Panasonic NV-SD440EG/ Manuale utente

Service Manual

TOP NEXT

ORDER NO. VRD9906016C2

Video Cassette Recorder

NV-SD440EG/NV-SD440B/NV-SD440BL

Z-MECHANISM

file:///C|/___________/SVC/s0000000000.html (1 of 2) [23/09/2005 16:27:33]

•@

TOP NEXT

file:///C|/___________/SVC/s0000000000.html (2 of 2) [23/09/2005 16:27:33]

Table Of Contents
COVER
INTRODUCTION
GENERAL DESCRIPTIONS
1 SERVICE INFORMATION
1.1 CHANNEL MEMORY IC INITIALIZATION
1.2 CHECKING OF MAIN C.B.A.
1.3 CYLINDER UNIT REPLACEMENT
1.4 FLAT CARD CABLE INSTALLATION
2 REMOVAL OF CASSETTE TAPE
3 CAUTION FOR AC MAINS LEAD (NV-SD440B/BL)
4 INTRODUCTION OF VIDEO HEAD CLEANING CASSETTE (POLISHING TYPE)
OPERATING INSTRUCTIONS
ADJUSTMENT PROCEDURES
1 DISASSEMBLY METHOD
1.1 DISASSEMBLY FLOW CHART
1.2 DETAIL OF DISASSEMBLY METHOD
2 MECHANICAL ADJUSTMENT PROCEDURES
3 ELECTRICAL ADJUSTMENT PROCEDURES
3.1 TEST EQUIPMENT
3.2 VCR SETTING
3.3 ADJUSTMENTS
3.4 PG SHIFTER ADJUSTMENT(AUTOMATIC)
3.5 AI FUNCTION ADJUSTMENT(AUTOMATIC)
3.6 LOCATION OF TEST POINTS& CONTROLS
3.7 CIRCUIT BOARD LAYOUT
ABBREVIATIONS
INPUT/OUTPUT CHART
1 INPUT/OUTPUT CHART FOR IC6001
2 TRUTH TABLE (EG MODEL)
3 TRUTH TABLE (B/BL MODEL)
WAVEFORM TABLE
BLOCK DIAGRAMS
file:///C|/___________/SVC/sd440eg.html (1 of 2) [23/09/2005 16:27:41]

1 SYSTEM CONTROL& SERVO BLOCK DIAGRAM
2 LUMINANCE& CHROMINANCE BLOCK DIAGRAM
SCHEMATIC DIAGRAMS
1 POWER SCHEMATIC DIAGRAM
2 POWER SUPPLY/RF SECTION IN MAIN SCHEMATIC DIAGRAM
3 TIMER SECTION IN MAIN SCHEMATIC DIAGRAM
4 SYSTEM CONTROL& SERVO SECTION IN MAIN SCHEMATIC DIAGRAM
5 CAPSTAN UNIT SCHEMATIC DIAGRAM
6 LUMINANCE& CHROMINANCE/AUDIO SECTION IN MAIN SCHEMATIC DIAGRAM
7 INPUT/OUTPUT SECTION IN MAIN SCHEMATIC DIAGRAM
8 HEAD AMP SCHEMATIC DIAGRAM
9 OSD PACK SCHEMATIC DIAGRAM
10 CYLINDER STATOR UNIT SCHEMATIC DIAGRAM
11 AV FRONT SCHEMATIC DIAGRAM
12 TV DEMODULATOR PACK SCHEMATIC DIAGRAM
CIRCUIT BOARD ASSEMBLIES
1 POWER C.B.A.
2 CYLINDER STATOR UNIT
3 MAIN C.B.A.
4 HEAD AMP C.B.A.
5 AV FRONT C.B.A.
6 TV DEMODULATOR PACK C.B.A.
7 OSD PACK C.B.A.
EXPLODED VIEWS
1 CHASSIS PARTS SECTION
2 CASING PARTS SECTION
3 PACKING PARTS SECTION
REPLACEMENT PARTS LIST
1 CHASSIS PARTS LIST
2 CASING PARTS LIST
3 PACKING PARTS LIST
4 ELECTRICAL PARTS LIST
file:///C|/___________/SVC/sd440eg.html (2 of 2) [23/09/2005 16:27:41]

1 INTRODUCTION

TOP PREVIOUS NEXT

This service manual contains technical information which will allow service personnel to understand and

service this model.

If the circuit is changed or modified, this information will be followed by supplementary service manual

to be filed with original service manual.

Note:

Adjustment procedures, Disassembly Procedures and Assembly Procedures for Mechanism

Chassis are separate volume from this service manual./Please refer to the service manual for

Z-Mechanism Chassis. (Order No. VRD9802005C2)

The Model No. is indicated on the Schematic Diagram and Circuit Board Diagrams as follows.2.

Model No. Indication Mark

NV-SD440EG (EG)

NV-SD440B (B)

NV-SD440BL (BL)

•@

TOP PREVIOUS NEXT

file:///C|/___________/SVC/s0100000000x.html [23/09/2005 16:28:00]

2 GENERAL DESCRIPTIONS
TOP PREVIOUS NEXT
2.1 SERVICE INFORMATION
2.1.1 CHANNEL MEMORY IC INITIALIZATION
2.1.2 CHECKING OF MAIN C.B.A.
2.1.3 CYLINDER UNIT REPLACEMENT
2.1.4 FLAT CARD CABLE INSTALLATION
2.2 REMOVAL OF CASSETTE TAPE
2.3 CAUTION FOR AC MAINS LEAD (NV-SD440B/BL)
2.4 INTRODUCTION OF VIDEO HEAD CLEANING CASSETTE (POLISHING TYPE)
•@
TOP PREVIOUS NEXT
file:///C|/___________/SVC/s0200000000x.html [23/09/2005 16:28:06]

2.1 SERVICE INFORMATION

TOP PREVIOUS NEXT

2.1.1 CHANNEL MEMORY IC INITIALIZATION

2.1.2 CHECKING OF MAIN C.B.A.

2.1.3 CYLINDER UNIT REPLACEMENT

2.1.4 FLAT CARD CABLE INSTALLATION

•@

TOP PREVIOUS NEXT

file:///C|/___________/SVC/s0201000000.html [23/09/2005 16:28:09]

2.1.1 CHANNEL MEMORY IC

INITIALIZATION

TOP PREVIOUS NEXT

When replacing the Memory IC7801 and/or Oscillator X6001, Memory IC7801 has to be initialized due

to the setting value changes.

Note:

When replacing the memory IC7801, the OSD microprocessor IC7703 should be replaced

together.

It has to be performed before tuning.2.

Meaning of "MEMORY IC INITIALIZATION" is to make dependency in different models and to

distinguish between different features.

It does not need to perform when replacing the System Control IC6001.4.

PROCEDURES FIP Display Monitor Screen

Press the FF and EJECT keys simultaneously for 3 seconds. None

Press the FF and EJECT keys simultaneously more twice. None

Press the EJECT key for 3 seconds. None

Press the CH UP key twice. None

file:///C|/___________/SVC/s0201010000.html (1 of 2) [23/09/2005 16:28:12]

Press the POWER key.

(Colon starts flashing)

Service Screen (See Fig.S1 Service

Secreen (sample) )

Set the Model Code and Option Code by pressing 10-key or [RIGHT]

[LEFT] [UP] [DOWN] keys on the Remote Controller Unit. (See Fig.

S2 Model Code & Option Code )

Service Screen (See Fig.S1 Service

Secreen (sample) )

To release Service Mode, press the POWER key and then press the

FF and EJECT keys simultaneously 6 times until the normal

indication on the FIP.

None

Fig.S1 Service Secreen (sample)

Model No. Model Code Option Code 1 Option Code 2

NV-SD440EG 65 8 64

NV-SD440B 73 32 64

NV-SD440BL 77 32 64

Fig. S2 Model Code& Option Code

•@

TOP PREVIOUS NEXT

file:///C|/___________/SVC/s0201010000.html (2 of 2) [23/09/2005 16:28:12]

2.1.2 CHECKING OF MAIN C.B.A.

TOP PREVIOUS NEXT

When servicing the MAIN C.B.A., take out the MAIN C.B.A. and mechanism from the frame and turn

over.

And then connect the Extension Cable (VFK2744) between the POWER C.B.A. connector (P1103) and

the MAIN C.B.A. connector (P1001) as shown in Fig. S3 .

Fig. S3

•@

TOP PREVIOUS NEXT

file:///C|/___________/SVC/s0201020000.html [23/09/2005 16:28:15]

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Panasonic Sistema VCR

Panasonic

Panasonic PV-V462 Manuale utente

Panasonic

Panasonic OmnivisionVHS PV-7452 Manuale utente

Panasonic

Panasonic NV-F70EA Manuale utente

Panasonic

Panasonic Omnivision PV-V4620 Manuale utente

Panasonic

Panasonic DVCPRO AJ-D640P Manuale utente

Panasonic

Panasonic AG6540P - TIME LAPSE RECORDER Manuale utente

Panasonic

Panasonic Omnivision PV-4425S Manuale utente

Panasonic

Panasonic NV-SJ400A Manuale utente

Panasonic

Panasonic Omnivision PV-V4611 Manuale utente

Panasonic

Panasonic Omnivision PV-4662 Manuale utente

Panasonic

Panasonic Omnivision VHS PV-VS4820 Manuale utente

Panasonic

Panasonic AJ-D92P Manuale utente

Panasonic

Panasonic AG-DTL1E Manuale utente

Panasonic

Panasonic NV-SD260 Manuale utente

Panasonic

Panasonic NV-SD430 Series Manuale utente

Panasonic

Panasonic Omnivision PV-9400 Manuale utente

Panasonic

Panasonic Omnivision PV-V4523S Manuale utente

Panasonic

Panasonic NV-FJ732EE Manuale utente

Panasonic

Panasonic NV-SJ400A Manuale utente

Panasonic

Panasonic NV-FJ760 Series Manuale utente

Panasonic

Panasonic AG-2530P Manuale utente

Panasonic

Panasonic Omnivision PV-7200 Manuale utente

Panasonic

Panasonic NV-SD450EU Manuale utente

Panasonic

Panasonic AJHD1800 - VTR DVCPRO HD Manuale utente

Manuali Sistema VCR popolari di altre marche

Toshiba

Toshiba M-662 Manuale utente

Sony

Sony GV-500 Primary Manuale utente

JVC

JVC HR-J282EU Manuale utente

Sony

Sony HDCAM-SR SRW5800 Manuale utente

Magnavox

Magnavox VRU242AT Manuale utente

Sony

Sony HVR-M10C Manuale utente

RCA

RCA VR634HF - Hi-Fi VCR Manuale utente

JVC

JVC HR-5910U Manuale utente

JVC

JVC HR-S8600EU Manuale utente

JVC

JVC HR-FS1U Manuale utente

Sharp

Sharp VC-H9888U Manuale utente

FUNAI

FUNAI LC-950 Manuale utente

Sharp

Sharp VC-S2000GM Manuale utente

Sony

Sony Video8 EV-A60 Manuale utente

Aiwa

Aiwa HV-E212 Manuale utente

JVC

JVC HR-J3006UM Manuale utente

GE VG4271 Manuale utente

RCA

RCA VR678HF Manuale utente