PEP Modular Computers CP331 Manuale utente

CP331

ESRC Flat-Panel

USXGA Graphic Controller

Manual ID 19947, Rev. Index 0200

Feb 00

The product described in this manual is

in compliance with all applied CE stan-

dards.

Preface CP331

Revision History

Imprint

reserved. This manual may not be copied, photocopied, repro-

duced, translated or converted to any electronic or machine-

readable form in whole or in part without prior written approval of

PEP Modular Computers GmbH.

This manual was realized by: TPD/Engineering, PEP Modular Computers GmbH.

Manual/Product Title: CP331

Manual ID Number: 19947

Rev.

Index Brief Description of Changes Board Index Date of

Issue

0100 Initial Issue 0000 Apr. 99

0200 General update 0000 Feb. 00

Disclaimer:

PEP Modular Computers GmbH rejects any liability for the cor-

rectnesss and completeness of this manual as well as its suitabil-

ity for any particular purpose.

CP331 Preface

Table of Contents

Preface

Revision History................................................................................................... 0 - 2

Imprint...................................................................................................................0 - 2

Table of Contents................................................................................................. 0 - 3

Proprietary Note................................................................................................... 0 - 7

Trademarks.......................................................................................................... 0 - 7

Explanation of Symbols ....................................................................................... 0 - 8

For Your Safety.................................................................................................... 0 - 9

High Voltage Safety Instructions...................................................................... 0 - 9

Special Handling and Unpacking Instructions ................................................. 0 - 9

General Instructions on Usage...................................................................... 0 - 10

Two Years Warranty.......................................................................................... 0 - 11

Chapt 1

Chapter

1. Introduction ................................................................................................. 1 - 3

1.1 System Overview ....................................................................................... 1 - 3

1.2 Board Overview ......................................................................................... 1 - 4

1.2.1 Board-Specific Information ............................................................. 1 - 4

1.2.2 Board Variants ................................................................................ 1 - 4

1.2.3 PanelLink Adapter Module ............................................................. 1 - 5

1.2.4 System-Relevant Information ......................................................... 1 - 5

1.3 Board Diagrams ......................................................................................... 1 - 7

1.3.1 Functional Block Diagram .............................................................. 1 - 7

1.3.2 Front Panels ................................................................................... 1 - 8

1.3.3 Board Layouts ................................................................................ 1 - 8

1.4 Technical Specifications .......................................................................... 1 - 11

Preface CP331

1.5 Applied Standards .................................................................................... 1 - 12

1.5.1 CE Compliance ............................................................................. 1 - 12

1.5.2 Mechanical Compliance ................................................................ 1 - 12

1.5.3 Environmental Tests ..................................................................... 1 - 12

1.6 Related Publications ................................................................................ 1 - 12

1.6.1 CompactPCI Systems/Boards ...................................................... 1 - 12

Chapter

2. Functional Description ................................................................................ 2 - 3

2.1 General Information ................................................................................... 2 - 3

2.2 Specifics ..................................................................................................... 2 - 3

2.3 Functional Block Diagram .......................................................................... 2 - 4

2.4 Board Interfaces ......................................................................................... 2 - 5

2.4.1 Embedded-Memory Interface ......................................................... 2 - 5

2.4.2 CRT Interface .................................................................................. 2 - 5

2.4.3 Front-End TTL Interfaces ................................................................ 2 - 6

2.4.4 Internal Flatpanel Interfaces ........................................................... 2 - 8

2.4.5 PCI Interface ................................................................................. 2 - 10

2.4.6 Rear-I/O TTL Interface .................................................................. 2 - 10

2.5 Video Resolutions .................................................................................... 2 - 11

Chapter

3. Installation ................................................................................................... 3 - 3

3.1 Hardware Installation ................................................................................. 3 - 3

3.1.1 Supported Monitors ......................................................................... 3 - 3

3.2 Software Installation ................................................................................... 3 - 4

3.2.1 Driver Installation ............................................................................ 3 - 4

3.2.2 BIOS Configuration ......................................................................... 3 - 4

CP331 Preface

Chapter

4. Configuration .............................................................................................. 4 - 3

4.1 LVDS Supply Voltage ................................................................................ 4 - 3

4.2 BIOS Configuration .................................................................................... 4 - 3

4.3 Panel Selection ......................................................................................... 4 - 4

This page was intentionally left blank.

CP331 Preface

Proprietary Note

This document contains information proprietary to

PEP Modular Computers

. It may not be

copied or transmitted by any means, disclosed to others or stored in any retrieval system or

media, without the prior written consent of

PEP Modular Computers GmbH

or one of its autho-

rized agents.

The information contained in this document is, to the best of our knowledge, entirely correct.

However,

PEP Modular Computers

cannot accept liability for any inaccuracies, or the conse-

quences thereof, nor for any liability arising from the use or application of any circuit, product,

or example shown in this document.

PEP Modular Computers reserve the right to change, modify, or improve this document or the

product described herein, as seen fit by

PEP Modular Computers

without further notice.

Trademarks

PEP Modular Computers

, the

PEP

logo and, if occurring in this manual, “CXM” are trade

marks owned by

PEP Modular Computers GmbH

, Kaufbeuren (Germany). In addition, this

document may include names, company logos and trademarks, which are registered trade-

marks and, therefore, proprietary to their respective owners.

Preface CP331

Explanation of Symbols

CE Conformity

This symbol indicates that the product described in this manual

is in compliance with all applied CE standards. Please refer

also to the section “Applied Standards” in this manual.

Caution, Electric Shock!

This symbol and title warn of hazards due to electrical shocks

(> 60V) when touching products or parts of them. Failure to

observe the precautions indicated and/or prescribed by the law

may endanger your life/health and/or result in damage to your

material.

Please refer also to the section “High Voltage Safety Instruc-

tions” on the following page.

Warning, ESD Sensitive Device!

This symbol and title inform that electronic boards and their

components are sensitive to static electricity. Therefore, care

must be taken during all handling operations and inspections of

this product, in order to ensure product integrity at all times.

Please read also the section “Special Handling and Unpacking

Instructions” on the following page.

Warning!

This symbol and title emphasize points which, if not fully under-

stood and taken into consideration by the reader, may endanger

your health and/or result in damage to your material.

Note...

This symbol and title emphasize aspects the reader should read

through carefully for his or her own advantage.

PEP Advantage

This symbol and title emphasize advantages or positive aspects

of a product and/or procedure.

CP331 Preface

For Your safety

Your new

PEP

product was developed and tested carefully to provide all features necessary

to ensure the renown electrical safety requirements. It was also designed for a long fault-free

life. However, the life expectancy of your product can be drastically reduced by improper treat-

ment during unpacking and installation. Therefore, in the interests of your own safety and of

the correct operation of your new

PEP

product, you are requested to conform with the follow-

ing guidelines.

High Voltage Safety Instructions

Special Handling and Unpacking Instructions

• Do not handle this product out of its protective enclosure while it is not used for operational

purposes, unless it is otherwise protected.

• Whenever possible, unpack or pack this product only at EOS/ESD safe work stations.

Where safe work stations are not guaranteed, it is important for the user to be electri-cally

discharged before touching the product with his/her hands or tools. This is most easily

done by touching a metal part of your system housing.

• It is particularly important to observe standard anti-static precautions when changing piggy-

backs, ROM devices, jumper settings etc. If the product contains batteries for RTC or

memory back-up, ensure that the board is not placed on conductive surfaces, including

anti-static plastics or sponges. They can cause short circuits and damage the batteries or

tracks on the board.

Warning!

All operations on this device must be carried out by sufficiently

skilled personnel only.

Caution, Electric Shock!

However, serious electrical shock hazards exist during all

installation, repair and maintenance operations with this prod-

uct. Therefore, always unplug the power cable to avoid expo-

sure to hazardous voltage.

Before installing your new

PEP

product into a system always

ensure that your mains power is switched off. This applies also

to the installation of piggybacks.

ESD Sensitive Device!

Electronic boards and their components are sensitive to static

electricity. Therefore, care must be taken during all handling

operations and inspections of this product, in order to ensure

product integrity at all times.

Preface CP331

General Instructions on Usage

• In order to maintain

PEP’s

product warranty, this product must not be altered or modified in

any way. Changes or modifications to the device, which are not explicitly approved by

PEP

Modular Computers

and described in this manual or received from

PEP

Technical Support

as a special handling instruction, will void your warranty.

• This device should only be installed in or connected to systems that fulfill all necessary

technical and specific environmental requirements. This applies also to the operational

temperature range of the specific board version, which must not be exceeded. If batteries

are present, their temperature restrictions must be taken into account.

• In performing all necessary installation and application operations, please, follow only the

instructions supplied by the present manual.

• Keep all the original packaging material for future storage or warranty shipments. If it is

necessary to store or ship the board please re-pack it as nearly as possible in the manner

in which it was delivered.

• Special care is necessary when handling or unpacking the product. Please, consult the

special handling and unpacking instruction on the following page of this manual.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali PEP Modular Computers Controllori

PEP Modular Computers

PEP Modular Computers CP345 Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente