

(d) The input power source is 12 V DC, 300mA.

-3-

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

-4-

VIDEO OUT

OFF

ELC

SOFT

OFF

AGC ON

ALC

SHARP

BLC ON

ATW ON

DC 12V IN

GP-

KR222

VIDEO

LEVEL

POWER

S VIDEO OUT

R B

(AWC)

!1 !2 !3 !4

we rt

1. Camera Mounting Screw Hole

This threaded hole (1/4” - 20) is used to mount the

camera onto a mounting bracket or tripod.

2. Flange-back Adjusting Ring

This is used to adjust the back focal length or pic-

ture focus by rotating this ring to clockwise for C-

mount lens or counterclockwise for special C-

mount (CS mount) lens.

CAUTIONS :

1. Always set this ring to fully clockwise before

mounting the lens to prevent damage of inner

glass or CCD image sensor.

2. Do not turn this ring too much to counterclock-

wise when the C-mount lens is mounted as

this could damage the inner glass or CCD

image sensor.

3. Lens (Option)

4. 12 V In Terminal (DC 12V IN)

This terminal accepts 12 V DC power source

(10.8V - 16V)

-5-

5. AGC ON/OFF Switch (AGC ON/OFF)

This switch is used to select the gain of the video

amplifier as follows :

ON: When the lens iris is fully opened at low light

shooting, a clear picture is obtained by auto-

matic increase of the gain.

OFF: A natural and low-noise picture is obtained

under a low light condition.

6. Automatic Light Control/Electronic Light

Control Selection Switch (ELC / ALC)

This switch is used to select the lens as follows.

ALC: Choose this position when using an auto iris

lens.

ELC: Choose this position when using a fixed or

manual iris lens.

7. Detail Level Selection Switch (SOFT/SHARP)

The detail/aperture level can be selected by this

switch. Set this switch to the desired position while

observing the picture on the monitor.

Note: The aperture is cut off at SOFT position.

-6-

8. Back Light Compensation On/Off Switch (BLC

ON/OFF)

When back light affects the picture, set this switch

to the ON position for a clear picture.

9. Automatic Tracing White Balance Control

On/Off Switch (ATW, ON/OFF(AWC))

The white balance setting can be selected as ;

ON: The white balance is automatically and con-

tinuously set by detecting the characteristic /

colour temperature of light source through the

lens and controlling the gain of red and blue

signal even if the characteristic / colour tem-

perature varies.

Note: The white balance setting is effected by the

setting level of the ATW Control (11). (The

bluish white is obtained when the ATW Control

has been set to the B side.

OFF: The white balance is automatically set and

fixed with the condition switched to the AWC

from ATW. When the characteristic/colour

temperature of light source changes, set this

switch to the ATW ON position then set it back

OFF.

Note: The white balance setting is effected by the

setting level of the ATW Control (11). (The

bluish white is obtained when the ATW Control

has been set to the B side.

10. Power Indicator (POWER)

11. ATW Control (ATW ON, R/B)

This control adjusts the level of red and blue

colour balance even if the ATW ON/OFF Switch (9)

is set to any position. It is preset at the centre posi-

tion which usually provides accurate colour repro-

duction.

12. Video Level Control (VIDEO LEVEL, L/H)

This control adjusts the level of auto iris control

when the ELC/ALC Selection switch (6) is set to

the ALC position, or the level of electric light con-

trol when the selection switch (6) is set to the ELC

position.

Note: This control does not work in the following

conditions

• AGC ON/OFF Switch (5) is set to OFF with the

manual or fixed lens.

• AGC gain reaches the maximum level when

setting the AGC ON/OFF Switch (5) to ON.

13. S-Video Output Connector (S-VIDEO OUT)

The luminance (Y) and chroma (C) signals for

monitor are provided at this connector.

14. Video Output Connector (VIDEO OUT)

A 1.0 Vp-p / 75 ohms composite video signal is

provided at this connector.

-7-

ELC (Electronic Light Control)/BLC (Back Light

Compensation) Description

1. ELC (Electronic Light Control)

In this mode a continuously variable electronic

shutter is employed to automatically control expo-

sure times in the CCD Image Sensor, according to

the incoming light level. When this mode is select-

ed, fixed or manual iris lens can be used instead

of an ALC type lens.

Caution :

1. Under bright conditions such as outdoors, use

an ALC type lens as the ELC control range is

not wide enough under these conditions.

2. Under certain unique lighting conditions, the

following may appear :

• strong smear and/or blooming on high light

objects such as spot lights or windows.

• noticeable flicker in the picture and/or the

colour rendition variations.

• periodic variance of white balance

Should these phenomena occur, use an ALC lens.

2. BLC (Back Light Compensation)

ON OFF

When strong, unwanted background lighting inter-

feres with the clarity of important scene objects,

turn the Back Light Compensation On/Off Switch

(8) to the “ON” position.

Caution :

Setting this switch to the “BLC OFF” position

is recommended in the use with the pan/tilt

head or in the object having the rapid change

illumination since the speed of lens iris

becomes slow in the “BLC ON” position.

CONNECTION

1. A power supply of 12V DC is required.

2. Connect the power cable to the 12V DC Power

Terminal on the rear panel of the camera.

Copper wire #24 #22 #20 #18

size (AWG) (0.22mm2) (0.33mm2) (0.52mm2) (0.83mm2)

Resistance 0.257 0.165 0.099 0.059

ohms/ft

Resistance 0.078 0.050 0.030 0.018

ohms/m

Resistance of copper wire [at 20°C (68°F)]

12 VDC

(10.5 V - 16 V)

−+

• Calculation method of maximum cable length

between camera and power supply.

10.5V DC ≤VA−(R x 0.42 x L) ≤16V DC

L : Cable length (meter)

R : Resistance of copper wire (ohms/meter)

VA: DC output voltage of power supply unit

VA−12

L standard = (meter)

0.42 x R

VA−16

L minimum = (meter)

0.42 x R

VA−10.5

L maximum = (meter)

0.42 x R

-8-

Indice

Lingue:

Altri manuali Panasonic Telecamera di sicurezza

Panasonic

Panasonic BB-HCM311 Manuale utente

Panasonic

Panasonic AW-UN70WPC Manuale utente

Panasonic

Panasonic RS-485 Guida rapida

Panasonic

Panasonic AW-HE38HWP Manuale utente

Panasonic

Panasonic KX-HNC850 Manuale utente

Panasonic

Panasonic BL-VT164 Series Manuale utente

Panasonic

Panasonic i-pro WV-NP1004 Manuale utente

Panasonic

Panasonic GPUS522HA - IND CCD CAMERA Manuale utente

Panasonic

Panasonic AGDVC15 - DV CAMCORDER Manuale utente

Panasonic

Panasonic AWE350 - COLOR CAMERA Manuale utente

Panasonic

Panasonic WV-BP102 Manuale utente

Panasonic

Panasonic WV-CF634E Manuale utente

Panasonic

Panasonic WV-SW598 Manuale utente

Panasonic

Panasonic WV-CF102E Manuale utente

Panasonic

Panasonic WV-CP310 Manuale utente

Panasonic

Panasonic AW-UE70KP Manuale utente

Panasonic

Panasonic WV-CF400 Manuale utente

Panasonic

Panasonic aw-he40 series Manuale utente

Panasonic

Panasonic Super Dynamic III WV-CW384 Manuale utente

Panasonic

Panasonic BL-C131 Manuale utente

Panasonic

Panasonic BB-HNP15 Manuale operativo

Panasonic

Panasonic WV-S2131LPJ Manuale utente

Panasonic

Panasonic WV-CP300 Series Manuale utente

Panasonic

Panasonic EggCam GP-KR001 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente