Panasonic WV-NF284 - i-Pro Network Camera Manuale utente

INSERT

ADJUST

LOCK

VER

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

No model number suffix is shown in this manual.

Network Camera

Network Operating Instructions

Model No. WV-NF284

CONTENTS

Preface ............................................................................................................................ 3

About these operating instructions .............................................................................. 3

Trademarks and Registered Trademarks ................................................................... 3

Viewer Software .......................................................................................................... 3

Monitor Images on a PC .................................................................................................. 4

Monitor images from a single camera ......................................................................... 4

Monitor images from multiple cameras ....................................................................... 7

Action at an Alarm Occurrence ....................................................................................... 8

Transmit Images onto an FTP Server ............................................................................. 9

Transmit an alarm image at an alarm occurrence

(Alarm image FTP transmission) ................................................................................. 9

Transmit images at a designated interval or period (FTP periodic transmission) ....... 9

Save images on the SD memory card when failed to transmit images by the

FTP periodic transmission function ............................................................................. 10

About the network security of this unit ............................................................................. 12

Equipped security functions ........................................................................................ 12

Display the Setup Menu and Configure the Settings of the Camera using a PC ............ 13

How to display the setup menu ................................................................................... 13

How to operate the setup menu .................................................................................. 14

Configure the basic settings of the camera [Basic setup] ........................................... 17

Configure the settings relating to images and audio [Camera setup] ......................... 21

Configure the multi-screen settings [Multi-screen setup] ............................................ 26

Configure the alarm settings [Alarm setup] ................................................................. 27

Configure the settings relating to the authentication [Authentication setup] ............... 34

Configure the settings of the servers [Server setup] ................................................... 36

Configuring the network settings [Network setup] ....................................................... 38

Maintenance of the camera [Maintenance] ................................................................. 46

About the Displayed System Log .................................................................................... 49

Troubleshooting ............................................................................................................... 51

Preface

About these operating instructions

There are 2 sets of operating instructions for the WV-NF284 as follows.

•Installation Guide

•Network operating instructions

These network operating instructions contain descriptions of how to operate this product using a PC via a network

and of how to configure the settings.

Refer to the installation guide for descriptions of how to install this product and of how to connect to a network.

Adobe®Reader is required to read PDF. When the Adobe®Reader is not installed on the PC, download the latest

Adobe®Reader from the Adobe web site and install it.

Trademarks and Registered Trademarks

•Microsoft, Windows, Internet Explorer, ActiveX and DirectX are either registered trademarks or trademarks of

Microsoft Corporation in the United States and/or other countries.

•Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United

States and/or other countries.

•SD logo is a trademark.

•Other names of companies and product contained in these operating instructions may be trademarks or regis-

tered trademarks of their respective owners.

Viewer Software

•Images will not be displayed when the viewer software "Network camera View3" is not installed on the PC. Install

the viewer software from the provided CD-ROM.

•The viewer software used on each PC should be licensed individually. Refer to your dealer for the software

licensing.

Monitor Images on a PC

Notes:

•When "ON" is selected for "User Authentication"

(☞page 34), the authentication window will be dis-

played before displaying live images for the user

name and password entries. The default user name

and password are as follows.

User name: admin

Password: 12345

When accessing the camera without changing the

default password, the pop-up window saying that it

is recommended to change the password will be dis-

played.

To enhance the security, change the password for

the user "admin". It is recommended to change this

password periodically.

•Maximum concurrent access to the camera will be

limited to up to 8 users in the following case.

•When "Unicast port (AUTO)" is selected for

"Transmission type" (☞page 22)

•When "Unicast port (MANUAL)" is selected for

"Transmission type" (☞page 22)

•When JPEG images are being transmitted from

the camera

Depending on the set values for "Total bit rate" and

"Max bit rate (per 1 client)", the maximum concurrent

access number may be less than 8 users. When 8

users have been concurrently accessing already, the

access limit message will be displayed for users who

accessed subsequently.

•When "ON" is selected for "MPEG-4 transmission"

(☞page 22), an MPEG-4 image will be displayed.

When "OFF" is selected, a JPEG image will be dis-

played. It is possible to display JPEG image even

when "ON" is selected for "MPEG-4 transmission".

In this case, the refresh interval will be limited.

•When "ON" is selected for "MPEG-4 transmission"

JPEG (VGA): 5 fps

JPEG (QVGA): 10 fps

•When "OFF" is selected for "MPEG-4 transmission"

JPEG (VGA or QVGA): 30 fps

The refresh interval may be longer depending on a net-

work environment, PC spec, photographic subject,

access traffic, etc.

Step 1

Start up the web browser.

Step 2

Enter the IP address designated using the Panasonic IP

setup software in the address box of the browser.

Example: http://192.168.0.10/

Important:

•When the HTTP port number is changed from "80",

enter "http://IP address of the camera +: (colon) +

port number" in the address box of the browser, for

example, "http://192.168.0.11:8080".

•Configure the web browser to not use the proxy

server.

Step 3

Press the [Enter] key on the keyboard.

→The "Live" page will be displayed.

The following are descriptions of how to monitor images from the camera on a PC.

Monitor images from a single camera

About the "Live" page

q[Setup] button (*1)

Click this button to display the setup menu. The but-

ton will turn green and the setup menu will be dis-

played.

w[Live] button

Click this button to display the "Live" page. The but-

ton will turn green and the "Live" page will be dis-

played.

eMulti-screen buttons

Images from multiple cameras can be displayed on

a multi-screen by registering cameras on the setup

menu. (☞page 7)

rImage type buttons

:The letters "MPEG-4" on the button will

turn green and an MPEG-4 image will be

displayed. When "OFF" is selected for

"MPEG-4 transmission" on the setup

menu, the [MPEG-4] button will not be dis-

played. (☞page 22)

:The letters "JPEG" on the button will turn

green and JPEG image will be displayed.

w[Live] button

eMulti-screen buttons

q[Setup] button

tImage capture size buttons

yZOOM buttons

uBrightness buttons

iAUX buttons

rImage type buttons

oCamera name

!0 Alarm occurrence indication button

!2 One shot button

!3 Audio button

!1 Full screen button

!5 Main area

!4 Time and date

Important:

•When displaying multiple MPEG-4 images on a PC,

images may not be displayed depending on the per-

formance of the PC.

•When "ON" is selected for "VMD alarm" (☞page

27), the frame rate of MPEG-4 images will become

15 fps at a maximum.

Refer to this page for further information about the

"Live" page.

tImage capture size buttons

These buttons will be displayed only when a JPEG

image is displayed.

:The letters "VGA" on the button will turn

green and images will be displayed in VGA

size.

:The letters "QVGA" on the button will turn

green and images will be displayed in

QVGA size.

yZOOM buttons (*2)

:The zoomed image will be zoomed out.

(Image displayed in the original size cannot be

zoomed out.)

:The zoomed image will return to the original

size.

:The displayed image will be zoomed in.

Note:

When "ON" is selected for "VMD alarm" (☞page

27), the displayed images will not be zoomed in.

uBrightness buttons (*2)

:The displayed image will be darker.

:The adjusted brightness will return to the

default brightness. (☞page 24)

:The displayed image will be brighter.

iAUX buttons (*2)

:The AUX connector will open.

:The AUX connector will close.

oCamera name

The set camera name will be displayed.

!0 Alarm occurrence indication button (*2)

This button will be displayed and will blink when an

alarm occurred. When the button is clicked, the but-

ton will disappear and the alarm output connector

will be reset. (☞page 29)

!1 Full screen button

Images will be displayed on a full screen. To return

to the "Live" page, press the [Esc] key or the [F5]

key, or the combination of the [Alt] key and the [F4]

key on the keyboard.

!2 One shot button

Click this button to take a picture (a still picture). The

picture will be displayed on a newly opened window.

When right-clicking on the displayed image, the pop-

up menu will be displayed. The displayed image can

be saved on the PC by selecting "Save" from the

pop-up menu.

!3 Audio button

The [Audio] button will be displayed only when "ON"

is selected for "Mic mode" on the setup menu.

(☞page 25)

When this button is clicked, the button will turn into

the button and audio will not be heard.

!4 Time and date

Current time will be displayed in the set date/time

display format (☞page 17).

!5 Main area

Images from the camera will be displayed in this

area.

*1 Operable by only users whose access level is "1.

Administrator"

*2 Only operable by users whose access level is "1.

Administrator" or "2. Camera control" when "ON" is

selected for "User authentication" (☞page 34).

Refer to page 34 for further information about the

access level.

Monitor images from multiple cameras

Images from multiple cameras can be displayed on a multi-screen. Images from up to 4 cameras can be displayed

simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance. 4 cameras can

be registered as a group and up to 2 groups (8 cameras) can be registered. (☞page 26)

Important:

•Select "OFF" for both the user authentication and the host authentication of the camera to be registered.

(☞pages 34 and 35)

•Only JPEG images can be displayed on a multi-screen. Audio will not be heard.

•When the power is turned off or the LAN cable is disconnected while displaying images, displaying images on a

multi-screen from the "Live" page will become unavailable.

Step 1

Click the [Multi-screen] button.

→Images from the registered cameras will be dis-

played on a 4-split screen.

qTo display images on a single screen, click the [Live]

button.

wClick a camera title. Live images from the camera

corresponding to the clicked camera title will be dis-

played on the "Live" page of the newly opened win-

dow.

Action at an Alarm Occurrence

The alarm action will be performed when the following alarm occur.

Alarm type

Terminal alarm: When connecting an alarm device such as a sensor to the alarm connector on the mounting

side of the camera, the alarm action will be performed when the connected alarm device activated.

VMD alarm: When a motion is detected in the set VMD area, the alarm action will be performed.

* VMD stands for "Video Motion Detection".

Command alarm: When a Panasonic alarm protocol (☞page 27) is received from the connected device via a

network, the alarm action will be performed.

Action at an Alarm Occurrence

Display the [Alarm occurrence indication] button on the "Live" page (☞page 5)

The [Alarm occurrence indication] button will be displayed on the "Live" page at an alarm occurrence.

Note:

The [Alarm occurrence indication] button will be refreshed in 30 seconds intervals. For this reason, it may take a

maximum of 30 seconds until the [Alarm occurrence indication] button is displayed on the "Live" page at an alarm

occurrence.

Notify of alarm occurrences to the device connected to the alarm connector

It is possible to output signals from the alarm connector on the mounting side of the camera and sound the buzzer

when an alarm occurs. The settings for the alarm output can be configured on the [Alarm] tab of the "Alarm setup"

page. (☞page 29)

Transmit an image onto a server automatically

An alarm image can be transmitted at an alarm occurrence to the server designated in advance.

The settings required to transmit an alarm image to a server can be configured in the "Alarm image setup" section of

the [Alarm] tab of the "Alarm setup" page (☞page 28) and the [FTP] tab of the "Server setup" page (☞page 37).

Notify of alarm occurrences by e-mail

Alarm mail (alarm occurrence notification) can be sent at an alarm occurrence to the e-mail addresses registered in

advance. Up to 4 addresses can be registered as recipients of the alarm mail. An alarm image (still picture) can be

sent with the alarm mail as an attached file. The settings for alarm mail can be configured in the "E-mail notification

setup" section of the [Notification] tab of the "Alarm setup" page (☞page 32) and the [Mail] tab of the "Server setup"

page (☞page 36).

Notify of alarm occurrences to the designated IP addresses (Panasonic alarm protocol)

This function is available only when Panasonic device, such as the network disk recorder, is connected to the sys-

tem. When "ON" is selected for "Panasonic alarm protocol", the connected Panasonic device will be notified that the

camera is in the alarm state. The settings for Panasonic alarm protocol can be configured on the [Notification] tab of

the "Alarm setup" page. (☞page 33)

Transmit Images onto an FTP Server

Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured

at an alarm occurrence or captured at a designated interval to an FTP server will become available.

Important:

When using this function, set the user name and password to restrict users who can log into the FTP server.

Transmit an alarm image at an alarm occurrence (Alarm image

FTP transmission)

An alarm image can be transmitted at an alarm occurrence to the FTP server. To transmit alarm images to an FTP

server, it is necessary to configure the settings in advance.

The settings for the FTP server can be configured on the [FTP] tab of the "Server setup" page. (☞page 37)

The alarm image FTP transmission function can be turned on/off on the [Alarm] tab of the "Alarm setup" page.

(☞page 28)

Note:

Depending on the network traffic, number of the transmitted images may not reach the set number of images to

be transmitted.

Transmit images at a designated interval or period (FTP periodic

transmission)

Images can be transmitted at a designated interval or period. To transmit images at a designate interval or period, it

is necessary to configure the settings in advance.

The settings for the FTP server to which images are to be transmitted can be configured on the [FTP] tab of the

"Server setup" page. (☞page 37)

On the [FTP] tab of the "Network setup" page, the FTP periodic transmission function can be turned on/off, and the

settings relating to schedules (periods) can be configured. (☞page 43 - 45)

Notes:

•Depending on the network line speed or the network traffic, images may not be transmitted at the exact designat-

ed interval or period.

•When "ON" is selected for both of the alarm image FTP transmission function and the FTP periodic transmission

function, the alarm image FTP transmission function will be given priority over the FTP periodic transmission

function. For this reason, images may not be transmitted at the exact designated interval or period if alarms

occur frequently.

Save images on the SD memory card when failed to transmit

images by the FTP periodic transmission function

Images that have failed to transmit using the FTP periodic transmission can be saved automatically on the SD mem-

ory card. To obtain the images saved on the SD memory card, use the Windows command prompt or FTP client

software. The obtained images can be browsed on a PC.

*When using the "SD memory REC" function of a Panasonic’s network disk recorder, select "OFF" for the "FTP

periodic transmission" function. (☞page 43)

*When using the DHCP function, images will not be saved on the SD memory card until an IP address is assigned

to the camera.

*We make no guarantee for any damages of files on the SD memory card incurred by malfunction or error occur-

rence in files saved on the SD memory card regardless of what the cause may be.

Save images on the SD memory card

By configuring the following settings, saving images which had been failed to transmit to the FTP server using the

FTP periodic transmission function will become available.

About SD memory card: Use (☞page 19)

File name: With time and date (☞page 43)

Obtain images on the SD memory card

Step 1

Access the camera using the Windows command prompt or FTP client software.

→The window with the user name and password entry fields will be displayed.

Step 2

Enter the user name whose access level is "1. Administrator" and its password.

→Log in the camera.

Note:

The default user name with the access level "1. Administrator" and its password are as follows.

User name: admin

Password: 12345

To enhance the security, it is recommended to change the password for the administrator periodically.

Altri manuali per WV-NF284 - i-Pro Network Camera

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Panasonic Telecamera di sicurezza

Panasonic

Panasonic WVCL920 - COLOR CAMERA Manuale utente

Panasonic

Panasonic WVCW244F - COLOR CAMERA Manuale utente

Panasonic

Panasonic WV-SF438 Manuale utente

Panasonic

Panasonic Super Dynamic III WV-CW964 Manuale utente

Panasonic

Panasonic WVBP330 - B/W CCTV CAMERA Manuale utente

Panasonic

Panasonic VIDEOLARM PCF3 Foglio di istruzioni

Panasonic

Panasonic BB-HCM381A - Network Camera Manuale utente

Panasonic

Panasonic WV-SW559 Manuale utente

Panasonic

Panasonic Super Dynamic III WV-CP480 Manuale utente

Panasonic

Panasonic BL-C111A - Network Camera - Pan Manuale utente

Panasonic

Panasonic WV-CF224 Manuale utente

Panasonic

Panasonic WV-BF320 Manuale utente

Panasonic

Panasonic BB-HCM531A - Network Camera Manuale utente

Panasonic

Panasonic GP-US932CA Manuale utente

Panasonic

Panasonic WV-NW484S - i-Pro Network Camera Guida utente

Panasonic

Panasonic WVNP1000 - NETWORK CAMERA Manuale utente

Panasonic

Panasonic GPMS112 - IND CCD CAMERA Manuale utente

Panasonic

Panasonic AW-HEA10WPJ Manuale utente

Panasonic

Panasonic BL-C140 Manuale utente

Panasonic

Panasonic WV-CW474A Manuale utente

Panasonic

Panasonic WV-CW970 Manuale utente

Panasonic

Panasonic WV-SFV481 Manuale utente

Panasonic

Panasonic WV-SW550 Series Manuale utente

Panasonic

Panasonic VIDEOLARM PCF1 Foglio di istruzioni

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente