Panasonic SA-PM19E Manuale utente

ORDERNO. MD0403117C2

CD Stereo System

SA-PM19E / SA-PM19EB / SA-PM19EG

Colour

(S)... Silver Type

(K)... Black Type (For Eonly)

SPECIFICATIONS

Specification

Amplifier Section

RMS Power output

10%Total harmonicdistortion

1kHz, bothchannelsdriven

(Lowchannel) 35 Wper channel (6)

8kHz, bothchannelsdriven

(High channel) 35 Wper channel (6)

Total Bi-Amppower 70 Wper channel

Output Impedance

Headphone 16 - 32

FM Tuner Section

Frequencyrange 87.50 - 108.00 MHz (50 kHz

steps)

Sensitivity 1.5V (IHF)

S/N 26 dB 1.5V

Antennaterminal(s) 75 (unbalanced)

AM Tuner Section

Frequencyrange 522 kHz - 1629 kHz (9kHz

steps)

520 kHz - 1630 kHz (10 kHz

steps)

Sensitivity

S/N 20 dB (at 999 kHz) 560 V/m

CassetteDeck Section

Track system 4 track, 2channel

Heads

Record/playback Solidpermalloyhead

Erasure Doublegapferritehead

Motor DC servomotor

Recording system AC bias 100 kHz

Erasing system AC erase 100 kHz

Tapespeed 4.8cm/s

Overall frequencyresponse (+3dB, -6dB at Deck Out)

Normal (TypeI) 35 Hz - 14 kHz

S/N RATIO 45 dB (Aweighted)

Wowand flutter 0.10%(WRMS)

Fast forwardand rewind times Approx. 120 secondswithC-

60 cassettetape

CD Section

Disc

CD, CD-R, CD-RW, MP3 8cm/12 cm

Sampling frequency 44.1kHz

Decoding 16 bit linear

Pickup

Beam source/ Wavelength Semiconductorlaser / 780

Number of channels Stereo

Number

channels

Stereo

Frequencyresponse 20 Hz - 20 kHz (+1dB, -2dB)

Wowand flutter Belowmeasurablelimit

Digital filter 8 fs

D/Aconverter MASH (1bit DAC)

MP3

Bit rate 32kbps-320kbps

Sampling frequency 32kHz, 44.1kHz, 48kHz

General

Power supply AC 230 V, 50 Hz (E, EG)

AC 230 V - 240 V, 50 Hz (EB)

Power consumption 130 W

Dimensions(WxH xD) 179 x250 x383 mm

Mass 5.24 kg

Power consumption instandby

mode: 0.8W

System: SC-PM19E-S MusicCenter: SA-PM19E-S

Speaker: SB-PM19E-M

System: SC-PM19EB-S MusicCenter: SA-PM19EB-S

Speaker: SB-PM19E-M

System: SC-PM19EG-S MusicCenter: SA-PM19EG-S

Speaker: SB-PM19EG-M

System: SC-PM19E-K MusicCenter: SA-PM19E-S

Speaker: SB-PM19P-K

Notes:

1. Specificationsaresubject to changewithoutnotice. / Mass and

dimensionsareapproximate.

2. Total harmonicdistortion ismeasured bythedigital spectrum

analyzer.

3. Thelabels“HIGH” and “LOW” on therear ofthespeakersrefer to

High frequencyand Lowfrequency.

2004 PanasonicAVCNetworks Singapore Pte. Ltd. All rights

reserved. Unauthorized copying and distribution isaviolation of

law.

1. Caution for AC Mains Lead

2. Before Repair and Adjustment

Disconnect AC power, discharge PowerSupplyCapacitors C506, C507, C508, C584 & C311

through a 10 , 5W resistortoground.

DO NOTSHORT-CIRCUITDIRECTLY (witha screwdriverblade, forinstance), as this may

destroysolidstate devices.

Afterrepairs are completed, restore powergraduallyusing a variac, toavoidovercurrent.

-Current consumption at AC 230V, 50 HzinNO SIGNALmode

shouldbe ~300 mA. (For E, EG)

-Current consumption at AC 230V -240V, 50 HzinNO SIGNALmode

shouldbe ~300 mA. (For EB)

3. Protection Circuitry

The protection circuitrymayhave operatedif eitherof the following conditions are noticed:

-Nosound isheard when the power isturned on.

-Sound stops during aperformance.

The function of this circuitryis toprevent circuitrydamage if, forexample, the positive and

negative speakerconnection wires are "shorted", orif speakersystems withanimpedance less

thanthe indicatedratedimpedance of the amplifierare used.

If this occurs, followthe procedure outlines below:

1. Turn off the power.

2. Determine the cause of the problem and correct it.

3. Turn on the power once againafter one minute.

Note:

Whenthe protection circuitryfunctions, the unit will not operate unless the poweris first turned

off and thenon again.

4. Handling the Lead-free Solder

4.1. About lead free solder (PbF)

Distinction of PbF P.C.B.:

P.C.B.s (manufactured) using leadfree solderwill have a PbF stampon the P.C.B.

Caution:

-Pb free solder has ahigher melting point than standard solder;

Typicallythe melting point is50 -70°F (30 -40°C)higher. Please

use ahigh temperature soldering iron. Incase of soldering iron

with temperature control, please set itto 700 ± 20°F (370 ± 10°C).

-Pb free solder will tend to splash when heated too high (about

1100°F/600°C).

-When soldering or unsoldering, please completelyremove all of

the solder on the pins or solder area, and be sure to heat the

soldering points with the Pb free solder until itmelts enough.

5. Precaution of Laser Diode

Caution :

Thisproduct utilizes alaser diode with the unitturned "ON",

invisiblelaser radiation isemitted from the pick up lens. /

Wavelength :780 nm / Maximum output radiation power from pick

up :100 W/VDE/ Laser radiation from pick up unitissafetylevel,

but be sure the followings:

1. Donot disassemblethe optical pick up unit, since radiation from

exposed laser diode isdangerous.

2. Donot adjust the variableresistor on the pick up unit. Itwas

alreadyadjusted.

3. Donot look at the focus lens using optical instruments.

4. Recommend not to look at pick up lens for along time.

ACHTUNG :

Dieses Produkt enthälteine Laserdiode. Imeingeschalteten

Zustand wird unsichtbare Laserstrahlung von der Lasereinheit

abgestrahlt. / Wellenlänge :780nm / MaximaleStrahlungsleistung

der Lasereinheit:100 W/VDE/ DieStrahlung an der Lasereinheit

ist ungefährlich, wenn folgende Punkte beachtet werden:

1. DieLasereinheitnicht zerlegen, da dieStrahlung an der

freigelegten Laserdiode gefährlich ist.

2. Den werkseitigjustierten Einstellregler der Lasereinhitnicht

verstellen.

3. Nicht mitoptischen Instrumenten indieFokussierlinse blicken.

4. Nicht über längere ZeitindieFokussierlinse blicken.

ADVARSEL:

I dette aapparat anvendes laser.

CAUTION!

THIS PRODUCTUTILIZES A LASER.

USE OFCONTROLS OR ADJUSTMENTS OR PERFORMANCE OFPROCEDURES OTHER THAN

THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

Use of Caution Labels

6. Handling Precautions For Traverse Deck

The laserdiode inthe traverse deck (optical pickup) maybreak downdue topotential difference

causedbystatic electricityof clothes orhumanbody.

So, be careful of electrostatic breakdownduring repairof the traverse deck (optical pickup).

Handling of CD traverse deck (optical pickup)

1. Donot subject the traverse deck (optical pickup) to static

electricityas itisextremelysensitive to electrical shock.

2. The short land between the No.4(LD)and No.5(GND)pins on the

flexibleboard (FFC)isshorted with asolder build-up to prevent

damage to the laser diode (Fig1).

3. Take care not to applyexcessive stress to the flexibleboard (FPC

board).

4. Donot turn the variableresistor (laser power adjustment). Ithas

alreadybeen adjusted.

Fig1

Grounding forelectrostatic breakdownprevention

1. Human bodygrounding (Fig2)

Use the anti-staticwrist strap to discharge the staticelectricity

from your body.

2. Work tablegrounding (Fig2)

Put aconductive material (sheet) or steel sheet on the area where

the traverse deck (optical pickup) isplaced, and ground the sheet.

Caution :

The staticelectricityof your clothes will not be grounded through

the wrist strap. So, take care not to let your clothes touch the

traverse deck (optical pickup). Fig2

Caution whenReplacing the Optical Pickup :

The traverse has ashort point shorted with solder to protect the

laser diode against electrostatics breakdown. Besure to remove

the solder from the short point before making connections.

7. Accessories

Note : RefertoPacking Materials & Accessories forpart number.

AC mains lead(ForEB only)

ACmains lead(ForE & EG only)

FM indoorantenna

AM loop antenna

Remote control transmitter

Antenna plug adaptor(ForEB only)

8. Operation Procedures

9. Assembling and Disassembling

9.1. Disassemblyflow chart

The following chart is the procedure fordisassembling the casing and inside parts forinternal

inspection whencarrying out the servicing.

To assemble the unit, reverse the steps showninthe chart below.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Panasonic Impianto stereo

Panasonic

Panasonic SA-AK110P Manuale utente

Panasonic

Panasonic SAAK18 - MINI HES W/CD-PLAYER Manuale utente

Panasonic

Panasonic SA-PT760P Manuale utente

Panasonic

Panasonic SA-AK230PL Manuale utente

Panasonic

Panasonic SC-PM250 Manuale utente

Panasonic

Panasonic SC-AK200 Manuale utente

Panasonic

Panasonic SC-HC27 Manuale utente

Panasonic

Panasonic SCAK20 - MINI HES W/CD-P Manuale utente

Panasonic

Panasonic SC-PM37MD Manuale utente

Panasonic

Panasonic SC-PMX90 Manuale utente

Panasonic

Panasonic SA-PM24EB Manuale utente

Panasonic

Panasonic RXD13 - RADIO CASS. W/CD-LOW Manuale utente

Panasonic

Panasonic SCAK450 - CD STEREO SYSTEM Manuale utente

Panasonic

Panasonic SA-NC9GCP Manuale utente

Panasonic

Panasonic SA-AKX36PH Manuale utente

Panasonic

Panasonic SC-AK45 Manuale utente

Panasonic

Panasonic SC-HC58DB Manuale utente

Panasonic

Panasonic RX-C20 Manuale utente

Panasonic

Panasonic SC-PMX70B Manuale utente

Panasonic

Panasonic SAAK47 - MINI HES W/CD-PLAYER Manuale utente

Panasonic

Panasonic SCAK20 - MINI HES W/CD-P Manuale utente

Panasonic

Panasonic SC-AK270 Manuale utente

Panasonic

Panasonic SA-NC9GCP Manuale utente

Panasonic

Panasonic SC-HC38 Manuale utente

Manuali Impianto stereo popolari di altre marche

LG CM3330B Manuale utente

Sony

Sony SS-CEP50 Manuale utente

Cetacea Sound

Cetacea Sound CVS-II Manuale utente

Aiwa

Aiwa XR-H66MD Manuale utente

Denon

Denon UCD-250 Manuale utente

Sanyo

Sanyo DC-MX41i Manuale utente

Sharp

Sharp CD-ES600V Manuale utente

Exibel

Exibel BDX600-UK Manuale utente

Sanyo

Sanyo DC-F320 Manuale utente

Philips

Philips FWM583X Manuale utente

Sharp

Sharp CD-C462 Manuale utente

Onkyo

Onkyo CBX 300 - CD / MP3 Clock Radio Manuale utente

Aiwa

Aiwa XR-EM70 Manuale utente

Cyrus

Cyrus Lyric Manuale utente

Philips

Philips MCM159/98 Manuale utente

Philips/Magnavox

Philips/Magnavox Magnavox FW 62C Manuale utente

RCA

RCA RS3965SB Manuale utente

Sharp

Sharp XL-UH240 Manuale utente