March 2016 3/9 www.trackthestars.com
Introduction
TTS-160 Sidemount Dovetail Saddle is an optional accessory to be installed
and used on the TTS-160 telescope mount. It’s made to receive standard
dovetails of the “Vixen” style (approximately 45mm (1.75”) wide and 12 degree
side angles). The capacity is approximately 8 kg telescope weight.
The Sidemount Dovetail Saddle is installed on the side of the mount head. It is
possible to install Sidemount Dovetail Saddles on one or both sides of the
mount head to accommodate one or two telescopes.
With the Sidemount Dovetail Saddle installed the TTS-160 mount solution
becomes extremely compact and easy to transport as no counterweights is
needed.
NOTICE:
The TTS-160 Panther Mount is described in its own user manual. Please read
that user manual before you start using the Sidemount Dovetail Saddles.
Product safety
WARNING:
Never point a telescope towards the sun without a proper full aperture solar
filter.
Do never look in the eyepiece when the mounting is slewing during daytime as
the telescope might pass the sun.
Always setup the mounting on a level surface so that it cannot fall over.
The mounting consists of heavy parts –be careful not to drop these.
Always keep a hand on the telescope when the dovetail adapter is not tightened
(for balancing etc.). All dovetails must have a security stop in each end ensuring
the dovetail can’t slide out of the dovetail saddle.
Electrical safety:
The mounting must be powered from a 12V battery with a 3 Amp fuse. Always
connect all cables to the mount and peripherals before connecting the
battery power.
Disconnect the battery power when the mounting is not in use.
WARNING:
Never use mains power and a power supply for outdoor use.
