Peerless-AV DS-LEDVST Series Manuale utente

12022-01-13 #:146-9069-1

DS-LEDVST Series

*Actual conguration may vary

ENG

22022-01-13 #:146-9069-1

Symbols

ENG

WARNING

ENG

Do not overtighten screws.

ENG

Tools Needed for Assembly.

ENG

5/32"

(4mm)

3/8"

(10mm)

Skip to step.

ENG

Wear anti-static gloves.

ENG

ENG To properly tighten screws: Tighten until screw

head makes contact, then tighten another 1/2

turn. Do not overtighten screws.

+1/2

ENG - This product is designed to be installed on plywood walls. Hardware is included for plywood installation.



walls. Before installing make sure the supporting surface will support the combined load of the equipment and

hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.

Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift

and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to



call customer care at 1-800-865-2112.

WARNING

Screws must get at

least three full turns



ENG

5mm

32022-01-13 #:146-9069-1

Parts List

Description

Acolumn

Bhorizontal extrusion

Cvertical spacer

Dhorizontal spacer

E3mm allen wrench two-tip T-handle

Fwall plate shim

Gconnector plate

HM5 x 5mm set screw

IM5 x 8mm socket screw

J#14 x 1.75" wood screw

K2.5mm allen wrench

LM5 x 40mm screw

MM8 x 12mm screw

column B

horizontal extrusion

Parts (Before beginning, make sure you have all parts shown below).

Refer to parts list included with your model.

ENG

vertical

spacer

M5 x 5mm

set screw

horizontal

spacer

connector

plate

M5 x 8mm

wall plate

shim

3mm allen wrench

two-tip T-handle

#14 x 1.75" wood screw

2.5mm allen wrench

M5 x 40mm

M8 x 12mm screw

42022-01-13 #:146-9069-1

1-1

Optional: If connecting two top horizontal extrusions,



ENG

1-2

Use extrusion connectors to connect top horizontal extrusions.

ENG

G (4) H (8)

1-3

Replace one hook-on bracket in between connected extrusions and tighten hardware.

ENG E

Remove and save hardware.

ENG

Use saved hardware.

ENG

52022-01-13 #:146-9069-1

1-4

Secure additional hook-on brackets for top horizontal extrusions.

ENG

62022-01-13 #:146-9069-1

2-1

Optional: If connecting two bottom horizontal extrusions,



ENG

2-2

Use extrusion connectors to connect bottom horizontal extrusions.

ENG

H (8)

G (4)

Remove and save hardware.

ENG

72022-01-13 #:146-9069-1

2-3

Replace one hook-on bracket in between connected extrusions.

ENG

Use saved hardware.

ENG

82022-01-13 #:146-9069-1

ENG - When installing Peerless wall mounts on a wood stud wall covered with plywood, verify that the wood

studs are a minimum of 2" x 4" nominal size and plywood is a minimum Grade BC, 1/2" (13 mm) thick. Plywood

may be covered by gypsum board (drywall) up to 5/8" thick.

WARNING

3-1

ENG When installing more than one display to a wood stud wall reinforced with plywood (minimum Grade BC, 1/2"

thick) that may be covered in gypsum board (drywall) up to 5/8" thick, the mounting surface must be plumb

(+/- .25”) across the height of the video wall and straight (+/- .25”) across the width of the video wall.

92022-01-13 #:146-9069-1

3-2

Use a laser level to keep mounting holes

level.

ENG

2.0"

(51mm)

display tile

7/8" (22mm) minimum

for mounting clearance

10 2022-01-13 #:146-9069-1

3-3

Level top horizontal extrusion and mark

mounting holes on plywood (must be

minimum Grade BC, 1/2" (13mm) thick).

ENG

Indice

Altri manuali peerless-AV Rack e supporto

peerless-AV

peerless-AV PLCK-UNL Guida

peerless-AV

peerless-AV HA747PU Manuale utente

peerless-AV

peerless-AV SPL724 Manuale utente

peerless-AV

peerless-AV ACC558 Manuale utente

peerless-AV

peerless-AV MOD-FPP2KIT200 Manuale utente

peerless-AV

peerless-AV PSTK-600 Manuale utente

peerless-AV

peerless-AV TruVue TRA740 Manuale utente

peerless-AV

peerless-AV PA740 Guida

peerless-AV

peerless-AV AEC Manuale utente

peerless-AV

peerless-AV ACC-DSV745 Guida

peerless-AV

peerless-AV DS-LEDM Series Manuale utente

peerless-AV

peerless-AV MIS-ACC201 Guida

peerless-AV

peerless-AV PRGS-ALU0811 Manuale utente

peerless-AV

peerless-AV HT642-003 Guida

peerless-AV

peerless-AV SF670 Manuale utente

peerless-AV

peerless-AV PLCK-1 Manuale

peerless-AV

peerless-AV PR560M Manuale utente

peerless-AV

peerless-AV SPL746 Manuale utente

peerless-AV

peerless-AV dvLED Series Manuale utente

peerless-AV

peerless-AV Smart-Mount SP850-UNL Manuale utente

peerless-AV

peerless-AV SHARP NEC WMK-7598T Manuale utente

peerless-AV

peerless-AV PLAV 70-UNL Guida

peerless-AV

peerless-AV DS-C555-4X3 Manuale utente

peerless-AV

peerless-AV SA752PU Manuale utente

Manuali Rack e supporto popolari di altre marche

Salamander

Salamander Acadia AC/W/L400/WH Manuale utente

Fohhn

Fohhn VAT-09 Guida utente

ricoo

ricoo FS0522 Manuale utente

AMSOIL

AMSOIL BMK-22 Guida rapida

Kargo Master

Kargo Master 48220 Manuale utente

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuale utente

ricoo

ricoo S1222 Manuale utente

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuale utente

VidaBox

VidaBox VB MNT FFS2 Manuale utente

Welch Allyn

Welch Allyn 48960 Manuale utente

Arkon

Arkon CM035-ST-2 Manuale utente

PROEL

PROEL PLWIN60C Manuale utente

Agilent Technologies

Agilent Technologies E2609B Manuale utente

Mustang

Mustang MV-ARM4 Manuale utente

Mounting Solutions

Mounting Solutions WRM-320 Manuale utente

Pyle

Pyle PMKSPAD1 Manuale utente

ShelterIt

ShelterIt 21208 Manuale utente

SPL

SPL RackPack?4 1040 Manuale utente

peerless-AV DS-LEDVST Series Manuale utente

Manuali Rack e supporto popolari di altre marche