PDi PDI-P19A Manuale utente

Document Number: PD196-328R2

PDI-P19A

Arm-Mounted, Healthcare-grade

LCD Monitor with Android

Your Source for Healthcare and

Wellness Infotainment

™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 2 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

Limited Warranty

PDi Communication Systems Inc., (“PDi”) warrants, to the original purchaser only, that the product will be free from defects in materials and

workmanship, under normal use, for 2 years from the date of original purchase. This warranty does not cover any other equipment that

may have been included with PDi’s shipment of this product.

After receipt of written notice of a defect or malfunction occurring during the warranty period, PDi will repair or replace goods returned to its

Springboro, Ohio location, at its discretion, the whole or any component part of any product manufactured by PDi and found by PDi to be

defective. If the decision is made to replace the product, PDi will exchange the model for the same model or a model similar in form and

function.

As a condition to obtaining warranty service, written notification of the defective product must be received by PDi within ten (10) days of

noticing the defect. Repair of said product requires it to be shipped to the PDi factory in Springboro, Ohio. All shipments shall be F.O.B.

Springboro, Ohio, and all shipping and freight charges to PDi’s factory shall be paid by the customer.

For information regarding authorized servicing and all other information pertaining to this warranty, please contact PDi COMMUNICATION

SYSTEMS at 40 Greenwood Lane, Springboro, Ohio 45066 or phone 800-628-9870 and ask for Service.

This warranty gives specific legal rights and you may also have other rights which vary from state to state.

Exclusions from Warranty

•Products damaged by any catastrophe, accident, or from neglect, misuse, fault, improper assembly, improper maintenance,

inadequate return packaging, or negligence by the customer or any third party. They will be treated as out of warranty for external

cause to the Products, such as, but not limited to, failure of or faulty electric power, air conditioning, operator error, failure or

malfunction of any data communications system. Such conditions will be determined by PDi at its sole unfettered discretion.

•Service and repair of accessories, apparatus, attachments or any other devices which are not PDi products or options.

•Defacing of product, revision control and PDi labeling (label alterations, serial number missing, serial number no longer discernible

and serial number invalid). All serial numbers are recorded and tracked for warranty purposes.

•Unauthorized changes, modifications or alterations in or to the Products not installed by PDi.

•Damage to or loss of any programs, data, or removable storage media.

•Damage incurred during installation, relocation or removal of the Products or any accessories, apparatus, attachments or other

devices.

•Normal wear.

•The furnishing of accessories or supplies.

•Damage by shipping carrier.

•Incompatibility issues.

•Damages of any kind including, but not limited to, direct or indirect damages, lost profits, lost saving, or other special incidental,

exemplary or consequential damages whether for breach of contract, tort or otherwise, or whether arising out of the use of or

inability to use the product, even if PDi or any distributor, dealer, or authorized service provider has been advised of the possibility

of such damages, or any claim by any other party

•Damage caused by any software or application not installed at the factory.

PDi’s liability under this warranty is limited to repair or replacement of defective products and parts as provided above. PDi shall not be

liable for incidental or consequential damages.*

The warranty contained herein is in lieu of all other expressed or implied warranties, including any implied warranty of merchantability or

fitness for any particular purpose. PDi neither assumes nor authorizes any person to assume, on its behalf, any other obligation or liability.

*Some states do not allow the exclusion or limitation of incidental or consequential damages or a disclaimer of warranties implied by law,

so the above limitation or exclusion may not apply.

The information and technical data in this manual is believed accurate, but is not warranted and is subject to change without notice or

obligation. PDi reserves the right to change this policy without advance notice.

Your Source for Healthcare and

Wellness Infotainment

™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 3 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

Overhead Falling Hazard

WARNING: To prevent injury, this apparatus

must be securely attached to the floor/wall in

accordance with the installation instructions.

Monitor can pose a striking hazard when

mounted at an elevated position. Use only PDi

mounting brackets, support arms, and

appropriate hardware to assure Monitor will not

fall from the mounted position

Rain and Moisture

WARNING: To avoid the hazards of fire or

electrical shock, DO NOT expose this television

to rain or moisture.

Oxygen Environment

WARNING: Do not use in any oxygen tent or

oxygen chamber. Such use may cause a fire

hazard.

Note to Cable TV Installer (If applicable)

This reminder is provided to call the cable TV systems

installer’s attention to Article 820-40 of the National

Electrical Code. The code provides guidelines for proper

grounding

and, in

particular,

specifies

that the

cable

ground

shall be

connected

to the

grounding

system of the building, as close to the point of

the cable entry as practical. Canadian installations shall be

properly grounded in accordance with the Canadian

Electrical Code, Part 1.

FCC

This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when

the equipment is

operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference in

which case the user will be required to correct the

interference at his own expense.

Maintenance and Servicing

The Monitor does not require periodic maintenance other

than cleaning. Never remove the back cover of the

Monitor; this can expose you to high voltage and other

hazards. If the Monitor does not operate properly, unplug it

and call an authorized service center or PDi.

Cleaning and Disinfection

Clean the exterior of this monitor by removing dust with a

lint-free cloth. Suggested cleaning agent is 5% Bleach and

Water solution. CAUTION: To avoid damage to the

surface of the monitor, do not use abrasive or chemical

cleaning agents. Spot test a new disinfectant by test

cleaning a non-obvious small spot on the Monitor’s back

cabinet, keypad, and LCD panel. Allow the disinfectant to

soak per its instructions and then wipe clean. Do not use

the disinfectant if the Monitor’s surfaces show any sign of

discoloration or softening.

Product Modification

Do not attempt to modify this product in any way without

written authorization. Unauthorized modification could void

the user’s authority to operate this product.

reserved. PDi-TAB® is a registered trademark of PDi

Communication Systems, Inc. Product logos, brands and

other trademarks displayed within PDi’s products are the

property of their respective trademark holders, who are not

affiliated with, endorsing, or sponsoring PDi Communication

Systems, Inc. or our products.

Underwriters Laboratories

Your Source for Healthcare and

Wellness Infotainment

™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 4 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

The model PDI-P19A Healthcare Grade LCD

Monitor is a specialized monitor and should be

installed to National Electrical Code specifications.

This device is safety tested and listed by the

Underwriters Laboratories as a product suitable for

use in health-care facilities in both the United States and

Canada.

Disclaimer

The author and publisher have used their best efforts

in preparing this manual. PDi Communication

Systems, Inc. makes no representation or warranties

with respect to the accuracy or completeness of the

contents of this manual and specifically disclaims any

implied warranties or merchantability or fitness for

any particular purpose and shall in no event be liable

for any loss of profit or any other damages. The

information contained herein is believed accurate, but

is not warranted, and is subject to change without

notice or obligation.

Your Source for Healthcare and

Wellness Infotainment

™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 5 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: THIS INSTALLATION SHOULD BE MADE BY A

QUALIFIED SERVICE PERSON AND SHOULD CONFORM TO

ALL LOCAL CODES. READ AND FOLLOW THE SAFETY

INSTRUCTIONS BEFORE ATTEMPTING THIS INSTALLATION.

1. Read Instructions – All the safety and operating instructions

should be read before the product is operated.

2. Keep these Instructions – The safety and operating

instructions should be retained for future reference.

3. Heed all Warnings – All warnings on the product and in the

operating instructions should be adhered to.

4. Follow all Instructions – All warnings on the product and in

the operating instructions should be followed.

5. Water and Moisture – Do not expose this product to rain or

moisture. Do not use this product near water – for example,

near a bath tub, wash bowl, kitchen sink, or laundry tub; in a

wet basement; or near a swimming pool; and the like.

6. Cleaning – Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners.

Clean only with a dry cloth.

7. Ventilation – Slots and openings in the cabinet are provided

for ventilation to ensure reliable operation of the product and

to protect it from overheating. These openings must not be

blocked or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar

surface. This product should not be placed in a built-in

installation such as a bookcase or rack unless proper

ventilation is provided or the manufacturer’s instructions

have been adhered to.

8. Heat – The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

9. Power-Cord Protection – Protect the power cord from being

walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the product.

10. Attachments – Only use attachments/accessories specified

by the manufacturer.

11. Use only with cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is

used, use caution when moving the

cart/apparatus combination to avoid injury

from tip-over.

12. Lightning – For added protection for this product during a

lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line

surges.

13. Servicing –Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged

in any way, such as power cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

14. Oxygen Environment – Do not use in an oxygen tent or

oxygen chamber. Such use may cause a fire hazard.

15. To prevent injury, this apparatus must be securely attached

to the wall in accordance with the installation instructions.

TV’s can pose a striking hazard when mounted at an

elevated level.

16. Power Sources – This product should be operated only from

the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For

products intended to operate from battery power, or other

sources, refer to the operating instructions.

CONSIGNES DE SÉCURITÉ IMPORTANTES

CETTE INSTALLATION DOIT ÊTRE EFFECTUÉE PAR UN

TECHNICIEN QUALIFIÉ ET DOIT ÊTRE CONFORME À TOUS

LES CODES LOCAUX. LIRE ET SUIVRE LES CONSIGNES DE

SÉCURITÉ AVANT DE PROCÉDER À L’INSTALLATION.

1. Lire ces instructions.

2. Conserver ces instructions.

3. Respecter tous les avertissements.

4. Suivre toutes les instructions.

5. Ne pas utiliser cet appareil près de l'eau - par exemple près d'une

baignoire, d'un lavabo, dans un sous-sol humide, ou près d'une

piscine ou similaire.

6. Nettoyer avec un chiffon sec. Ne pas utiliser de nettoyants

liquides ou en aérosol.

7. Ne pas obstruer les ouvertures de ventilation. Installer

conformément aux instructions du fabricant. Les ouvertures ne

doivent jamais être obstruées en plaçant le produit sur un lit, un

canapé, un tapis ou toute autre surface similaire.

8. NE PAS installer près de sources de chaleur telles que radiateurs,

registres de chaleur, poêles ou tout autre appareil (y compris les

amplificateurs) qui produit de la chaleur.

9. NE PAS neutraliser le dispositif de sécurité de la fiche polarisée

ou de terre. Ce produit est équipé d'une prise de terre à trois fils,

une fiche ayant une troisième broche (mise à la terre). Cette fiche

ne peut s'insérer que dans une prise de courant avec mise à la

terre. Il s'agit d'une caractéristique de sécurité. Si vous êtes

incapable d’insérer la fiche dans la prise, contacter votre

électricien pour remplacer votre prise obsolète.

10. Protéger le cordon d'alimentation pour qu’il ne soit pas piétiné ni

pincé, en particulier au niveau des fiches, des prises de courant et

au point de sortie de l’appareil.

11. Accessoires - Utiliser uniquement les attaches/accessoires

recommandés par le fabricant.

12. Utiliser uniquement avec un chariot, stand, trépied, support ou

table recommandé par le fabricant ou vendu avec l'appareil.

Lorsqu’un chariot est utilisé, faire attention lors du déplacement

de l'ensemble chariot/appareil afin d’éviter des blessures en cas

de basculement.

13. Débrancher cet appareil en cas d'orages ou lorsqu'il reste inutilisé

pendant de longues périodes.

14. Confier toute réparation à un personnel de service qualifié. Des

réparations sont nécessaires si l'appareil est endommagé d'une

façon quelconque, par exemple : cordon ou prise d'alimentation

endommagé, liquide renversé ou des objets sont tombés dans

l'appareil, l'appareil a été exposé à la pluie ou à l'humidité, ne

fonctionne pas normalement ou s'il est tombé.

15. Sources d'alimentation - Ce produit doit être utilisé uniquement à

partir du type de source d'alimentation indiqué sur l'étiquette. Si

vous n'êtes pas sûr sur le type d'alimentation de votre domicile,

consultez le détaillant de votre produit ou la compagnie

d'électricité locale. Pour les produits proposés de fonctionner par

piles, ou autres sources d’alimentation, reportez-vous aux

consignes d’utilisation.

16. Environnement d’oxygène - Ne pas utiliser sous une tente à

oxygène ou chambre à oxygène. Une telle utilisation peut causer

un risque d'incendie.

Your Source for Healthcare and

Wellness Infotainment

™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 6 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

ARM MOUNTING

This monitor is designed to attach to a wall mounted suspension arm adjusted to support a monitor weighing

twelve pounds (For example: PDI-AA412-XY Series).

The single coaxial cable on top of the Monitor is used to supply low voltage AC or DC power (28VAC or 24VDC)

and the RF signal to the monitor.

Note: Contact PDi for additional information on arm compatibility and cable requirements.

DANGER: ARM RECOIL HAZARD

The safety brake pin must remain in the SAFETY BRAKE PIN HOLE whenever the monitor is

removed from the arm or when the arm is removed from the wall bracket to prevent the arm from

springing open.

1. Slide the Monitor assembly onto the nose of the arm as shown in Fig. 1.

2. Secure PDISHCS252075 bolt with a 5/32” Allen wrench and make coax cable connections as shown in

Fig. 2

MAC ID LABEL

The MAC ID label will be located on the back cover of the unit next to the Android operating instructions label.

This will be specific to the unit.

WIFI ID LABEL (If Applicable)

The WIFI ID label will be located on the back cover of the unit next to the MAC ID label. This will be specific to the

unit.

Fig. 1

Fig. 2

MAC ID

WIFI ID

Your Source for Healthcare and

Wellness Infotainment™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 7 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

ANDROID PROGRAMMING

Enter SETUP MODE/Sources/Source Enable, make sure monitor is set at Enabled/No APO and the

Android-Module is enabled.

*The first time you use the android portion of the P19A Monitor, you will enter the WELCOME screen.

1. This will be a New User Screen where you will be asked to enter a pin number.

2. Entering the PIN will take you to the desktop.

Note: If your power On Source is set to Android – Module, a short touch of the power button puts the android to

sleep (or wakes it up if it was sleeping).

A long touch of the power button reboots the android.

Signing On As a New User (Device Cleanup)

(*Administrative information like Wi-Fi and clone file configuration is retained)

In the initial patient setup, the patient needs to touch the create account button.

Enter the new user name (you may use the default name Patient) and touch Done. Touch Continue (new user)

and wait for the WELCOME Screen.

Your Source for Healthcare and

Wellness Infotainment™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 8 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

After touching Continue on the WELCOME screen you need to enter a security code. This code must be at least 6

digits.

Confirm your code and touch Next when done.

SETTINGS – WIRELESS AND NETWORKS

After confirming your security code, you can enter the Settings screen where you can adjust network, sound, and

account settings, among many others.

1. From the home screen, touch the all apps icon at the bottom of the screen.

2. In the all apps screen, select Settings.

Note: If you are connected using the Ethernet cable, you will not be taken to the next screen. Instead, you will be

taken to the default home screen.

Your Source for Healthcare and

Wellness Infotainment™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 9 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

Connect To Wi-Fi Networks

1. Slide the Wi-Fi switch to the On position.

(If not already set to “on”)

2. The tablet scans for available Wi-Fi networks and

displays the names of those it finds. Secured

networks are indicated with a .

3. If the tablet finds a network that you connected to

previously, it connects to it.

4. Touch a network name to see more details or

connect to it, and type a security code if

necessary.

Your Source for Healthcare and

Wellness Infotainment™

MODEL:

PDI-P19A

Document Number:

PD196-328R2

LCD Monitor with Android Quick Start Guide

Page 10 of 15

PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664

CLONING INFORMATION

Cloning the android portion of the monitor must be performed separately. The cloning for the android will be from

a cable connection in the swivel portion of the monitor.

1. From the android home screen, touch the All Apps

icon .

Note: Default home screen is for illustration purposes

only and may be different for your device.

2. In the All Apps screen, touch the Clone icon.

You may be prompted for a security code by the

security application.

Master Configuration Instructions

Option 1: Set up this device as a server; continue to the

next steps.

Option 2: Slave configuration page 14

You will now have the cloning screen

3. To use this device to generate clone data, touch

Master.

4. Follow Master setup information by sliding the

screens and entering information.

Indice

Altri manuali PDi Monitor

PDi

PDi WaveStar Manuale di istruzioni

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione