Perle PERLE P850 Manuale di istruzioni

Perle P850

Bridge / Router

USER AND SYSTEM

ADMINISTRATION GUIDE

Part number 5500086-15

Federal Communications Commission (FCC)

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his own expense.

Warning: The user is cautioned that modifications to this equipment can void the

authority granted by the FCC to operate the equipment.

1.This equipment complies with Part 68 of the FCC rules. On the bottom of this

equipment is a label that contains, among other information, the FCC registration

number and ringer equivalence number (REN) for this equipment. If requested, this

information must be provided to the telephone company.

2. Applicable USOC jack required: RJ49C

3. If the terminal equipment P850 router causes harm to the telephone network, the

telephone company will notify you in advance that temporary discontinuance of service

may be required. But if advance notice is not practical, the telephone company will

notify the customer as soon as possible. Also, you will be advised of your right to file a

complaint with the FCC if you believe it to be necessary.

4. The telephone company may make changes to its facilities, equipment, pertains or

procedures that could affect the operation of the equipment. If this happens, the

telephone company will provide advance notice in order for you to make the necessary

modifications in order to maintain uninterrupted service.

5. If trouble is experienced with this equipment, P850, please contact TriNexus

Communications at 1-888-668-7711 for repair and warranty information. If the

equipment is causing harm to the telephone network, the telephone company may

request that you disconnect the equipment until the problem is resolved.

6. The following repairs may be made by the customer: none.

Canadian Emissions Standard ICES-003

This digital apparatus does not exceed the Class A limits for radio noise emissions

from digital apparatus as set out in the interference-causing equipment standard

entitled “Digital Apparatus”, ICES-003 of the Department of Communications.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux

appareils numériques de Classe A prescrites dans la norme sur le matériel brouilleur:

“Appareils Numériques”, NMB-003 édictée par le ministre des Communications.

NOTICE: The Canadian Department of Communications label identifies

certified equipment. This certification means that the equipment

meets certain telecommunications network protective, operational

and safety requirements. The Department does not guarantee the

equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local

telecommunication company. The equipment must also be installed

using an acceptable method of connection. The customer should be

aware that compliance with the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be made by an authorized

Canadian maintenance facility designated by the supplier. Any repairs

or alteration made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company cause to

request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical

ground connections of the power utility, telephone lines and internal

metallic water pipe system, if present, are connected together. This

precaution may be particularly important in rural areas.

CAUTION: Users should not attempt to make such connections themselves, but should

contact the appropriate electric inspection authority, or electrician, as

appropriate.

Using This Manual

This Installation and Applications Guide provides the basic information

required to initially set up and configure the P850 router. This guide is

organized into the following sections:

“

Installation

” provides instructions for installing the P850 router.

“

Typical Applications & How to Configure Them

” provides

simple configuration examples for typical applications in which the

P850 router might be used. The applications described in this

document are for example only and provide a method of quick

configuration of the P850 router. For more complete information on

all of the configuration parameters available, please refer to the PPP

Menu Reference Manual on the accompanying CD-ROM.

“

Introduction to Filtering

” provides an introduction to the pattern

filtering options of the P850 router. Several examples of typical

pattern filters are also provided.

”

Menu Trees

” provides a graphical tree type overview of the

structure of the built-in menu system of the P850 router. All of the

configuration is performed using the options provided in the menu

system. The Menu Tree is like an index to the menu options.

“

Configuration Pages

” provides a place to note the current

configuration of the P850 router for future reference. If a

replacement unit is required, the configuration may be quickly modified

to be the same as the existing unit.

“

Octet Locations on Ethernet Frames

” provides a graphical

representation of the various common Ethernet frames that the P850

router will bridge or route. When defining a pattern filter, these frame

displays indicate the offset values to use in order to define the pattern

filter correctly.

“

Servicing Information

” provides information on opening the case

and changing the straps.

Using the Electronic Reference Manual

The P850 router Reference Manuals are provided as Adobe Acrobat

PDF files on the accompanying CD-ROM. The PPP Menus Reference

File is provided individually for ease of configuration reference.

The Adobe Acrobat Reader program is included on the CD-ROM. It is

also available for most computer operating platforms from Adobe on

the Internet at: www.adobe.com.

The Reference Manual provides the following information:

•Introduction to bridging, routing, and P850 features

•Pin out references for the link modules

•List of event and alarm logs

•Expanded description of programmable filtering

The P850 PPP Menus Reference Manual provides the following

information:

•Complete description of the options for the built-in menu

system.

Contents

1 - INSTALLATION 4

Unpack the P850 4

Select a Site 4

Identify the Connectors 5

Connect to the Console 6

Make the LAN Connections 6

Make the WAN Link Connection 6

Power Up the Router 8

Mandatory Configuration 9

Setting the Link Interface Type (Universal WAN only) 10

Setting the T1/E1Parameters (T1/E1 WAN only) 11

Identify the Status LEDs 14

2 - TYPICAL APPLICATIONS & HOW TO CONFIGURE

THEM 16

Managing the P850 Using Menus 17

Conventions 18

Basic Frame Relay Configuration 19

Auto Learning the Frame Relay Configuration 21

Manual Configuration - LMI Type 22

“Quick Start” Frame Relay 23

Basic Leased Line Configuration 25

“Quick Start” PPP Leased Line Connections 25

Should You Bridge or Route? 28

Configure as an Ethernet Bridge 29

Configure as an Ethernet IP Router 32

Define an IP Default Gateway 34

Define an IP Static Route 35

Define an IP Subnet Mask 36

Configure as an Ethernet IPX Router 39

Novell Servers in Both Locations 39

Novell Servers in One Location Only 41

PPP Link Configuration Overview 43

Numbered Links 43

Unnumbered Links 44

Configure Dynamic Host Configuration Protocol 45

Configure Network Address Translation (NAT) 47

Configure PPP Security 49

Configure Firewall 51

Configure Remote Site Profiles for PPPoE 55

QOS - Priority Queuing 59

Simple Network Time Protocol 61

3 - INTRODUCTION TO FILTERING 64

MAC Address Filtering 64

Pattern Filtering 65

Popular Filters 68

Bridge 68

IP & Related Traffic 68

Novell IPX Frames 68

NetBIOS &NetBEUI (Microsoft Windows) 68

Banyan 69

IP Router 69

NetBIOS over TCP 69

Other interesting TCP Ports 69

APPENDIX A MENU TREES 70

APPENDIX B OCTET LOCATIONS ON ETHERNET

FRAMES 73

Octet Locations on a Bridged TCP/IP Frame 74

Octet Locations on a Bridged Novell Netware Frame 74

ETHERNET Type Codes 75

Octet Locations on an IP Routed TCP/IP Frame 76

Octet Locations on an IPX Routed Novell Netware Frame 76

Octet Locations on a Bridged XNS Frame 77

APPENDIX C SERVICING INFORMATION 78

Opening the case 78

Identifying the Internal Components 79

Sanity Timer 81

Force ZMODEM Software Load 81

To Clear a “Lost” Password 81

Connecting to the Console Connector 82

WAN Interface Connection 83

Pinout Information 83

V.35 Module: 83

CSU/DSU Module: 83

T1/E1 Module: 84

UNIVERSAL WAN Module: 85

Contents

V.35 Link Pinouts 86

RS232C / V.24 Link Pinouts 88

RS530 / RS422 Link Pinouts 89

V.11 / X.21 Link Pinouts 90

V.11 / X.21 DB25 to DB15 Connector Cable 91

V.35 Null-Modem Cable Configuration 92

The link speed must be defined for each of the two units. 92

RS232 / V.24 Null-Modem Cable 93

RS530 / RS422 Null-Modem Cable 94

APPENDIX D SOFTWARE UPGRADES 96

1 - INSTALLATION

The P850 is an Ethernet Bridge/Router that provides bridging,

IP/IPX routing, and compression over a frame relay permanent virtual

circuit or a PPP leased line circuit..

The following instructions provide a quick set-up guide for installation

of the P850 router

Unpack the P850

Rough handling during shipment can damage electronic equipment.

As you unpack the router, carefully check for signs of damage. If

damage is suspected, contact the shipper. Save the box and all packing

material to protect the router should it ever need to be moved or

returned for service.

Check the packing slip that identifies the components and the LAN

connector. The connectors on the rear of the router provide all

external connections to the P850 router.

Select a Site

Place the router in a well-ventilated area. The site should maintain

normal office temperature and humidity levels. Air vents located on

the rear of the router must have an inch or so of clearance from any

object. Units should not be stacked.

Altri manuali per PERLE P850

Indice

Altri manuali Perle Router di rete

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza