PE 2000 FP Manuale utente
Manual for STAR 2000 FP
1
Contents
1.Introduction.........................................................................................................3
1.1 Basic Concepts.................................................. 4
1.1.1 User Enrollment .........................................................4
1.1.2 User Verification.........................................................5
1.1.3 Match Threshold Levels.............................................5
1.1.4 User ID Numbers .......................................................6
1.1.5 Authority (status) Levels.............................................6
1.1.6 Start-up window..........................................................6
1.2 How to place the finger......................................... 7
2.Enrollmentand Verification Procedures..................................................7
2.1 Enrolling Users...................................................... 8
2.1.1 Fingerprint Enrollment................................................9
2.1.2 Password Enrollment...............................................10
2.3.1.3Fingerprint & Password..........................................12
2.2 Testing an Enrollment..........................................13
2.3EnrollingaUserwiththeDisplayFingerOptionOn.........13
2.4 Verifying Your Identity .........................................14
2.4.1 Fingerprint Verification .............................................14
2.4.2 Password Verification...............................................15
2.4.3 ID number & Fingerprint...........................................16
2.5 Hints for Successful Enrollments.......................16
3.SystemOptions ..............................................................................................18
3.1 System Options....................................................18
Manual for STAR 2000 FP
2
3.1.1 Date Time.................................................................19
3.1.4 Advanced Options....................................................19
3.2 Power Manager.....................................................20
3.3 Communication Options......................................21
3.4 Log Options..........................................................21
3.5Auto Test................................................................22
4.SystemInformation.......................................................................................22
5.Trouble shooting.............................................................................................23
.
Manual for STAR 2000 FP
3
1. Introduction
Figure 1~2 keypad
Keypad Definition
Confirm the current present.
Access to manage.
Escape or cancel.
Scroll up.
Scroll down.
Power button.
¯¯ ：Numerical key.
Manual for STAR 2000 FP
4
1.1 Basic Concepts
This section contains definitions and descriptions of Fingerprint
T&A Concepts, including:
¾·User Enrollment
¾.User Verification
¾·Match Threshold Levels
¾·User ID Numbers
¾·Authority (Status) Levels
The two most important Fingerprint T&A Functions are user
enrollment and user verification.
1.1.1 User Enrollment
Enrollment is the process of create an ID number and scanning a
user’s finger to create a template three times. This template is
associated with a user ID number and stored.
During user verification, the stored template is compared to the
current fingerprint scan to confirm the user’s identity.
Enrollment is performed at designated units. The user can verify
on the time recorder that enroll his fingerprint. The enrollment process
takes approximately 2 seconds.
Up to ten fingers can be enrolled for the same ID number, so the
user may have more verifications way.
Ideally, everyone finger on each hand should be enrolled so that
if the user injures the enrolled finger had, an alternate finger template
is available. While recording the finger type is optional, it is
recommended such as left or right index, so that at verification the
user is prompted as to which finger to use.
Manual for STAR 2000 FP
5
1.1.2 User Verification
Verification occurs when a user either enters an ID number or
places a finger in the fingerprint sensor, then input password for
comparison with the stored template.
1.1.3 Match Threshold Levels
The Match Threshold is a number that represents the degree to
which a verification is examined to ensure that the person is the
person claimed.
The Match Threshold Levels establishes a balance between
False Acceptance Rate (FAR) and False Rejection Rate (FRR). FAR
measures how often a non-authorized user is falsely recognized and
granted access to the system. FRR measures how often an enrolled
and authorized user, who should be granted access to the system, is
denied on the basis that the system did not recognize him.
You can set match threshold levels on a per-use basis. For the
fingerprint verification is difficult, you can adopt ID & Fingerprint
verification (match one to one).
Raising the threshold increases security, while lowering it
increases throughout. The correct balance is essential.
For users with worn or damaged fingers, match threshold levels
can (and should) be reduced.
Different sites have different requirements.
Table 1—1 Suggested Match Threshold Settings
FRR FAR One-to-many One-to-one
High Low 45 25
Middle Middle 35 15
Manual for STAR 2000 FP
6
Low High 25 10
1.1.4 User ID Numbers
Before beginning fingerprint enrollment, a user is assigned User
ID Number. This ID number is used to call up the fingerprint template
each time that verification is requested.
ID numbers are called up via the keypad
1.1.5 Authority (status) Levels
Fingerprint T&A has four authority or status levels:
·Users are people whose identity must be verified, such to
gain access to a facility or to have their attendance
recorded.
·Enrollers are Users who are authorized to enroll new users
or delete on to the system.
·Administrator can do other operations, except set advanced
option and enroll administrator authority.
·Supervisors are Users who access to all functions and
change all setup in the system.
Note: Without Administrator and Supervisor status in the system,
the Enroller will enroll them. And if there isn’t a Supervisor in the
system, the Administrator will enroll him.
1.1.6 Start-up window
Click the power button and the screen showed on, a display of a
window was called the Start-up window. The following appears:
Welcome
04-01-02 FRI
Manual for STAR 2000 FP
7
1.2 How to place the finger
The correct way is:
Place a finger flatware on the sensor surface
Place it to the center of the sensor surface
The wrong way is:
+
Note: Please adopt the correct way to place the finger,
2. Enrollment and Verification
Procedures
askew part
Upright Unfettering
Manual for STAR 2000 FP
8
This chapter describes how to enroll and verify users on the
Fingerprint T&Averification system.
The following topics are included:
¾·Enrolling User
¾·Testing an Enrollment
¾·Enrolling a User with the Display Finger Option On
¾·Verifying Your Identity
¾·Hints for Successful Enrollments
Note: You must have Enroller, Administrator, or Supervisor status
to enroll users. For information on status levels, see “Authority
(Status) Levels” on 1.1.5.
2.1 Enrolling Users
If this is the first enrollment in a new or empty system, everyone
will become an enroller.
If there is a manager in the system, you will have Administrator
status to enroll a new user.
There are three ways of enrollment, fingerprint enrollment,
password enrollment, fingerprint & password are suitable for three
differences crowds. Fingerprint enrollment suited the most people
who have better quality fingerprints; Fingerprint & Password suited
few people who enrolling successful, but verification was difficult;
Password enrollment suited 1% people who verification unsuccessful.
To start the enrollment process, identify yourself firstly—press
[Menu], enter your ID number or fingerprint, and then verify your
identity.
Note: If this is the first enrollment in a new or empty system, you
will not be prompted for verification.
The following message appears on the display:
Menu
►User Manage
Options
Sys Info
Manual for STAR 2000 FP
9
Press [OK], access the User Manager, the following message
display:
Press [OK], access the User Enrollment, the following message
display:
2.1.1 Fingerprint Enrollment
(1) Access the Enroll Fingerprint to press [OK], the following
display:
(2) Press [OK], the following appears:
User Manage
►Enroll User
Enroll Admin
Delete
Enroll User
►Enroll FP
Enroll Pwd
FP & Pwd
New Enroll
Enroll No 00001
ESC OK
New Enroll
Enroll No 00008
Manual for STAR 2000 FP
10
(3) Input the enrolling number (the range is 1 to 65534), press [OK],
the following appears:
(4) If the test is successful three times in a row, the following
appears:
Note: 07711-1
The last number 1 means the
first fingerprint.
Press [OK], the previous message continues to be displayed while
the template is created.
If your identity cannot be verified, you are prompted to try again.
And you must restart the verification procedure (step 3).
2.1.2 Password Enrollment
(1) Access the password enrollment, press [OK], the following
appears:
New Enroll
Place Finger…
ESC
New Enroll
00008-1
ESC OK [Save]
Enroll Pwd
New Enroll?
ESC OK
Indice
