Perlegear PGTVMC04 Manuale utente
Mobile TV Cart Instruction Manual
Model: PGTVMC04
V4.0 (A)
English --------------------------------- 01-15
日本語 --------------------------------- 16-30
Thank you for choosing this Perlegear product! At Perlegear we strive to provide
you with the best quality products and services in the industry. Should you have any
issues, please don't hesitate to contact us at
Technical Support:
(US/CA)1-800-456-5231 Mon-Fri 8am - 8pm(CST)
Other Info:
[email protected](US/CA）
01
Minimum VESA pattern: 100mm/4 in (W)x100mm/4 in (H)
200 mm ≈ 7 7/8 in
400 mm ≈ 15 3/4 in
100 mm ≈ 4 in
300 mm ≈ 11 3/4 in
MAX: 400mm/16 in
MAX: 400mm/16 in
Check the VESA Pattern of Your TV before the Installation
If your TV VESA is greater than 400x400 mm/16x16 in or less than VESA
100x100 mm/4x4 in , this TV cart is NOT compatible.
If this TV cart is NOT compatible, please contact customer service at
[email protected] to find a compatible product.
Important Safety Information
• Please read through these instructions completely before attempting
installation. If you do not understand the instructions or have any concerns
• Check package contents against Supplied Parts and Hardware List to
assure that all components were received undamaged. Do not use
damaged or defective parts. lf you require replacement parts, contact
• Not all parts and hardware included will be used.
• Do not use this product for any purpose or in any configuration not
explicitly specified in this instruction. We hereby disclaim any liability for
injury or damage arising from incorrect assembly or incorrect use of this
product.
● Serious or fatal crushing injuries can occur from tip over. To help prevent
tipping over:
● Never allow children to climb, stand, hang, or play on any part of TV or TV cart.
● Use tip over restraint or anchor to attach the TV cart to wall.
● Use of tip over restraints may only reduce, but not eliminate risk of tip over.
Tip Over Warning
02
03
07
09
06
05
04
A
B
C
02
01
15
13
08
10
14
C
D
11
E
12
C
03
(4pcs) TV2 (4pcs)
M6x15mm
Bolt
TV3 (4pcs) TV4 (4pcs)
M6x30mm
Bolt
TV5 (4pcs)
M8x50mm
Bolt
M8x25mm
Bolt
TV7 (4pcs) TV8 (4pcs)
M8 13mm
Spacer
TV9 (8pcs) TV10 (4pcs)
5mm
Spacer
20mm
Spacer
Hardware for Attaching TV Brackets to TV
A (8pcs)
M6x60mm
04 (1pc)
08 (2pcs)
14 (1pc)
06 (1pc)
H (1pc)
09 (1pc)
01 (2pcs) 02 (2pcs) 03 (4pcs)
C (12pcs)
M6x10mm
E (4pcs)D (4pcs) F (1pc) G (1pc)
15 (2pcs)
10 (1pc) 11 (2pcs)
13 (1pc)
Supplied Parts and Hardware
Supplied Parts
Hardware for Assembling the TV Cart
Phillips Screwdriver
Tools Needed (Not lncluded)
M6 M6 4mm 5mm
10mm
14mm
TV1
Tube Connector
Long Square
Tube
Short Square
Tube Caster
Lower Pole
with Holes Pole Cover
Upper pole
without holes
TV Plate TV Bracket
Shelf
Washer Nut
Bolt Small
Allen Key
Large
Allen Key Wrench
Washer
Tube Connector
Cover
05 (1pc)
Pole Connector
07 (1pc)
TV Plate Connector
& Pad
Shelf Support
Shelf Support
Connecting Plate
M4x15mm
Bolt
Bolt
B (4pcs)
M6
Socket Plate
12 (1pc)
TV6 (4pcs)
M6
Washer
04
Step 1
Step 2
x2 x2
x4 x1
Long Square
Tube
Short Square
Tube
01 02
03
M6x60mm
Bolt
M6
Socket Plate
Secure Casters [03] to the square tubes [01]
and [02] by using the provided wrench [H]
Turn this nut to adjust the height of caster [03]
Step1-1
Step1-2
Secure the Casters to the Square Tubes
Casters Wrench
x1 x8
x4 x1
04
04
Secure the square
tubes [01] and [02] to
the tube connector
[04] using bolts [A] and
socket plate [B]
A
G
Front
BACK
Tube Connector
Secure the Casters to the Square Tubes
H
01
02
03
03
35/64 in (14mm)
Wrench
13/64 in (5mm)
Large Allen Key
B
A
13/64 in (5mm)
Large Allen Key
B
01
02
G
05
Step 3 Secure the Poles [06] and [09] to the Base
x1
05
x1
x1
07
x2
Lower Pole
with Holes
Upper Pole
without Holes
x1
09
Pole Connector
C
1. Attach tube connector cover [05] to the tube connector [04].
2. Secure the lower pole [06] to the tube connector [04] using bolts [C].
3. Insert the pole cover [08] into the top of the pole [09].
4. Thread the pole connector [07] to the top of the lower pole [06]. Thread the
pole [09] to the pole connector [07].
x2
M6x10mm
Bolt
Tube Connector
Cover
x1
5/32 in (4mm)
Small Allen Key
F
08
06
Pole Cover
C
07
06
09
08
09
06
05
04
5/32 in (4mm)
Small Allen Key
Warm Tips:
It is recommended to wear a pair of gloves
to avoid hurting you hands while assembling.
F
06
Step 4 Secure Square Plate to Upper Pole [09]
x1 x1
x4 x1
TV Plate
13 14
D
4.1
C
D
4.2 Secure the TV plate [14] to TV plate connector [13] using bolts [C] and washers [D].
Slide the TV plate connector and pad
[13] over the top of the pole [09] and
secure the connector using Small Allen
Key [F].
TV Plate Connector
& Pad
M6
Washer
13
13
14
09
09
5/32 in (4mm)
Small Allen Key
5/32 in (4mm)
Small Allen Key
5/32 in (4mm)
Small Allen Key
F
x4
M6x10mm
Bolt
C
Note:Please make sure you have tightened
the bolt before hanging your TV/monitor.
F
07
Step 5
Secure the Brackets to the TV
Note: The bolts are shown in accordance with the actual size
M6 TV2 x4
M6 x 15mm
TV3 x4
M6 x 30mm
M4 TV1 x4
M4 x 15mm
M8
TV4x4
M8 x 25mm
TV5 x4
M8 x 50mm
X2
TV Bracket
15
Note: The washer and spacers are shown in accordance with the actual size
TV6x4
M6 Washer
TV7 x4
M8 Washer
TV Bolts
08
Only one bolt size fits your TV.
M6M4 M8
Bolt length:Verify adequate thread engagement with bolts or bolts/spacers combination.
We recommend thread engagement by at least 5 turns.
-Too short will not hold the TV.
-Too long will damage the TV.
Too Short Too Long Correct Correct
Select TV Bolts
CAUTION: Ensure the TV brackets
15 are EQUALLY CENTERED on your
TV and securely fastened in place.
15
UP
TV9 x8
5mm Spacer
TV10 x4
20mm Spacer
TV8 x4
Spacers
[if needed]
13mm Spacer
09
Option B (For Round Back TV)
Option A (For Flat Back TV)
(If needed)
TV1/TV2/TV4
TV8/TV9
TV6/TV7
15
15
10
TV1/TV3/TV5
TV8/TV9/TV10
TV6/TV7
10
Please note: The bolt hole locations
on your TV may vary in accordance of
the manufacturers design of the TV. We
are only illustrating possible locations
of the bolt holes.
Alternate Spacer Setups
Alternate Spacer Setups
Indice
Altri manuali Perlegear Supporto TV
