Peak Controlmicro PNX13-10001 Manuale utente
V 1.1.3
Controlmicro
User manual
EN
User manual, Controlmicro
Product Item number
Controlmicro PNX13-10001
The product names mentioned in this document may be brands or registered trademarks
of their respective owners. These are not explicitly labeled with “™” or “®”.
© PEAKnx GmbH
Otto-Röhm-Strasse 69
64293 Darmstadt
Germany
www.peaknx.com
Document version: 1.1.3
Date: 01.07.21
This user manual contains the most important information for
operating the Controlmicro in a safe manner. Please study this
manual carefully before working with the device. This applies to
all persons who come into contact with the device.
User manual, Controlmicro
Warning symbols and signal words used in this manual
Warning Obey warning to avoid death or serious injury
Caution Obey instructions to avoid personal injury or damage to property
Note Instructions and facts to be followed
Tip Additional, useful hints
Important safety instructions, please read before installation!
Warning
The device can carry dangerous voltages if improperly installed!
▪Installation and commissioning may only be carried out by specially trained personnel
(qualified electricians).
Caution
Avoid damage to the panel!
▪Only use the panel in perfect condition, as well as in accordance with its intended use,
in a way that is safe and aware of the hazards and in compliance with this manual!
▪Do not make any changes, attachments or conversions to the device without the
manufacturer‘s permission!
▪In particular, have faults that could impair safety immediately eliminated!
User manual, Controlmicro
Table of Contents
Warning symbols and signal words used in this manual 3
Important safety instructions, please read before installation! 3
1 Target audience 5
2 Intended use 5
3 Product description 6
3.1 Software 6
3.1.1 Operating system 6
3.1.2 Operation with the PEAKnx software YOUVI 6
3.1.3 Operation with third-party software 7
3.2 Product features 7
3.3 Device components 8
3.4 Touch panel elements 9
3.5 Mounting plate 10
3.6 Notes on the panel‘s ports 10
3.6.1 KNX terminals 10
3.6.2 Power supply 11
3.6.3 Ethernet port 11
3.6.4 Connections for external mouse and keyboard 11
3.7 Controls 11
3.7.1 Graphical user interface 11
4 Delivery 12
5 Important safety and handling information 13
6 Installation and start-up 13
7 Initial commissioning and operation 15
7.1 Switching the Controlmicro on and o 15
7.2 Setting up the visualization 16
7.3 Control and query of the sensors and the ambient light via http 16
8 Maintenance 17
8.1 Cleaning the touchscreen 17
9. Troubleshooting 18
9.1 Touch panel stops responding 18
9.1.1 Forced restart 18
9.2 Windows has unrecoverable problems 18
9.2.1 Restoring the panel to the state of delivery 18
9.3 Technical support 18
10 Technical data 19
Subject to change without notice 21
Conformity 21
Disposal notes 21
About PEAKnx 23
Page
5
User manual, Controlmicro
1 Target audience
These instructions are intended to explain basic aspects of the installation, commissioning,
operation and maintenance of the Controlmicro. Depending on the use phase, this manual is
aimed at other target groups:
Commissioning
▪Installation and commissioning may only be carried out by qualified electricians and system
integrators. Basic knowledge of electrical and KNX installation is assumed.
Operation
▪The operation of the commissioned panel is explained for unskilled users.
Repair
▪Under no circumstances carry out repairs to the unit yourself! If damage should occur to the
device, please contact our technical support immediately, see 9.3 Technical support.
2 Intended use
Depending on the software used, the Controlmicro serves as control unit for the entire KNX
installation across rooms. It thus also serves as a status display. The device must be operated
within the scope of the technical data and instructions given in this manual. Keep the device
away from moisture, dirt and dust to prevent damage to the device.
The following applications belong to the intended use:
▪Use as an operating panel (input via touch) for KNX-controlled devices
▪Intercom station for compatible door stations
− A list of all compatible door stations can be found in our FAQ:
www.peaknx.com/FAQ under the topic “compatibility”.
▪Indoor operation, note the ambient conditions, see 10 Technical data
The following applications are not part of the intended use:
▪Operation in systems requiring special monitoring, in safety-relevant areas or in hazardous
areas
▪Operation under ambient conditions that do not comply with the specifications regarding
temperature and air humidity. These include
− Outdoor operation
− Operation under direct sunlight
− Operation in environments with high dust and dirt exposure
− Operation in environments with high vibration exposure
▪Operation in a moving environment (e.g. mobile homes)
▪Operation in vessels
▪Operation of the device by small children
6
User manual, Controlmicro
▪Unauthorized repairs or changes to the device
3 Product description
The Controlmicro (short: panel) is a high-quality panel computer for wall mounting. It serves as a
display and control unit for the KNX controlled components and installations of a building.
3.1 Software
The panel can be operated both with the supplied YOUVI software and with other Windows-
compatible software.
Note: PEAKnx provides no service and no warranty for software products from other com-
panies as well as in case of OS driver updates.
3.1.1 Operating system
The operating system used is Microsoft Windows 10 IoT Enterprise LTSC. All components requi-
red for the unit to function have been pre-installed. To activate functions such as write protec-
tion, the preinstalled Tectool can be used. Further instructions can be downloaded from www.
peaknx.com in the download area. Other programs for the visualization of building information
and for building control can be installed later.
3.1.2 Operation with the PEAKnx software YOUVI
The YOUVI Basic visualization software included in the scope of delivery is used to control KNX
devices such as sockets, switches, lights, dimmers, RGB lights, heaters, blinds and shutters.
Thanks to the IP router included in the software package, the panel can run YOUVI‘s visualiza-
tion without an external server or additional bus coupler. Only the connection to the IP network
and the KNX bus (via the integrated KNX connection on the panel) is necessary. In addition to
visualization and IP router, a bus monitor is also included in the scope of delivery, which can
record and filter the KNX trac.
In addition to the basic functions for controlling KNX devices, YOUVI can be extended via mo-
dules for IP camera connection, creation of logics, control via app on the road or voice control.
Note: For the YOUVI installation, please pay special attention to the YOUVI quick reference
guide and the information on KNX project preparation to enable the automatic reading of the
project. This quick reference guide is included in the delivery.
For more information about YOUVI, see the YOUVI Help which you can access in YOUVI under
the “?”-icon. Here, you will also find the current range of functions of the software under: YOU-
VI Visu > Scope of functions.
7
User manual, Controlmicro
3.1.3 Operation with third-party software
The Windows 10 LTSC operating system pre-installed on the panel allows the use of other
Windows-based software for e.g. visualizations and door intercoms. Depending on the software
used, the functional scope of the panel can be expanded considerably. A list of compatible soft-
ware can be found in the FAQs:
www.peaknx.com/FAQ, topic “compatibility”.
Further instructions such as for setting up the panel as a door station can be found in the PE-
AKnx download area: https://www.peaknx.com/de/downloads.
3.2 Product features
▪LED backlit full color TFT display, 1200 x 1920 pixels
▪8 inch touchscreen, projected capacitive (PCAP)
▪Integrated speakers and microphone
▪Fieldbus connection for KNX
▪100 Mbit-Ethernet connection
▪Wi-Fi/Bluetooth: 2.4 GHz/4.0
▪Operating system: Windows 10 IoT Enterprise LTSC
▪No fan, thus silent
▪Integrated anti-theft protection
▪Integrated sensors for CO2 and brightness (adaptive screen brightness)
▪Ambient lighting
▪Proximity sensor (screen is switched on when approached)
▪24 V DC supply; 2.5 A
▪Maximum power consumption under full load: 20 W
▪Power consumption, idle: 5 W, Server operation without LCD: 3 W
▪Ambient temperature 0 to 35 °C
▪Installation
− in landscape format or
− in portrait format (logo is located at the bottom edge)
− Suitable switch box for mounting: standard screw spacing 60 mm, depth min. 35 mm
▪Protection class IP20
8
User manual, Controlmicro
3.3 Device components
Position Description
A1 Panel with touchscreen
A2 Mounting plate; Suitable switch box for mounting:
standard screw spacing 60 mm, depth min. 35 mm
9
User manual, Controlmicro
3.4 Touch panel elements
Position Description
1 Microphone
2 Proximity sensor
3 Brightness sensor
4 Touchscreen
5 MicroSD card slot
6 Screw holes for fixing the panel
7 USB 2.0 Type C
8 Status LED: red: panel is shut down, green: panel is switched on
10
User manual, Controlmicro
3.5 Mounting plate
^ r q e l o =k ^ j b
` o b ^ q fl k =a ^ q b
p r mb o s fp l o =k ^ j b
` e b ` h =a ^ q b
p ` ^ i b t b fd e q k r j _ b o p e b b q
q fq i b
p r _ q fq i b
3.6 Notes on the panel‘s ports
3.6.1 KNX terminals
A terminal of the following specification is used for the KNX connection:
KNX WAGO 243 211, conductor diameter: 0.6 - 0.8 mm.
Note: The KNX fieldbus can only be used with PEAKnx software.
Note: The device cannot be used as a line coupler for KNX lines!
Indice
