Pepperl+Fuchs Ecom Lite-Ex PL 10e H Manuale utente
1
Operating Instructions | Bedienungsanleitung
Notice d‘utilisation | Istruzioni per l‘uso
Instrucciones de uso | Manual de instruçoes
Intrinsically Safe Headlamp Lite-Ex®PL 10e H
Zone 0 / 20
2
English.....................................................Page ............... 3
Deutsch ...................................................Seite ............. 11
Français ...................................................Page ............. 20
Italiano.....................................................Page ............ 28
Español....................................................Página ......... 37
Português ................................................Sida .............. 45
3
Note:
The current operating instructions, the EU Declaration of
Conformity can be downloaded from the relevant product
page at www.ecom-ex.com, www.pepperl-fuchs.com,
www.pepperl-fuchs.com or alternatively they can be
requested directly from the manufacturer.
Content
1. Safety instructions....................................................... 4
2. Technical specifications .............................................. 4
3. Functional description / operating instructions........... 4
3.1 Assembly of the Lite-Ex® PL 10e H.......................... 5
3.2 Getting started........................................................... 5
3.3 Battery replacement.................................................. 5
3.4 Cleaning the ring switch............................................ 6
3.5 Bulb replacement ...................................................... 7
3.6 Replacing the protective disc.................................... 7
4. Repairs ........................................................................ 8
5. Cleaning, maintenance and storage............................ 8
6. Disposal....................................................................... 9
7. Warranty and liability ................................................... 9
8. EU Declaration of Conformity.................................... 10
9. EU-type examination certificate................................ 10
4
1. Safety instructions
Caution! Strong light may blind other people.
• Do not look directly into the light.
• Do not shine the light directly into the eyes of other
people.
2. Technical specifications
Ambient temperature Ta: -20 ... +50°C
Storage temperature: -30 ... +60°C
Batteries / power supply:3 x LR03 (see Ex-Safety
Manual, table with approved
batteries)
Lamp: High-performance LED
Luminosity: approx. 3.000 lx
(at a distance of 1m / 6° Optik)
approx. 1800 lx
(at a distance of 1 m / 25° Optics)
Luminous flux: 64 lm
Operating time: approx. 55 hours
(continuous operation)
Dimensions: 60 x 87 x 69 mm
(H x L x W)
Weight: approx. 180g
(with headband)
IP protection class: IP 65/67
ESD protection: Anti-static housing
CE-designation:
‡
0102
3. Functional description / operating instructions
Please read these operating instructions carefully so
that you are familiar with, and are able to use, all of the
functions of your Lite-Ex® PL 10e H. For your own safety
and information please read the instructions on the following
pages carefully!
5
3.1 Assembly of the Lite-Ex® PL 10e H
3.2 Getting started
The supplied batteries must be inserted to begin with
(outside the Ex-area). In order to be able to use the lamp
in the Ex-area it must be ensured that the lamp head and
the body of the lamp are screwed together tightly. The lamp
can then be switched on by lightly rotating the yellow ring
switch clockwise.
3.3 Battery replacement
The batteries should be replaced if the level of luminance is
no longer deemed to be satisfactory.
It is advisable to change all 3 batteries at the same time.
Only the appropriate, approved types of batteries may be
used (see Ex-Safety Manual, table with approved batteries).
To replace the batteries turn the left-hand side cap (which
bears the „ecom“ inscription) in the direction of the arrow
and then remove the entire battery adapter (see fig. 2).
You can then remove and exchange the batteries.
After inserting the new batteries (while observing the correct
Disc
Battery adapter
Cap
Fig. 1
Flashlight body
Ring switch
Sealing ring
22.5 x 1.5
LED housing
Sealing ring 22.5 x 2.0
Lamp head
Sealing ring 27.0
x 1.0
6
polarity) the battery adapter can be reinserted (please
observe the guides in the adapter and battery compartment
when doing this). Then screw the cap back on.
Please make sure the lamp has been screwed together
completely before switching it on again.
Fig. 2
Battery replacement
• Only use type-tested batteries
(see Ex-Safety Manual, table in section 6)
• Always replace all batteries simultaneously.
• Pay attention to the correct polarity.
• Dispose of depleted batteries in an appropriate and
environmentally friendly manner!
• When changing the batteries examine the threads and
seals for cleanliness and signs of damage.
• If you notice any spilled electrolyte when changing the
battery, do not take the unit into the Ex-area, but send it
to the manufacturer for inspection.
3.4 Cleaning the ring switch
A non-contacting ring switch is used to switch on the Lite-
Ex®PL 10e H (see 3.2). Dirt and moisture do not impair
the switching function. The ring switch is easy to clean if
excessive amounts of dirt and grime have made it dicult to
turn. Start by unscrewing the lamp head. The ring switch can
now be removed and cleaned. When it has been cleaned,
7
replace the ring switch and rotate it until it engages firmly in
place (the line marking on the ring switch must be located
opposite the circular marking on the lamp body).
The lamp head can then be screwed back onto the lamp.
3.5 LED replacement
The Lite-Ex®PL 10e H is equipped with a long-life LED
bulb. Under normal conditions it is not necessary to
change the LED. If, however, the lamp becomes defective
or its brightness has diminished, it should be sent to ecom
instruments for inspection or repair. The LED housing should
not be opened! Conducting repairs to the LED housing or
bulb yourself poses a risk to the safety of the lamp and is
not permitted.
3.6 Replacing the protective disc
The LED housing is protected by the surrounding housing
head and an additional protective disc, which is located
over the opening where the beam is emitted. The disc is
made of high-quality material. If, however, it should break, it
can be replaced. To do this, grasp the body of the Lite-Ex®
PL 10e H and the ring switch and then carefully unscrew
the lamp head by turning it anti-clockwise. To unscrew the
lamp head from the LED housing use an Allen key (A/F 4) to
secure the LED housing in place (see Fig. 3) and unscrew
the lamp head. The protective disc can now be replaced
(only use original protective discs from ecom). The LED
housing should then be cleaned thoroughly and the sealing
ring checked for signs of damage. If the sealing ring exhibits
any damage, it should also be replaced (the sealing ring is
set in a groove underneath the protective disc / only use
original sealing rings from ecom). When replacing the lamp
head on the LED housing make sure the seal and disc are
seated properly. After assembly no part of the seal should
be visible through the opening where the beam is emitted.
If the inner lamp head or lens has been damaged, the lamp
should be sent to the manufacturer for repair.
8
Fig. 3
4. Repairs
Repairs are to be conducted by ECOM Instruments GmbH
or service centres authorised by ECOM Instruments GmbH,
because the safety of the unit needs to be tested after
repairs are implemented.
5. Cleaning, maintenance and storage
• Only use a suitable cloth or sponge to clean the unit.
• Do not use any solvents or abrasive cleaning agents
when cleaning.
• We recommended having the operation and lumen
output of the device checked by the manufacturer every
two years.
• The batteries should be taken out of the unit if it is to be
stored for extended periods.
• The storage temperature should be within the permitted
range of -30 °C to +60 °C.
• It should be observed that the electrical performance
of specific types of Zinc-Manganese Dioxide (Zn/MnO2)
batteries are limited to ambient temperatures below
the product specified ambient temperature range. The
datasheets for the specific manufacturer and type
of battery used should be consulted to see what the
recommended ambient temperature range of use is to
achieve maximum battery performance”
9
6. Disposal
Old electrical devices by ECOM Instruments GmbH
will be directed to disposal at our expense and disposed
of free of charge in accordance with European Directive
2012/19/EC. Please follow local regulations for the disposal
of electronic products. The costs associated with returning
devices to ECOM Instruments GmbH are to be borne by the
sender.
Old electrical devices should not be disposed of along with
normal or household waste.
Dispose of batteries in accordance with European
Directive 2006/66/EC. Batteries should not be disposed of
with normal or household waste. Disposal can be done via
appropriate collection points in your country.
Note: The battery used in this unit poses a fire hazard and
can cause chemical injuries if it is used improperly. Neither
the batteries nor the battery cells should be opened or
disassembled and they should not be burned or exposed
to temperatures exceeding 60 °C. In case of disposal,
the battery can be removed as described in the Ex safety
manual under point 6. The disposal regulations specified
above are also applicable for old devices.
7. Warranty and liability
Under the general terms and conditions of business,
Pepperl+Fuchs SE oers a two-year warranty for function
and materials on this product when used under the specified
operating and maintenance conditions. Batteries, LED/
Lamps and working parts are considered consumable parts
and are not covered under the warranty.
10
More detailed information regarding the General Conditions
of Delivery and Payment of Pepperl+Fuchs SE are available
at www.ecom-ex.com, www.pepperl-fuchs.com or can
alternatively be requested directly from the manufacturer.
8. EU Declaration of Conformity
The EU Declaration of Conformity is enclosed with the sales
packaging as a separate document.
Please also observe the information provided underneath
the table of contents. The current EU Declaration of
Conformity can be downloaded from the relevant product
page at www.ecom-ex.com, www.pepperl-fuchs.com.
9. EU-type examination certificate
The current EU-type examination certificate can be
downloaded from the relevant product page at www.ecom-
ex.com, www.pepperl-fuchs.com.
Altri manuali per Ecom Lite-Ex PL 10e H
1
Indice
Lingue:
Altri manuali Pepperl+Fuchs Lampada frontale
