Peco WavePRO T2500 Manuale utente
WavePRO™ Wireless Programmable
T2500 Thermostat & R2500 Receiver
Model K2500-001
2
Thank you for choosing the PECO WavePROTM Wireless System (Model K2500-001).
The PECO WavePRO Wireless System is a wireless thermostat transmitter and receiver. It is
designed for use with conventional (gas, oil, electric) or heat-pump systems. It can support up to
2-HEAT/ 2-COOL con gurations in conventional systems and 3-HEAT/ 2-COOL con gurations
in heat pump applications. The PECO WavePRO Wireless System is comprised of the wireless
T2500 Thermostat paired with the wireless R2500 Receiver. This operating manual contains
important information on operating the T2500 Thermostat and R2500 Receiver.
The T2500 Thermostat may be powered by batteries, 24 VAC, or by both. The thermostat
may be programmed for 7-day individual, 5/2-day, 5/1/1-day, or 7-day identical programmable
operation, with four time periods per day.
The R2500 Receiver is powered by 24 VAC only and is wired directly to the HVAC equipment
that it controls.
3
(Model K2500-001)
Temperature Range: 50° to 90° F (10° to 32° C)
Differential: 1° F (0.5°C)
Input Power:
T2500 Thermostat: Two AA alkaline batteries or 24 VAC, 50/60 Hz
R2500 Receiver: 24 VAC, 50/60 Hz
Output Power 24 VA (Pilot Duty)
Wireless Type: 902 to 928 MHz Band, Frequency Hopping Spread Spectrum (FHSS)
Wireless Range: 100 feet (30.48 meters) typical reliable range in open air
Operation Temperature: 0° to 120° F (-17° to 48°C)
Shipping Temperature: -20° to 130°F (-28°to 54°C)
Operating Humidity: 5% to 95% RH, non-condensing
Physical dimensions:
T2500: 4.5”H x 5.75” W x 1.1”D
R2500: 4.8”H x 3.8”W x 1.3”D
4
The PECO WavePRO Wireless System ..............................................................................................
Front panel display reference: T2500 Thermostat ...............................................................................
Button operation ..................................................................................................................................
The T2500 Display .............................................................................................................................
The T2500 Display menus .................................................................................................................
Set the time and day .........................................................................................................................
Select the Fahrenheit or Celsius temperature ...................................................................................
Programming the T2500 ....................................................................................................................
Custom program ................................................................................................................................
Custom program: Copy feature .........................................................................................................
Overriding the program ......................................................................................................................
5
• READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO OPERATE THIS THERMOSTAT
AND RECEIVER.
• FOLLOW THE WAVEPRO WIRELESS INSTALLATION INSTRUCTIONS BEFORE PROCEEDING.
• Contact a qualied service person if at any time your system does not operate properly.
• Use care to avoid static discharge to the thermostat and receiver.
• Failure to observe safety information and comply with instructions could result in PERSONAL INJURY,
DEATH AND/OR PROPERTY DAMAGE.
• To avoid electrical shock or damage to equipment, disconnect power before installing or servicing and use
only wiring with insulation rated for full thermostat operating voltage.
• To avoid potential re and/or explosion do not use in potentially ammable or explosive atmospheres.
• This product, when installed, will be part of an engineered system whose specications and performance
characteristics are not designed or controlled by PECO. You must review your application and national
and local codes to assure that your installation will be functional and safe.
• Retain these instructions for future reference.
IMPORTANT NOTE: This thermostat was shipped with factory default settings. Your thermostat’s installer
may have congured the thermostat differently from the factory-default settings, and may have modied
or disabled certain features. Contact the installer or a service technician if you have questions about the
thermostat’s conguration.
6
Following are the T2500 Thermostat and.
SYSTEM button
Display
FAN button
UP ▲and
DOWN ▼
buttons
PROGRAM
button
7
The SYS (system) button is used to control the operating mode of the T2500. Press the
SYS button once to light up the menu options, as described below. Continue pressing
SYS button to scroll through menu options. As you scroll, the menu option being accessed
(operating mode) will ash. To select that option, allow the display to automatically time
out. The T2500 saves the “ashing” option and switches the thermostat to the selected
operating mode. The SYS modes are:
HEAT – Indicates the system is in heating mode.
COOL – Indicates the system is in cooling mode.
AUTO – Indicates the system will automatically changeover between heating
and cooling modes as the room temperature varies.
OFF – Disables thermostat outputs.
SETBACK –Indicates the heating or cooling system is operating in manual setback
mode. (To appear, SETBACK must be selected in “Advanced conguration.” See the
“PECO WavePRO Wireless System Installation Guide”).
The SYS button is also used to scroll through the Service Menu in advanced
conguration.(see “Advanced conguration” in the “PECO WavePRO™ Wireless
System Installation Guide”).
i
8
The FAN button is used to control the fan mode. Pressing FAN will light up the two fan
mode options described below. Press FAN to scroll through the options. As you scroll,
the ashing option is automatically selected. The T2500 Thermostat times out and
automatically saves the ashing option. The modes are:
ON – Turns on continuous fan, even if no demand exists for heating
or cooling.
AUTO – Sets fan cycles with demand for heating and cooling.
The PROG (program) button is used to program the T2500. Press PROG button once
to light up ve program mode options, described below. Press ▲or ▼buttons to scroll
through the options. As you scroll, the option being accessed will ash. To select the
ashing option (e.g.,”CLOCK”), press PROG again, and an associated submenu appears.
Press ▲or ▼to scroll through the submenu options. Press PROG button to select the
desired option. The ve program mode options are:
CLOCK –Sets the current time and day (see “Set the time and day”).
°F / °C –Sets temperature display to Fahrenheit or Celsius. Default setting is Fahrenheit
(see “Select the Fahrenheit or Celsius temperature”).
9
SET – Initiates the time and temperature schedule for a particular day or group of days.
Allows you to reset the thermostat to the factory default factory settings program. (see
“Programming the T2500”).
COPY – Copies one day’s schedule to another day or to another group of days (see
“Programming the T2500”).
HOLD – Puts the thermostat in Temporary or Permanent Hold mode. Overrides your
programmed settings but does not lose them (see “Overriding the program”).
Press the SYS button to exit the program menu at any time.
The up ▲and ▼down buttons are used to create a temporary override, thereby increasing
or decreasing the current setpoint, or to access the Service Menu. The buttons are also
used with the PROG button to select various programming options.
i
10
Figure 1 below illustrates the various display menus in the T2500 display. The menus are:
System Mode Display Programming Commands Program Override Commands
Temperature Display Time Period Indicators Service Indicator
Time & Day Display Fan Operation Indicators Keypad Lockout
Battery Indicator
Figure 1.
T2500
Display.
Altri manuali per WavePRO T2500
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Peco Termostato
Peco
Peco TA158-100 Guida all'installazione
Peco
Peco TA155 Manuale utente
Peco
Peco Peco TW205 Manuale utente
Peco
Peco TA167-006 Manuale utente
Peco
Peco T168 Manuale utente
Peco
Peco T190 Manuale utente
Peco
Peco TA180 Manuale utente
Peco
Peco PERFORMANCE PRO MULTI-FAN Manuale utente
Peco
Peco WAVE WIRELESS TW205-206 Manuale utente
Peco
Peco T180 Manuale utente
Peco
Peco WavePRO T2500 Manuale utente
Peco
Peco T190 Manuale utente
Peco
Peco TW180 Manuale utente
Peco
Peco TB158 Manuale utente
Peco
Peco TH170 Manuale utente
Peco
Peco T168 Manuale utente
Peco
Peco Peco RW205 Manuale utente
Peco
Peco Performance pro T4000 series Manuale utente
Peco
Peco WavePRO K2500-001 Manuale utente
Peco
Peco T8532-IAQ Manuale utente
