Parkside PDSS 16 A1 Manuale utente
AIR DIE GRINDER SET PDSS 16 A1
DRUCKLUFT-STABSCHLEIFER-SET
Originalbetriebsanleitung
IAN 327359_1904
AIR DIE GRINDER SET
Translation of the original instructions
GB/IE/NI Translation of the original instructions Page 1
DE/AT/CH Originalbetriebsanleitung Seite 27
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
PDSS 16 A1 GB│IE│NI │ 1 ■
Contents
Introduction...................................3
Intended use..........................................3
Features .............................................4
Package contents ......................................5
Technical data ........................................5
General safety instructions forcompressed air tools .7
Hazards caused by flying parts ...........................8
Hazards caused by entanglement .........................8
Hazards during operation ...............................9
Hazards caused by repetitive movements ..................10
Hazards caused by accessories..........................10
Hazards in the workplace ..............................11
Hazards caused by dust and vapours .....................12
Hazards caused by noise...............................13
Hazards caused by vibrations ...........................13
Additional safety instructions ............................14
Additional safety notices ...............................15
Before use ...................................16
Lubrication ..........................................16
Refilling oil ..........................................16
Connecting to a compressed air source....................17
Operation ...................................18
Changing/inserting the tool/collet chuck. . . . . . . . . . . . . . . . . . . 18
Switching on and off ..................................18
Maintenance and cleaning......................19
PDSS 16 A1
■ 2 │ GB│IE│NI
Troubleshooting ..............................20
Disposal.....................................21
Kompernass Handels GmbH warranty ...........22
Service ......................................24
Importer ....................................24
Translation of the original Conformity Declaration ..25
PDSS 16 A1 GB│IE│NI │ 3 ■
AIR DIE GRINDER SET PDSS 16 A1
Introduction
Congratulations on the purchase of your new appliance. You have
chosen a high-quality product. The operating instructions are part of
this product. They contain important information about safety, usage
and disposal. Before using the product, please familiarise yourself
with all operating and safety instructions. Use the product only as
described and for the range of applications specified. Please also
pass these operating instructions on to any future owner.
Intended use
This appliance is suitable for fine grinding work with sanding pens
for shaped polishers, felt polishers and lamellar grinding wheels.
The tool may only be operated with a compressed air supply. The
maximum permissible operating pressure specified on the tool must
not be exceeded.
This tool must not be operated with explosive, flammable or health-
damaging gases.
Do not use as a lever, crusher or striking tool.
Any other usage or modification of the tool is deemed to be
improper and carries a significant risk of accidents. The manufacturer
accepts no responsibility for damage(s) resulting from improper
usage. This tool is intended for domestic use only.
PDSS 16 A1
■ 4 │ GB│IE│NI
Symbols on the compressed air tool:
WARNING!
Read the operating instructions before use.
Always wear eye protection when using or maintaining
the compressed air appliance.
Always wear a dust mask in situations in which dust is
being generated.
Always wear hearing protection.
Oil daily
Features
Compressed air appliance
Air inlet
Connector nipple (pre-assembled)
Trigger lock
Trigger
Spindle
Collet chuck nut
Collet chuck 1/4” (pre-assembled)
Collet chuck 1/8”
Teflon tape (not included)
Assembly tool (SW 19)
Assembly tool (SW 14)
5x grinding bits (6 mm)
5x grinding bits (3 mm)
PDSS 16 A1 GB│IE│NI │ 5 ■
Package contents
1 air die grinder set PDSS 16 A1
2 assembly tools
1 connector nipple 6.35 mm (1/4”) (pre-assembled)
5 grinding bits (3 mm)
5 grinding bits (6 mm)
1 collet chuck 1/4” / Ø 6.35 mm (pre-assembled)
1 collet chuck 1/8” / Ø 3.2 mm
1 carrying case
1 set of operating instructions
Technical data
Rated air pressure: max. 6.3 bar
Air consumption: 198 l/min
Max. rotational speed: 22500 rpm
Tool fitting: Ø 6.35 mm (1/4”) (collet chuck)
Ø 3.2 mm (1/8”) (collet chuck)
Noise emission values:
Noise measurement determined in accordance with ISO15744:
Sound pressure level: LpA = 88.2 dB (A)
Uncertainty: KpA = 3 dB
Sound power level: LWA = 99.2 dB (A)
Uncertainty: KWA = 3 dB
Wear hearing protection!
PDSS 16 A1
■ 6 │ GB│IE│NI
Vibration emission value:
Vibration values determined in accordance with ISO 28927-12 and
EN 12096:
ah= 3.34 m/s2
Uncertainty K = 0.87 m/s2
WARNING!
► The noise emission levels specified in these instructions have
been measured in accordance with the standardised measuring
procedure specified in ISO 15744 and can be used to make
equipment comparisons. The noise emission values vary in
accordance with the use of the compressed air tool and may
be higher than the values specified in these instructions in some
cases. It is easy to underestimate the noise emission load if the
compressed air tool is used regularly in a certain manner.
NOTE
► For an accurate estimate of the noise emission load during a
certain working period, the times during which the appliance
is switched off or is running but not actually being used must
also be taken into consideration. This can significantly reduce
the noise emission load over the total working period.
PDSS 16 A1 GB│IE│NI │ 7 ■
WARNING! General safety instructions
forcompressed air tools
WARNING!
►Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
NOTE
► The terms "compressed air tool" or "tool" used in the following
text refer to the compressed air tools specified in these operating
instructions.
Save all warnings and instructions for future reference.
■ The user must evaluate the specific risks that may arise due to
different kinds of use.
■ Please ensure that you have read and understood the safety
instructions before fitting, operating, repairing, servicing or
replacing any accessories and before working near the
compressed air tool. Failure to do this can result in serious
bodily injury.
■ The compressed air tool should only be set up, adjusted or used
by adequately qualified and trained operators.
■ The compressed air tool may not be modified. Modifications can
reduce the effectiveness of the safety measures and increase the
risks for the operator.
■ Never use damaged compressed air tools. Maintain compressed
air tools with care. Check regularly whether moving parts function
correctly and do not jam; check whether any parts are broken or
damaged to an extent that the compressed air tool will no longer
operate correctly. Check signs and labels for completeness and
Altri manuali per PDSS 16 A1
4
Indice
Lingue:
Altri manuali Parkside Macinacaffè
Parkside
Parkside PWS 125 A1 Manuale utente
Parkside
Parkside PWS 125 F5 Manuale utente
Parkside
Parkside PWS 125 F5 Manuale utente
Parkside
Parkside PFBS 10.8 A1 Manuale per l'uso e la cura
Parkside
Parkside PWSA 12 B1 Manuale utente
Parkside
Parkside PFBS 9.6 V - 2 Manuale utente
Parkside
Parkside PDS 200 A Manuale utente
Parkside
Parkside PWS 230 D4 Manuale utente
Parkside
Parkside PWSA 20-Li C3 Manuale utente
Parkside
Parkside 275384 Manuale utente
Parkside
Parkside 314188-2001 Manuale utente
Parkside
Parkside PWS 125 C3 Manuale utente
Parkside
Parkside PWS 230 SE Manuale utente
Parkside
Parkside PWSA 20-Li B3 Manuale utente
Parkside
Parkside PWS 125 A1 Manuale del proprietario
Parkside
Parkside PWS 1010 - MANUEL 2 Manuale utente
Parkside
Parkside PWS 230 A1 Manuale del proprietario
Parkside
Parkside 79191 Manuale utente
Parkside
Parkside PDS 200 A Manuale utente
Parkside
Parkside PWS 125 A1 Manuale utente
