PERLESSMITH PSXFK1 Manuale utente
PSXFK1
V1.0
EXTRA LARGE FULL-MOTION TV WALL MOUNT
English --------------------------------- 01-09
Deutsch --------------------------------- 10-18
Français --------------------------------- 19-27
Español --------------------------------- 28-36
Italiano --------------------------------- 37-45
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
P1
WARNING:
!165 lbs
Getting Started
Tools Needed
CAUTION! MAXIMUM WEIGHT CAPACITY
Exceeding the weight capacity can result in serious personal injury or damage
to equipment! It is the installer’s responsibility to make sure the weight of the
TV (including accessories) does not exceed 75 kg.
WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE CAN
RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY. READ THE
FOLLOWING WARNINGS BEFORE BEGINNING.
If you do not understand the instructions or have any concerns or questions,
please contact a qualified installer.
Do not install or assemble if the product or hardware is damaged or missing.
Not all parts and hardware included will be used. If you require replacement
parts, contact customer service at [email protected]
This product may contain moving parts. Use with caution.
DO NOT EXCEED THE MAXIMUM WEIGHT CAPACITY FOR THIS PRODUCT.
Please check www.perlesmith.com for more products and company
information.
Stud Finder Tape Measure Pencil Level (included
inside the box)
Drill
7/32 in.(5.5 mm)
Wood Drill
25/64 in.(10 mm)
Concrete Drill
1/2 in. (12.7 mm)
Screw Driver
Screw Driver Hammer
P2
Arm and Wall Plate
TV Brackets
01 x1
Front Support
02 x1
03 x2
5/16 x 3½ in
(ST8x90mm)
Lag Bolts
x4
Wall
Anchor
x4
DA
Washers
Ø8mm
Allen
Wrench
x4
B
WARNING:
Hardware for Attaching Wall Plate to Wall
Philips Screws
M6 x 15mm
M6 x 30mm
Philips
Screws
M6 x 50mm
Washers
Ø6mm
M4-5-6
Spacers
L10mm
x4x4
Philips Screws
M8 x 15mm
M8 x 45mm
x4
x4 x8 x4
M-DM-A M-B
x4
M-C M-E
Philips
Screws
M8 x 65mm
x4
M-F M-G M-H
Spacers
L5mm
x8
M-I
TV Screws / Washers
x1
C
End Caps
04 x2
16“
24“
Parts List
This product contains small
items that could be a choking
hazard if swallowed. Before
starting assembly, verify all
parts are included and
undamaged. If any parts are
missing or damaged, do not
return the damaged item to
your dealer; please contact our
customer service team. Never
use damaged parts!
NOTE: Not all parts and
hardware included will be used.
CAUTION!
These anchors are
for concrete or
brick walls ONLY.
DO NOT use them
in drywall or wood
studs.
P3
Correct Correct
Too Long
Too Short
M6 M8
STEP 1-1 Select TV Screw Diameter
STEP 1-2 Select TV Screw Length
STEP 1-3 Attach the TV Bracket
Thread screws by hand into the threaded holes on the back of your TV to select which screw
diameter fits your TV.
Position your TV brackets over your TV hole pattern - making sure the
brackets are centered and level over the TV hole pattern.
Secure the brackets using your screw/washer/spacer selection:
(a) for Flat Back
(b) for Round Back / Extra space
CAUTION:
Ensure TV bracket is securely fastened before moving on to the
next step.
P4
03
03
M-A M-D
M-H
M-B M-C
M-E
M-F
M-H
M-G M-I
M-G M-I Use spacers (M-G, M-I) to
increase extra space for inserting
cables
(a) Flat Back
(b) Round Back / Extra Space
STEP 2A Solid Concrete or Concrete Block Option
STEP 2 Attach Wall Plate to Wall
Avoid potential personal injury or property damage! All lag bolts [A] MUST BE firmly
tightened to prevent unwanted movement of the wall plate [01] .
For concrete installations, follow STEP 2A
For wood stud installation, follow STEP 2B
WARNING:
Wall
Anchor
D
P5
Drill pilot
holes
2A-2
3.75in 95 mm
Ø 10 mm
Ø 10 mm
2A-3
Concrete Wall
Concrete Wall
D
01
D
AB
2A-1 Position the
wall plate
at your
desired
height , level
the wall plate
and mark the
pilot hole
locations.
01
WARNING:
Ensure the wall plate is securely fastened to the wall before
continuing on to the next step.
WARNING:
Avoid potential personal injuries and property damage!
● Mount the arm assembly/wall plate [01] directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
Install wall plate [01] using lag bolts [A]
and washer [B] and anchor [D].
Tighten the lag bolts until they are
pulled firmly against the wall plate [01].
P6
2B-1
2B-2
Position the wall plate
[01] at your desired
height and line up the
holes with your stud
center line. Level the
wall plate and make the
holes.
Locate your studs. Verify and
mark the center of the studs
by finding the stud edges
using an awl, a thin nail, or an
edge-to-edge stud finder.
24 in
(610mm)
01
WARNING:
Ensure the wall plate is securely fastened to the wall before continuing on to the
next step.
STEP 2B Wood Stud Option
Avoid potential personal injuries and property damage!
● Drywall covering the wall must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in.
(38 x 89 mm)
● Stud center must be verified
WARNING:
Avoid potential personal injury or property damage! All lag bolts [A] MUST
BE firmly tightened to prevent unwanted movement of the wall plate [01] .
WARNING: X
Install wall plate [01]
using lag bolts [A] and
washer [B]. Tighten the
lag bolts [A] until they
are pulled firmly against
the wall plate [01.
P7
Install the end caps [04] to Front support [02] with the
preassembled screws.
3-1
Pre-assembled scews
Finished
04
02
2B-4
01
2B-3
7/32 in.
Ø5.5 mm
3 3/4in 95 mm
2
1
AB
Pilot holes must be drilled to a depth of 3 3/4 in. (95 mm). Be sure to
drill into the center of the stud.
STEP 3 Install Front Support and End Cap Together
IMPORTANT:
Drill pilot holes using a 7/32 in.
(5.5 mm) diameter drill bit.
P8
3-2
Hang [02] onto [01] and using a screwdriver, secure with the
preassembled screws [S1]
S2
Remove the
preassembl
ed screws
[S2] and
save to use,
then raise
the safety
locks.
Press the safety locks
then fasten the
removed screws [S2].
S1
01
02
03
02
01
S2
01 0302
STEP 4 Hang TV with Brackets [03] onto the Front Support [02]
safety lock
P9
Adjustments
[S1]
To adjust the tilt in both sides, loosen both tilt nuts and
move panel to desired position. Tighten both tilt nuts to
hold desired tilt.
TO ADJUST TV LEVEL, loosen the two both screws [S1]
on the rear of the arm plate, adjust level, and retighten
both screws [S1] to secure.
！
Tighten
C
！
Loosen
C
TIGHTEN
± 3°
Tilt Nut
Indice
Lingue:
