IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety
precautions should be followed as follows:
• Read all instructions.
• Do not use for anything other than intended use.
• Do not leave the appliance unattended during operation.
• Do not place the unit on or near gas or electric cooktops or ovens to avoid
damages.
• Place the unit on a level surface away from walls and cupboards . Do not let the
cord hang over the edge of a table or counter or touch hot surfaces.
• Close supervision is necessary when any appliance is used by or near children.
• Keep hands, hair, clothing, and utensils away from the moving parts while in use
as to avoid injury and damage to the unit.
• Unplug unit from outlet before cleaning and clean after every use.
• Do not use unit with an extension cord, always plug into a wall outlet.
• To prevent electrical shock do not immerse cord, plugs or appliance in water or
other liquid.
• Do not let cord hang over the edge of a table or counter or touch any hot
surfaces.
• Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner.
• Do not use outdoors.
• The use of unauthorized attachments is not recommended by the appliance
manufacturer, this could cause injuries or damage to the unit.
• Never switch on the appliance without properly placed bread pan filled
ingredients.
• Before use, check that the voltage of the wall outlet corresponds to the one
shown on the rating label.
• Do not touch hot surfaces, always use handles and oven mitts when handling the
bread pan after baking.
• Do not place hands on window while the unit is in use.
• Avoid contact with moving parts during operation.
• To disconnect, turn OFF, the remove plug from wall outlet.
• The appliance is not intended to be operate by means of an external timer or
separate remote-control system.
• This appliance has a polarized plug (one blade is wider than the other). To reduce
the risk of electric shock, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.