PC Vision ADM-4X Manuale utente
1
ADM-4X
User Manual
2
Copyright information
Copyright © 2013PC Vision Limited. All Rights Reserved.
No Part of this manual, including the products and software described in it, may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form or by any means, except documentation kept by the purchaser for
backup purposes, without the express written permission of PC Vision Limited (“PC Vision”)
Product warranty or service will not be extended if : (1) the products is repaired, modified
or altered, unless such repair, modification of alteration is authorized in writing by PC Vision;
(2) the serial number of the product is defaced or missing.
PC VISION PROVIDES THE MANUAL “ AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLED INCLUDEIND BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT
SHALL PC VISION, ITS DIRECTORS, OFFICERS EMPLOYEES OR AGENTS BE LIABLE OR ANY
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES
FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE IR DATA, INTERRUPTION OF BUSINESS
AND THE LINK). EVEN IF PC VISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OF PRODUCT.
Copyright © 2013 PC VISION LIMITED. All Rights Reserved.
Product Name：
Manual Version：
Release date：
ADM 4X
V1.0
Oct. 2013
3
PC Vision Limited
Address: 11F., No.70, Section 1, Chengde Road,
Datong District, Taipei 10355,
Taiwan R.O.C.
Tel: (886) 02-2555-2578
Fax: (886)02-2558-7287
Website: www.pcvision.com.hk
4
Overview
Thank you for purchasing PC Vision ADM 4X. The ADM 4X are designed to power
multiple screens for digital signage applications. The ADM 4X effective support Intel,
AMD, nVidia’s graphics card and operating system into thinking that output
devices is one extremely wide monitors. it also has an operational mode allowing
you to "Clone" and "Stretch" the same output onto four separate monitors.
No software drivers and low power consumption, ADM 4X contains the latest image
processing technology, high-quality video and the best visual experience, ADM 4X
exclusive OLED hardware control and friendly ADM 4X Control Center software can
be display supports up to maximum 4 display contents.
ADM 4X provides superior image editing on the multi-display applications, In the
multiple-screen system, 3D animation, digital signage and digital signage
applications market place, all of you are best solution.
5
Hardware supplied
-Please check the package list:
-ADM 4X
-2 * Input Cable (mini Display Port to Display Port)
-1 * USB Power/Control Cable
1. Optional items not included in the product which you have purchased.
2. If you find the product package components are damaged, please contact
your dealer immediately.
3. This product can be shipped with a card reader or floppy drive, depending on
your host device based on the actual match.
6
ADM-4X Connection Setup
Notes:
To make sure that ADM 4X input cable connected with graphics card or motherboard’s
two DP input terminals 。Please check that ADM 4X output can connect up to 4 external
display output then check the plug in the ADM 4X USB power control line.
7
OLED Display
The OLED display provides that connect status and parameter settings.
Changing Display Setting for Stretch Mode
1. Enter Main Menu to select Display Control
2. As following setting:
Mode Status: Stretch
Display Layout: 2x2
Up/Down Port: 3840 x 2400
Or
Mode Status: Stretch
Display Layout:1x4
Up/Down Port:7680 x 1200
3. Installing AMD-Eyefinity / Nvidia-Mosaic & Intel-collage multi-display driver
4. To select the display layout ( display layout 1x4 ; resolution 7680x1200
and display layout 2x3 ; resolution 3849 x2400)
5. Done
8
Changing Display Setting for Clone Mode
1. Enter Main Menu to select Display Control.
2. As following setting:
Mode Status: Clone
Display Layout: 1x4
Up/Down Port: 1920 x1200
Or
Mode Status: Clone
Display Layout: 2x2
Up/Down Port: 3840 x 1200
3. Done
Bezel Correction Setting
1. Enter Main Menu to select Display Control。
2. As following setting:
H Bezel: 00001
and
V Bezel: 00001
3. As instruction to H Bezel Correction。
4. As instruction to V Bezel Correction。
5. Done。
9
ADM 4X Control Center
Make sure to the ADM 4X Installer Main Menu for start installing 2 set of drivers: 「CP210x
Bridge Driver」and 「ADM4X Control Center」。
To installing CP210x Bridge Driver (This is the UART Driver)，please following step as:
Step 1: following and click next。
10
Step 2: Accept then click next
Step 3: Done
Step 4: please check the CP210xUSB to UART Bridge is appears after done.
Indice
