PEERLESS SR1M Guida
ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.com
This product is UL Listed. It must be
installed by a qualified professional
installer.
Installation and Assembly: 32" - 65" Flat Panel TV Cart
Models: SR1M, SR560M
Max UL Load Capacity:
150 lb (68 kg) screen
50 lb (22.7 kg) per shelf
2 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
NOTE: Read entire instruction sheet before you start installation and assembly.
Table of Contents
Parts List............................................................................................................................................................................ 3, 4
Assembling Cart.....................................................................................................................................................................5
Attaching Universal Adapter Plate or DedicatedAdapter Plate........................................................................................... 10
Installing Adapter Brackets ..................................................................................................................................................11
Cord Management............................................................................................................................................................... 13
Tools Needed for Assembly
•level
• phillips screwdriver
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, and fully understands
these instructions.
• Never exceed the Maximum UL Load Capacity on page 1.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• The cart is not affixed or secured to the floor, and may therefore tip over and/or fall if screen and/or stand is shaken
or hit. Always monitor children and do not let children play alone around stand as they could get hurt by a falling
screen. Not recommended for use in areas with heavy traffic.
WARNING
3 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
SR1M SR560M
Description Qty. Part Number Part Numbe
r
A
screen mount bracket 1 201-1156 201-1156
Bhook plate 1 201-1157 201-1157
Cshelf support 1 201-1158 201-1158
Dbase 1 009-1223 009-1223
Euniversal plate 1 N/A 201-1110
Fadapter bracket 2 N/A 201-1510
Gupright 1 580-1180 580-1180
Htop cover 1 590-1210 590-1210
I1/4-20 x 12mm decorative screw 14 520-2325 520-2325
J1/4-20mm nut 10 530-1050 530-1050
L3/8-16 x 2.5" socket screw 3 520-9550 520-9550
M7/32" allen wrench 1 560-9715 560-9715
N4 mm allen wrench 1 560-9646 560-9646
O8/32 nylock nut 6 530-1038 530-1038
Pshelf pan 1 009-1225 009-1225
Q6 mm allen wrench 1 560-9716 560-9716
Rleft leg 1 009-1296 009-1296
Sright leg 1 009-1295 009-1295
Twheel caster 2 600-0044 600-0044
Uwheel caster/brake 2 600-0045 600-0045
V
joint connector nut 4 530-1037 530-1037
W
3/8-16 x 1.5" screw bolt 4 520-1329 520-1329
X
M10 x .402 ID lock washer 3 540-9424 540-9424
Z3/16 allen wrench 1 560-0071 560-0071
A
A
M5 x 12 mm socket pin screw 4 N/A 520-1064
BB M5 x 25 mm socket pin screw 4 N/A 520-1122
CC
M6 x 12 mm socket pin screw
4
N/A
520
-
1150
Parts List
CC
M6 x 12 mm socket pin screw
4
N/A
520 1150
DD M6 x 25 mm socket pin screw 4 N/A 520-1211
EE M8 x 12 mm socket pin screw 4 N/A 520-1724
FF M8 x 25 mm socket pin screw 4 N/A 520-1101
GG M5/M4/M6 washer 4 N/A 580-1398
HH spacer 4 N/A 540-1059
II M10 x 15 mm socket screw 4 520-9262 520-9262
4 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
Z
R
S
N
G
D
C
V
U
T
P
H
X
MW
L
II
I
J
O
Q
Parts List continued
Some parts may appear slightly different than illustrated.
Universal Adapter Plate, Brackets and Hardware included with model SR560M only
E
F
A
B
BB CC DD EE FF HH
GG
AA
5 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
Insert right leg (S) into base housing (D) as shown in fig. 1.1. Then align holes in right leg with holes in base
housing (D). Fasten base housing to right leg using two 3/8-16 x 1.5" bolts (W) and two joint connectors (V). Tighten
using 3/16"allen wrench (Z) and 7/32"allen wrench (M) as shown in fig.1.2.
NOTE: Left and right legs can be identified by looking at the cart from the front.
Repeat for left side with left leg (R).
1
S
W
fig. 1.2
V
fig. 1.1
D
S
FRONT OF CART
FRONT OF LEG
2Insert casters (U &T) into holes of support legs (R &S) and hand thread to secure. Attach casters with brake (U)to
the back of left and right support legs (R &S). Attach casters without brake (T)to front of support legs as shown.
NOTE: Lock brakes on casters to avoid sudden movements during installation.
R
UT
S
HAND THREAD
HOLD WHEEL
6 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
L
D
G
X
fig. 3.2
CORD MANAGE-
MENT HOLES
fig. 3.1
Attach upright (G) to base (D), as shown in fig 3.1 using three 3/8-16 x 2.5" socket screws (L) and M10 x .402ID
lock washers (X). Tighten screws using 7/32" allen wrench (M).
NOTE: Be sure cord management holes are in the configuration shown in fig 3.2.
3
Loosely attach four 1/4-20 x 12 mm screws (I) and 1/4-20 nuts (J) to shelf support (C).
4
C
I
J
7 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
Slide shelf support (C) onto upright (G) so that 1/4-20 nuts (J) slide into slots of upright (G) as shown in figure 5.1
and detail 1. Slide shelf support to desired height, level, then tighten 1/4-20 x 12mm screws (I) using 4 mm allen
wrench (N).
NOTE: MAXIMUM OF TWO SHELVES
Max height of top shelf is 34" from base.
Max height of second shelf is 28" from base.
SLOT
fig. 5.1
C
5
DETAIL 1
J
G
8 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
Attaching Metal Shelf
Attach shelf pan (P) to shelf support (C) using six 8/32 nylock nuts (O) as shown below. Use an adjustable wrench
to tighten six 8/32 nylock nuts (O).
O
P
C
• This shelf is intended for use with equipment weighing
NO more than 50 lbs. (22.7 kg) that fits evenly accross
the surface of shelf pan (P). Use with other equipment
may result in instability and cause personal injury or
property damage.
WARNING
6
9 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
Insert two 1/4-20 x 12 mm screws (I) into screen
mount bracket (A), leaving 3/16" of exposed thread
as shown in figure 10.1 and detail 3.
H
G
Snap top cover (H) onto upright (G). 10
9
fig. 10.1
Loosely attach six 1/4-20 x 12 mm screws (I) and
1/4-20 nuts (J) to screen mount bracket (A).
7Slide screen mount bracket (A) onto upright (G) so
that 1/4-20 nuts (J) slide into slots of upright (G) as
shown in figure 8.1 and detail 2. Slide screen mount
bracket to desired position, level, then tighten 1/4-20
x 12 mm screws (I) using 4 mm allen wrench (N).
8
IA
JA
G
SLOT
fig. 8.1
I
DETAIL 3
3/16"
DETAIL 2
J
G
I
A
10 of 13 ISSUED: 01-10-07 SHEET #: 009-9039-15 05-23-12
NOTE:Refer to instructions included with
Dedicated Adapter Plate for assembly to screen.
Once attached, proceed to step 11.
Attach Universal Plate (E) or Dedicated Adapter
Plate to hook plate (B) using four M10 x 15 mm
socket screws (II). Tighten screws using 6 mm allen
wrench (Q).
Attaching Universal Adapter Plate or Dedicated Adapter Plate
Attach hook plate (B) to screen mount bracket (A).
B
A
I
II
2° Backward Tilt 5° Forward TiltNo Tilt
B
UNIVERSAL PLATE
OR
DEDICATED ADAPTER PLATE
(SOLD SEPARATELY, NOT EVALUATED BY UL)
Insert two 1/4-20 x 12 mm screws (I) into holes indicated below for desired screen orientation. Tighten all screws
using 4 mm allen wrench (N).
E
B
11
II
II
12
13
Altri manuali per SR1M
2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali PEERLESS Carrello da esterno
