BRF210 –Hardware Installation Guide
Version: 0.1
Page | 4 of 7
1OVERVIEW
Hardware Overview
The BRF contactless antenna is an optional receiver that can be plugged into the SCR to support contactless
payments (e.g. Visa PayWave, MasterCard PayPass).
Supports closed loop proprietary payment cards (e.g MiFare)
32-Bit Cortex M3 120MHz processor
Display LEDs x4
Physical Link Interface
Connection with the SCR unit is via the attached cable located on the back of the BRF unit.
Power Requirements
The device accepts DC regulated from +5V to +45V. SELV (Safety Extra Low Voltage)
Standards Compliance
EMV Level 1 & 2
Visa PayWave v2.1
MasterCard PayPass v3.0
EMC Standards
oAS/NZS 4268: 2012
oETSI EN 302 291-2, V1.1.1, 2005
oEN 301 489-3 V1.4.1
oAS/NZS CISPR 22: 2009 + Amendment 1: 2009
Environmental Standards
oIEC 60529 : 2013 (Ed 2.2) –Degrees of protection provided by enclosures –IP66
oIEC 60068-2-6 : 2007 (Ed. 7.0) –Sinusoidal Vibration
oIEC 60068-2-64 : 2008 (Ed. 2.0) –Broadband Random Vibration