PATROLLINE HPS 548N Manuale utente

HPS 548N REL.00 PAGE 1OF 22 GIU 2008 CODE: 00-99-0548N10

HPS 548N

Thank you for choosing

one of our products.

We ask you to read carefully this manual and save it

for any future reference.

Hps 548N is an alarm that can be used for the

protection of mopeds, scooters or motorcycles.

HPS 548N REL.00 PAGE 2OF 22 GIU 2008 CODE: 00-99-0548N10

...................................................................................... 2

................................... 3

..................................................... 4

....................................................................... 5

................................................................................ 5

...................................................................................... 5

.............................. 5

............................................................................. 5

........................................................................ 6

.......................................................................... 6

............................................. 6

........................................ 7

......................................................... 7

........................................ 9

................................9

......................................................12

............................13

................................................13

................................................................14

...........................................................15

............................16

........................................................17

...............................................18

..............................................19

...................................................20

...................................................................20

..................................................................21

notes.....................................................................................22

......................................................22

HPS 548N REL.00 PAGE 3OF 22 GIU 2008 CODE: 00-99-0548N10

User’s manual

Thank you for choosing one of our products.

HPS 548N is an innovative alarm system for motorcycles and scooters endowed with rolling code remote control and with

many possibilities of customisation.

It has all the “typical” features of the high class models and some extra functions, as: emergency blinkers, “smart” indicator for

blinkers on and customisable pin code for release, all programmable directly though remote control.

Moreover, it uses the brand new technology CYBER : a special transmitter with identifier integrated.

CYBER is in the meantime a transponder and a remote control. By pressing its buttons, it commands directly the alarm system

(like a remote control); having it on, like a normal business card or other personal object, it arms and disarms the alarm

system.

It is also able to manage the anti-theft and anti-aggression functions (if programmed) checking that the owner is driving the

vehicle and taking otherwise the right precautions.

Automatic functions of CYBER:

If HPS 548N does not receive CYBER for more than 12 seconds, it automatically arms.

If the armed alarm detects the “presence” of” CYBER, it will confirm it by a bi-tonal sound and by a more frequent

flashing of the LED.

To disarm the alarm system, it will be enough to “touch” the vehicle or switch on its ignition key.

The disarmed alarm will confirm the “presence” of CYBER by 3 quick flashings of the LED on the dashboard.

To arm and disarm it is possible to use both the remote control and CYBER.

HPS 548N REL.00 PAGE 4OF 22 GIU 2008 CODE: 00-99-0548N10

ARMING THE ALARM SYSTEM

Press the "A button" of the remote

control or CYBER. The arming will be

confirmed by:

3 acoustic signals (beeps)

3 flashings of the blinkers

Switching on of the LED on the

dashboard

Activation of the electric engine

immobilization.

ALL THE INSTRUCTIONS CONCERNING THE

USE OF THE REMOTE CONTROLS REFER TO

THESE PICTURES

The HPS 548N is endowed with 1

remote control and 1 CYBER

DISARMING THE ALARM SYSTEM

Press the "A button" of the remote

control or CYBER. The disarming will be

confirmed by:

An acoustic signal (beep)

1 long flashing of the blinkers

Switching off of the LED on the

dashboard

Deactivation of the electric engine

immobilization

Signalling of alarm memory –

when needed (indicator lights and

beep).

EMERGENCY RESET:In case of emergency, due to electromagnetic fields or radio frequency interferences, it is possible to

press the button “C” OF CYBER..You will obtain 6 quick transmissions helpful to disarm the alarm or to switch off the anti-theft

and anti-aggression functions (if programmed).

HPS 548N REL.00 PAGE 5OF 22 GIU 2008 CODE: 00-99-0548N10

During the first 5 seconds of arming (LED fixed), pressing the “button B” of the remote control it is possible to exclude the

siren operation. Two acoustic signals will confirm that the siren sound has been excluded.

In this case the central unit will signal the alarm state only by the flashing of the indicators lights.

Warning: in case the ignition key is turned on or the “button B” of the remote control is depressed (panic alarm), the

siren sound is restored.

Once the arming is over (LED fixed), the central unit is ready to signal every attempt of theft. The alert state is signalled by the

flashing of the LED installed on the dashboard.

In case of effraction, shock, lighting of the console, opening of telealarms (if installed), opening of protected vain or prop-stand,

the system will emit an optic-acoustic signal (indicator lights flashing and siren sound) for 30 seconds.

To interrupt the signalling without disconnecting the alarm, depress the “button B” of the remote control.

To interrupt the signalling and disconnect the system, depress the “button A” of the remote control.

During the alert state, if the alarm sensors notice for 3 consecutive times a cause of alarm, at the fourth cause of alarm the

central unit will exclude the siren signalling the alarm state only with the flashing of the indicator lights. However, during this

phase the electric block of the engine is active.

Warning: in case the ignition key is turned on or the “button B” of the remote control is depressed (panic alarm), the

siren sound is restored.

5 seconds after arming (LED flashing), depress the “button B” of the remote control: the central unit does a cycle of alarm of 28

seconds. To interrupt the cycle of alarm, depress the “button B” again.

HPS 548N REL.00 PAGE 6OF 22 GIU 2008 CODE: 00-99-0548N10

Pushing button “C” of the transmitter it is possible to switch on the 4 blinkers of the motorcycle (Hazard function). The central

unit will alight the blinkers for an indeterminate period. This function is available both with key position in on position and in off

position. To interrupt the blinker’s signaling push again the “C” button. The exclusion of the function will be signaled by a beep.

If the central unit records one or more causes of alarm, they are signalled when disarming by a further flashing of the indicator

lights and by a number of “beeps” equal to the happened alarms (max 7 signalling).

HPS 548N is endowed with buffer batteries that guarantee its operation also in the case the cable that connects the battery to the

electric plant of the vehicle is cut. The battery backup is automatically armed when the black connector of the alarm wiring is

connected.

During the alert state, if the alarm is disarmed by the mechanical key or it is detached from the cable harness, when restored it will

“remember” the state in which it was, preventing in this way every attempt of tampering.

It must be used to disconnect the system when the remote controls don't work or are lost and the central unit is still armed:

The code is always a number of 3 figures (from the factory it is: 1-2-3) and it must be composed with the ignition key performing

this procedure (with the alarm armed):

1. Turn on and off the ignition key as many times as the value of the first figure is (1 time in the case of code of factory).

During the composition of the secret code, the LED on the dashboard remains turned on and the siren plays.

Wait for the LED on the dashboard to be OFF.

2. Turn on and off the ignition key as many times as the value of the second figure is (2 times in the case of code of factory)

HPS 548N REL.00 PAGE 7OF 22 GIU 2008 CODE: 00-99-0548N10

3. Wait for the LED on the dashboard to be OFF.

4. Turn on and off the ignition key as many times as the value of the third figure is (3 times in the case of code of factory)

If the operation is correct, after the third figure the system is disarmed.

This operation allows to personalize the secret code of release from the one of factory (1-2-3) to the desired one, following this

procedure:

1. By the ignition key, compose the old secret code as described in the previous paragraph.

2. Wait for 4 flashes of the indicators lights as confirmation that the old code of release is correct.

3. Turn on and off the ignition key as many times as the value of the first figure that you want to modify is.

4. During the composition of the secret code, the LED on the dashboard remains turned on.

5. Wait for the LED on the dashboard to be OFF.

6. Turn on and off the ignition key as many times as the value of the second figure that you want to modify is.

7. Wait for the LED on the dashboard to be OFF.

8. Turn on and off the ignition key as many times as the value of the third figure that you want to modify is.

If the operation is correct, after the third figure the alarm will emit a series of beeps and it will make the LED flashing as

confirmation that the new code of release has been memorized and has replaced the previous one.

If the procedure is not correct, the alarm will emit a beep but it won't turn on the LED of the vehicle and the code of release won't

result changed.

Hps 548N has the possibility to modify the most common features by following this procedure:

1. With the system disarmed (LED off), compose the “secret code of release” by the ignition key (see paragraph “Use of the

Secret Code Of Release”).

At the end, the indicator lights will quickly flash to confirm that the code of release is correct.

2. Compose by the ignition key the figure 4 (turn on and off the ignition key for 4 times consecutively).

HPS 548N REL.00 PAGE 8OF 22 GIU 2008 CODE: 00-99-0548N10

A beep will confirm that the modification procedure is started.

3. Depress in the same time the “button A” and the “button B” of the remote control.

Maintain the buttons depressed until you get the beeps corresponding to the function you want to modify.

Once reached the position that you want to modify, release the buttons of the remote control. After few seconds:

If the LED remains turned on, it confirms the activation of the corresponding function. Or

If the LED remains off, it confirms the deactivation of the corresponding function.

To modify more functions, it is necessary to repeat this sequence more times.

N° BEEP

Description

Is of the function

1BEEP

Exclusion of Acoustic Signals of Arming and Disarming

DISARMED

2BEEPS

Hazard Signalling

DISARMED

3BEEPS

Acoustic Signalling of Inserted Indicator Lights

DISARMED

4BEEPS

Automatic Arming of the Block Engine Only

DISARMED

5BEEPS

Anti-Aggression: before programming this function it is extremely

necessary to read the additional sheet (Red color) of contained in the

box

DISARMED

6BEEPS

Automatic Arming

DISARMED

7BEEPS

Automatic Rearming

DISARMED

8BEEPS

Disarming of Optic-Acoustic Confirmation of Cyber Reception

DISARMED

9BEEPS

Exclusion Signalling Led in Anti-Aggression Function

DISARMED

10 BEEPS

Exclusion Signalling Led during Automatic Functions

DISARMED

11 BEEPS

Exclusion Disarming by Shock

DISARMED

12 BEEPS

Exclusion Arming by Cyber

DISARMED

13 BEEPS

Exclusion Disarming by Cyber

DISARMED

HPS 548N REL.00 PAGE 9OF 22 GIU 2008 CODE: 00-99-0548N10

14 BEEPS

Casual Anti-Aggression Activation

DISARMED

It is possible to verify the state of the 14 functions programmed by the acute or deep sounds given by the alarm.

With the system disconnected (LED off), compose the “secret code of release” by the ignition key (see paragraph

“Use of the Secret Code Of Release”)

At the end, the indicator lights will quickly flash to confirm that the code of release is correct.

Compose, by the ignition key, the figure 2 (turn on and off the ignition key for 2 times consecutively).

The LED will flash 14 times.

If the function corresponding to the number of the LED flashing is disarmed, a beep of acute tonality will be heard.

If the function corresponding to the number of the LED flashing is activated, a beep of deep tonality will be heard.

1. Deactivation of ON –OFF acoustic signals

Arming or disarming the alarm system depressing the “button A” is signalled via a blinkers flash as well as an acoustic

warning. It may sometimes be necessary the exclusion of the acoustic warning and having a silent signalling.

Arming/disarming depressing the “button A” in this case will be signalled via blinkers only.

2. Hazard signalling

Activating this function, it is possible to signal the standstill of the vehicle by the indicator lights. With the function activated,

turn the ignition key in position ON and make the indicator lights flashing once. The central unit will make the indicator lights

flashing for an indefinite time. It is possible to interrupt the signalling by turning on an indicator light or by pressing the

“button B” of the remote control. The exclusion of this function is signalled by a beep.

3. Acoustic signalling of inserted indicator light

HPS 548N REL.00 PAGE 10 OF 22 GIU 2008 CODE: 00-99-0548N10

Using the vehicle, it can happen to forget an indicator light inserted. In this case, after 32 flashes of the indicator light (right or

left indifferently), the alarm will signal this forgetfulness to the driver with a brief acoustic signal. If the indicator light remains

activated (e.g. you are at a crossroads and the waiting time is quite long), the alarm will repeat the acoustic signal after 12

flashes of the indicator light and so on.

4. Automatic arming with block engine only

In this case, every time you turn off the ignition key, you obtain only the arming of the electric block of the engine. After 20”,

signalled by the flashing LED, the alarm emits a series of beeps to confirm that the electric block of the engine is activated. If

it is tried to restart the engine, without disconnecting this protection, the alarm will emit some beeps of warning that the

function is inserted.

The disconnection with the function active (LED off) is done depressing the “button B” of the remote control, with the

reception of CYBER signal or inserting the secret code of release.

The turning off of this function is signalled by a sound of the alarm.

The disconnection with the function in phase of activation (LED flashing) is done with the reception of CYBER signal or by

depressing the anti-aggression button. The turning off of this function is signalled by a sound of the alarm.

5. Anti-Aggression

For the activation of this function please Read the additional Red colored sheet

6. Automatic Arming

If activated, this function allows the activation of the alarm in automatic way every time the ignition key is turned off. After

30”, signalled by the LED turned on fixed, the alarm will automatically be activated.

Disarming with the alarm connected (flashing LED) is possible with the reception of CYBER signal, by depressing the

“button A” of the remote control or inserting the secret code of release.

Indice

Altri manuali PATROLLINE Sistema di sicurezza

PATROLLINE

PATROLLINE HPS 845 Manuale utente

PATROLLINE

PATROLLINE HPS 930 Manuale utente

PATROLLINE

PATROLLINE HPS 940 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente