8
6. MAINTENANCE
PARKIS construction allows to use it for a long time without any particular maintenance.
Consider these tips to enjoy PARKIS even more:
1. Get your bike clean before you park it in PARKIS.
2. Do not use materials containing solvents or diluents to clean PARKIS.
If you intend not to use PARKIS for a longer period of time (month or more), we rec-
ommend keeping a dolly in the upper position on the stand (deactivated) – how it is
positioned when a bicycle is parked or the equipment is not activated (see par. No. 7). It
increases durability of the spring inside the stand.
7. DEACTIVATION
Perform deactivation prior to dismantling,
maintenance, cleaning or leaving PARKIS
without parked bicycle for a longer period
of time (month or more).
A screwdriver is required for deactivation
process
We strongly recommend you to call some-
one for assistance to hold bicycle in place
to easedeactivation process
1. While bicycle is parked in vertical po-
sition, hold your bicycle rmly in the mid-
dle of handlebar (on stem) and apply light
pressure towards PARKIS (g. 6.A).
2. Place the screwdriver between at met-
al part and pin (g. 6.B).
3. Lever the screwdriver down, (g. 6.C),
until mechanism releases the bicycle
wheel. Please note that bicycle will fall
out if not held rmly and may cause dam-
age or harm.
4. Remove the bicycle and put up PARKIS
wheel support. You have now performed
PARKIS deactivation.
6. A
6. C
6. B
