Paradyne FrameSaver DSL 9783 CSU/DSU Manuale utente
1
FrameSaverDSL 9783
Installation Instructions
Document Number 9783-A2-GN10-10
September 2000
Product Documentation on the World Wide Web
We provide complete product documentation online. This lets you search the
documentation for specific topics and print only what you need, reducing the waste
of surplus printing. It also helps us maintain competitive prices for our products.
Complete documentation for this product is available at www.paradyne.com.
Select
Library
→
Technical Manuals
→
FrameSaver Frame Relay Devices.
Select the following documents:
Document Number Document Title
9000-A2-GB20
Configuring Frame Relay Service Over DSL
9783-A2-GB20
FrameSaver DSL 9783
User’s Guide
9783-A2-GL10
FrameSaver DSL 9783 Quick Reference
To order a paper copy of a Paradyne document:
Within the U.S.A., call 1-800-PARADYNE (1-800-727-2396)
Outside the U.S.A., call 1-727-530-8623
Upgrading a Basic Unit to SLV
Full SLV capability can be activated in basic FrameSaverDSL models at any time.
This is an optional feature that adds real-time and historical network performance
monitoring and SLA (Service Level Agreement) reporting capabilities to your
FrameSaver unit(s) and network. Simply order an Activation Certificate, providing the
model to be activated (9783), your OpenLaneSLM system license key number, and
the number of FrameSaver units whose SLV capability is to be activated.
The OpenLane SLM system, Release 5.3 or later, is required to schedule the activation
of the SLV feature and to manage the number of activations remaining on the
certificate. OpenLane also provides a Certificate Summary Report to assist you in the
management of the certificate.
2
When the Activation Certificate arrives, add the Activation Certificate Number to your
OpenLane SLM application’s database. Activations can occur at any time, for as many
units as desired, until no activations remain for the certificate. When ready to activate
units, select the units to be activated and schedule the activations. The activations
occur when scheduled, and OpenLane updates the certificate information.
Contact your sales representative for additional information.
Package Checklist
In addition to these instructions, your package should contain the following:
FrameSaver DSL unit
Power cord with a wall-mount 120 VAC power transformer
Tie wrap for power cord strain relief
DSL network access cable with 6-pin connector
FrameSaver DSL 9783 Quick Reference
(Document No. 9783-A2-GL10)
Be sure to register your warranty at www.paradyne.com/warranty.
Before You Install the FrameSaver DSL Unit
Make sure you have:
A dedicated, grounded power outlet that is protected by a circuit breaker within
6 feet of the FrameSaver unit
A clean, well-lit, and ventilated site that is free from environmental extremes
One-to-two feet of clearance for cable connections
A physical connection to the DSL network
An asynchronous terminal or PC (personal computer)
If desired, an operable Ethernet LAN (Local Area Network) connection for access
by an NMS (Network Management System)
Configuration information for the FrameSaver unit being installed or replaced
Appropriate cables:
— Ethernet cable
— Data port cable
— COM port-to-terminal or COM port-to-PC cable
Read the
Important Safety Instructions
beginning on page 16.
3
See the User’s Guide for additional information on:
Configuration Options
Troubleshooting
Technical Specifications
Connectors, Cables, and Pin Assignments
Cables You May Need to Order
If connecting to . . . Order a . . . Feature
Number Part
Number
Asynchronous
terminal or PC with
an 8-pin modular
interface/connector
Standard EIA-232
straight-through cable,
8-pin modular-to-DB25
(14 feet – 4.3 meters)
3100-F2-540 035-0314-1431
PC with a D-Sub9
interface/connector Standard EIA-232
straight-through cable,
D-Sub9-to-DB25
(14 feet – 4.3 meters)
3100-F2-550 035-0313-1431
External device
(e.g., a modem) Standard EIA-232-D
crossover cable
(14 feet – 4.3 meters)
9008-F1-550 035-0336-1431
DSL network
connection;
for use in the U.S.
RJ48C DSL Network Cable,
RJ48C-to-RJ48C/RJ49C
(20 feet – 6.1 meters)
3100-F1-500 035-0209-2031
Contact your sales representative to order cables.
4
Installing the Power Supply
Procedure
1. Insert the supplied power cord’s plug into the POWER jack.
OK
OK
ALM
TEST
ATM
DSL
NetworkSystem Port
9783-C
SLV
FrameSaver
®DSL
SDSL
R
00-16773-01
ETHERNET
P
O
R
T
COM
POWER
NET
Grounded
Power
Outlet
Tie Wrap
2. Plug the power supply into the grounded power outlet and check the LEDs.
If any LEDs light, you have power. If not, refer to
Troubleshooting
in the User’s
Guide for possible explanations.
3. Insert the self-mounting tie wrap in the top left hole (hole with a dark circle around
it) until it snaps securely into place. The tie wrap provides strain relief for the power
cord.
4. Loop the tie wrap around the power cord, thread it through the hole at the base of
the wrap, and pull it snugly around the cord.
5
Connecting to an Asynchronous Terminal or PC
A VT100-compatible asynchronous terminal or a PC providing VT100 terminal
emulation must be used to set up access to and management of the unit.
Procedure
1. Configure the terminal or PC so it is compatible with the FrameSaver unit:
– Baud Rate set to 19.2 kbps.
– Character length set to 8 data bits.
– Parity set to none.
– Stop bit set to 1.
– Flow Control set to None.
2. Insert the DB25 end of the EIA-232 cable into the FrameSaver unit’s COM port.
COM
Port
00-16685-01
ETHERNET
P
O
R
T
COM
POWER
NET
VT100
Terminal
or PC
3. Insert the other end of the cable into the terminal or PC.
4. Tighten the screws on each side of the connector to secure the cable.
5. Press Enter on the keyboard to display the Main Menu.
If the Main Menu does not appear, recheck the terminal or PC settings (see
Step 1), or press the Enter key. Refer to
Troubleshooting
in the User’s Guide for
other possible explanations.
6
Verifying that Self-Test Passed
To verify that the unit passed its self-test, go to the System and Test Status screen.
Main Menu
→
Status
→
System and Test Status
The results of the self-test appear directly under the screen title.
If any failure messages appear, reset the unit by disconnecting, then reconnecting the
power cord. The unit will perform the self-test again. If the failure reappears, call your
service representative for assistance.
A Quick Guide to Configuration
The FrameSaver unit should operate using the default (factory-set) configuration
options, with exception to the changes specified in these installation instructions. Refer
to the following table for help in navigating through the menus.
Press the . . . To . . .
Esc key Go back one screen or menu level. To see a visual
representation of the menu levels, see
Menu Hierarchy
in
the Quick Reference.
Tab key, or
Up (↑), Down (↓),
Left (←) and Right (→)
Arrow keys
Move the cursor from one menu item to the next.
Enter or Return key Complete the menu or option selection.
Spacebar Display the next available setting when changing a
configuration option. All the available settings for an
option appear at the bottom of the screen.
As an example, follow these steps to go to the Configuration Edit/Display menu so you
can start setting up the unit.
Procedure
To load a configuration for editing:
1. From the Main Menu, press the down arrow key twice so the cursor is on
Configuration.
2. Press Enter to display the Configuration menu. The Load Configuration From
menu appears.
3. Press Enter to select Current Configuration (the cursor is already on this
selection). The Configuration Edit/Display menu appears.
This sequence of steps would be shown as the menu selection sequence:
Main Menu
→
Configuration
7
Procedure
To save a configuration option change:
1. Press Ctrl-a to switch to the function keys area at the bottom of the screen.
2. Type sor S(Save) and press Enter. The Save Configuration To menu appears.
3. Press Enter again to save your changes to the Current Configuration.
4. Press Esc until the Configuration Edit/Display menu reappears to continue
configuring the unit.
Press Ctrl-a, type m(MainMenu), and press Enter to return to the Main Menu.
FrameSaver DSL Installation
An Easy Install screen is provided for custom configurations, but is not required for
normal installation.
Procedure
To use the Easy Install screen:
1. Select the Easy Install feature.
Main Menu
→
Easy Install
Easy Install Screen Example
main/easy_install 9783
Device Name: Node A 09/11/2000 00:01
EASY INSTALL
Node IP Address: 000.000.000.000 Clear
Node Subnet Mask: 000.000.000.000 Clear
TS Access: VPI,VCI 0 , 35
Create a Dedicated Network Management Link
Ethernet Port Options Screen
Network 1 DSL Line Rate (Kbps) AutoRate
Network 1 FRF.8 Encapsulation Mode Translation
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
8
2. Enter the Node IP Address and Node Subnet Mask.
3. Select Create a Dedicated Network Management Link, and enter a DLCI, VPI, and
VCI at the ensuing prompts. The Management Link that is created will be used by
the NOC to access the unit.
4. If the Ethernet port will be used, select the Ethernet Port Options Screen. Enable
the interface. Respond Yes to the prompt Would you like to set the
Node’s Default IP Destination to Ethernet? and configure the
following:
– Enter the IP address and subnet mask for the Ethernet interface.
– Enter the Default Gateway Address (the IP Address that will be used for packets
without a route).
– Press the ESC key to return to the Easy Install screen.
5. The Network 1 FRF.8 Encapsulation Mode default setting is Translation.
Encapsulation Translation used for carrying multiple upper layer user protocols
(frame relay PVC and ATM PVC).
Modify to Transparent to use SLV and multiplexed PVC functions.
6. Save the configuration.
7. Install the network cable (see
Connecting to the Network
on page 10).
8. Optionally, install the Ethernet cable (see
Connecting to the Ethernet
on page 11).
9. Install the DTE cable (see
Connecting to the DTE (Router or FRAD)
on page 12).
Physical installation of the unit is complete; the NOC can now remotely access the unit
for additional configuration.
9
Completing Setup of the Unit From the NOC
Procedure
1. Access the remote FrameSaver unit on the TS Management Link that was set up
at the remote site.
2. Ping the FrameSaver unit five times within five seconds. The unit automatically
provisions the TS Access VC.
3. Configure specific frame relay options, including the Data Port Frame Relay LMI
settings, and any other configuration options requiring input or changes from the
default settings.
4. Set the SNMP Traps configuration options (see
Configuring SNMP Trap Managers
and Traps
on page 13).
5. Verify the entire path from the remote unit to the NOC NMS is functioning (see
Verifying the End-to-End Path
on page 13).
6. Verify that data is being received (see
Checking That Data is Being Received
on
page 15).
7. Using the OpenLane VC Provisioning Application or Telnet, create all customer
VCs. This requires creation of the DLCI on the user data port, an internal DLCI, the
VPI/VCI on the DSL interface, specifying all parameters (CIR, Be, Bc), and cross
connecting the VPI/VCIs on the network interface to the DLCIs on the V.35 port.
8. Verify that all PVCs, including Management PVCs, are configured; and to see
whether the PVC is active or not (see
Checking PVC Connections
on page 15).
The FrameSaver installation is complete.
In the User’s Guide, see
Operation and Maintenance
for additional status information,
and
Troubleshooting
for additional troubleshooting information.
10
Connecting to the Network
Now that the FrameSaver unit is set up, the unit can be connected to the network.
Procedure
1. Use the supplied 6-pin cable for the DSL connection. Insert one end of the cable
into the DSL network interface.
2. Insert the other end of the cable into the modular jack labeled NET.
DSL
Network
00-16685-01
ETHERNET
P
O
R
T
COM
POWER
NET
3. Verify that the Network signal (DSL) LED is green. If so, the network interface is
set up correctly and is operational. If not, make sure both ends of the network
cable are properly seated.
4. Check Health and Status messages in the left column of the System and Test
Status screen.
Main Menu
→
Status
→
System and Test Status
Altri manuali per FrameSaver DSL 9783 CSU/DSU
2
Indice
Altri manuali Paradyne Router di rete
Paradyne
Paradyne Hotwire 6211 Istruzioni operative originali
Paradyne
Paradyne Hotwire 6381 Manuale utente
Paradyne
Paradyne Hotwire 6351 Manuale utente
Paradyne
Paradyne Hotwire 6321 Manuale utente
Paradyne
Paradyne Hotwire 6321/6322 IDSL Router Manuale utente
Paradyne
Paradyne Hotwire 6212 Manuale utente
Paradyne
Paradyne 6212-I1 Manuale utente
Paradyne
Paradyne 6211-I1 Manuale utente
Paradyne
Paradyne FrameSaver SLV 9664 Manuale utente
Paradyne
Paradyne FrameSaver 9123 Manuale utente
Paradyne
Paradyne FrameSaver DSL 9783 CSU/DSU Manuale utente
Paradyne
Paradyne JetFusion 2100 Series Manuale utente
Paradyne
Paradyne Hotwire 7995 Manuale utente
Paradyne
Paradyne FrameSaver 9783 Manuale utente
Paradyne
Paradyne BitStorm 6211 CPE Manuale utente
Paradyne
Paradyne iMarc SLV Manuale utente
Paradyne
Paradyne Hotwire 6301 Manuale utente
Paradyne
Paradyne Hotwire 6211 Istruzioni per l'installazione
Paradyne
Paradyne FrameSaver 9783 Manuale utente
Paradyne
Paradyne Hotwire 6381 Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza