Paradox DB7 Manuale utente
Doorbell Installation Manual
DB7 Quick Installation
with BlueEye app
Add Doorbell to Existing Site by Installer
Once Doorbell connected,
next screen will be presented,
Doorbell Added to Site
Press to go to Doorbell
congurations screen
Connect to Site 01 Site 01
Connect Chime to Doorbell
Power for Doorbell
Doorbell Configurations
After the DB7 is connected, plug the DBC5 into the AC outlet. Press the Up and Down arrow
buttons to change the melody. Next, press and hold the Select button for ve seconds
until a beep sound and then press the Ring button of the doorbell. You should hear a beep
from the chime, meaning you are connected. The next time ring button will be pressed, the
selected melody will be played. For other adjustments, please refer to user manual.
Connect the two power wires to the DB7. Existing doorbell wires can be used but BELL can
NOT be connected in series and must be shorted. A wide power supply voltage range can
be used, 12-24 volt AC or DC, minimum 500mA and 7.5W.
Thank you for Considering Paradox Products
Indice
Altri manuali Paradox Accessori
Paradox
Paradox ENVY NVX80 Guida utente
Paradox
Paradox DCT6 Manuale utente
Paradox
Paradox Digital Vision 525D Manuale utente
Paradox
Paradox NV780MR Manuale utente
Paradox
Paradox NVR780 Manuale utente
Paradox
Paradox NV75M Guida
Paradox
Paradox NV35M Manuale utente
Paradox
Paradox MG-PMD85 Manuale utente
Paradox
Paradox GS250 Manuale utente
Paradox
Paradox DB7 Istruzioni operative originali
