Perko Power R102 Manuale utente
R102
IMPORTANT NOTICE - FOR FIRE DOOR INSTALLATIONS
REFER TO ITEM 1 IN FITTING INSTRUCTIONS
PLEASE READ FITTING INSTRUCTIONS THOROUGHLY
BEFORE INSTALLATION
• SUITABLE FOR USE WITH 4” WIDE HINGES TO GIVE MAXIMUM OPENING
•
•
• Should NOT
•
•
•
•
•
•
CHECK ALL COMPONENT PARTS AGAINST PARTS LIST.
TOOLS REQUIRED
PARTS LIST
Door Closer - x 1
Fixing Plates
Template - x 1 Allen Keys - x 2
Screws - x 12 Extractor Bolt - x 1
•
•
• Wood Chisel 1” x 7” blade
• Solid Centre Auger Bit or Spade Bits
• Awl
• Power Drill
• Tape Measure
• Pencil
• Adjustable Spanner
• Ruler
The use of a dedicated
morticing tool is highly
recommended for multiple
installations
Order code R98.XX which
includes everything you need.
Eye protectors,
Ear Defenders and a
during installation of
Allen
Key for
Adjuster Screw
IMPORTANT NOTICE
DOOR CLOSER POSITIONING
DOOR CLOSERS FITTED
TO A FIRE DOOR
• Perkopower, conforms to
Grade 3 of ANSI/BHMA A156-4
when the power latching action is
set to maximum.
• Turn adjuster screw fully to
positive (+) as explained in 9.
•
of a hinge.
• Closer and plates should be
bedded in Alfacryl FR Intumescent
Acrylic Mastic available from
Samuel Heath.
• For ADA requirements turn power
latching adjuster screw towards
negative until opening forces are
achieved.
• Ensure door is plumb, hinges are
•
• Secure template to door edge and
frame edge within 12” of a hinge
ensuring the center line is central in
• Draw a vertical line at the centre point
NB
from template centre line.
See Fig. 2
•
• The maximum distance between
these 2 vertical lines must not exceed
• At each point on the template where
the vertical lines cross the horizontal
using an awl into the door edge and
Remove template RETAIN FOR
REFERENCE
NOTE: Door can now be removed from
To achieve a maximum opening angle of 105° the center of the closer
IMPORTANT
FRAME PREPARATION FOR
FRAME PLATE
DOOR PREPARATION FOR
BODY & DOOR PLATE
NB To ensure correct operation of
the closed position.
•
accept frame plate assembly as indicated
on template
•
between plates when fitted.
• Remove excess timber between drilled
•
frame plate assembly as indicated on
template
•
between plates when fitted.
• Remove excess timber between drilled
holes to accept the closer body and door
INSTALLING CLOSER
•
•
•
•
Both allen keys must be correctly
located
•
• Secure door plate to door with six screws
IMPORTANT
With composite doors and door linings
(2.5mm) to suit fixing screws.
ADJUSTMENT -
CLOSING SPEED
• With the closer secure and now held
• Open door slightly and remove allen
•
•
•
•
Leopold Street
Birmingham
B12 0UJ, England
US Customer Service
ADJUSTMENT -
POWER LATCHING ACTION
• The power latching action can be
•
•
•
CANADA
HONG KONG
JAPAN
SINGAPORE
TAIWAN
USA
UK
AUSTRIA
BELGIUM
DENMARK
FRANCE
GERMANY
IRELAND
ITALY
LUXEMBOURG
NETHERLANDS
SPAIN
SWEDEN
SWITZERLAND
LIECHTENSTEIN
82862
EP1605126
156554
6625847
2004/0111831
2365822
2436363
GB25447175
GB2415014
EP1605126
Indice
Altri manuali Perko Power Sistema di apertura della porta
