WARNING
It is the owner and/or operators’ responsibility to study all WARNINGS,
operating, and maintenance instructions contained on the product label
and instruction manual prior to operation of this product. The owner/
operator shall retain product instructions for future reference.
The owner and/or operator are responsible for maintenance, maintaining
all decals or warning labels and while in use,
maintaining the unit in good working order. If the
owner and/or operator are not fluent in English,
the product warnings and instructions shall be
read and discussed with the operators’ native
language by the purchaser/owner or his
designee. Make sure that the operator
comprehends its contents. Safety information
shall be emphasized and understood prior to
usage. The product shall be inspected per the
operating instructions. Users of this product must
fully understand these instructions. Each person
operating this product must also be of sound mind
and body and must not be under the influence of
any substance that might impair their vision,
dexterity or judgment. Protect yourself and
others by observing all safety information.
Failure to comply with instructions could result in
personal injury and/or property damage!
If you encounter any problems or difficulties,
please contact our customer service department at:
1-800-426-1262 between 6:30 a.m. and 4:30 p.m. Pacific time.
12. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
13. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
14. Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock. Always grasp plug, not cord, when
unplugging from an outlet.
15. When operating a power tool outdoors,
use an extension cord suitable for outdoor
use. Use of a cord suitable for outdoor use
reduces the risk of electric shock.
16.
Use power tool ONLY on adequately rated circuits
to avoid overheating of electrical systems.
17.
Prevent accidental starting. Ensure switch
is in the “OFF” position before connecting to
power source and/or battery pack, picking
up or carrying the tool. Carrying power tools
with your nger on the switch or energizing
power tools that have the switch “ON” invites
accidents.
18. Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
19. Maintain labels and nameplates on the tool.
These carry important safety information. If
unreadable or missing, contact Performance
Tool® for a replacement.
20. Disconnect the plug from the power source
before any adjustments or changing bulbs.
Such preventive safety measures reduce the
risk of starting the power tool accidentally.
Unplug work light and any connected
equipment when not in use.
1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties
give specific legal rights. Except where prohibited by local law, the law of the State of Washington governs all warranties
and all exclusions and limitations of warranties and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use
and service. A defective product may be returned for a free replacement within 90 days from the date of purchase,
provided that product is returned to place of purchase immediately after discovery of defect. After 90 days and up to one
year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which our examination shall
disclose to be defective and under warranty. These warranties shall be valid only when a sales receipt showing the date of
purchase accompanies the defective product or defective part(s) being returned. For part(s) after 90 days, please remit
your request, postage prepaid to: PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be
replaced under normal use and service. These warranties shall not apply to any product or part which is used for a
purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely its
performance or reliability, nor shall these warranties apply to any product or part which has been subject to misuse,
neglect, accident or wear and tear incident to normal use and service. PERFORMANCE TOOL® does not authorize any
other person to make any warranty or to assume any liability in connection with its products. Except for warranties of title
and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied warranties of
any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability
and no implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal,
family or household use and not for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of
merchantability (and, if otherwise applicable, an implied warranty of fitness for a particular purpose), but only for the
particular qualities or characteristics, and for the duration, expressly warranted above. The laws on limitation of implied
warranties may differ from state to state, so the above limitations may not apply in all cases. PERFORMANCE TOOL®
shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any product,
or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part
shall be the repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential,
incidental or special damages may vary from state to state, so the above limitations may not apply in all cases.
© Copyright 2014 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
OWNER’S MANUAL
Item Number W2260
25 FT METAL DROP LIGHT
